• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.133-140
• /
• 1998

The following conclusions are based upon data collected and visual observations made during the performance of the tests : 1. The performance of the erosion control products tested was for a particular set of conditions, and may be expected to differ if any or all of the test parameters were to be changed. If even just one parameter is changed from one test to the next, the results can be expected to be different. 2. Due to the fact that only two replications of each product were tested, we believe that the results presented herein are indicative only and not conclusive. 3. The ECB SC produced the least amount of soil erosion followed by ECB S, ECB C, and Coir No. 2, in that order. 4. All of the erosion control blankets tested significantly reduced soil erosion rates with respect to the bare soil controls. 5. The ECB S produced the smallest water runoff rate, followed closely by ECB SC. Next in order were ECB C and Coir No. 2. 6. All of the erosion control blankets reduced the water runoff rate with respect to the bare soil control. 7. Mesh 2cm There was not much difference in plant height for the four erosion control blankets and the bare soil control plots. the ECB S produced slightly taller plants than the rest of the materials tested. 8. The four erosion control blankets(ECB C, ECB SC, ECB S, and Coir No. 2) produced a larger plant mass than the bare soil plots. The difference between the plant mass for the four erosion control blankets, however, is minimal. 9. The ECB C produced the least percentage of lost seed and the largest percentage of germinating seed. 10. The ECB SC had the second smaller percentage of seed lost, followed closely by ECB S, and then by Coir No. 2. 11. All erosion control blankets had a smaller percentage of seed lost than the bare soil control plots. 12. The ECB C had the second largest percentage of germinating seed, followed closely by ECB SC and Coir No. 2. 13. All erosion control blankets had a larger percentage of germinating seed than the bare soil control plots. 14. The ECB C had the smallest percentage of non-germinating seed, followed by ECB S, Coir No. 2, and ECB SC, in that order. 15. All erosion control blankets had smaller percentages of non-germinating seed than the bare soil control plots.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.672-680
• /
• 2017

Today the distribution of characters in the consumer market based on digital smart phones is expanding, and the characters themselves are sold with independent merchandise, also various application researches about character are being activated. However, depending on the style of worker 's work on the design process of Korea and China regarding characters, there are differences in design characteristics and the diversity of work. In this study, we attempted to investigate the implications of these designers on the development of creative character design through in-depth research and experiment. Therefore, previous researches of cognitive science were investigated and cognitive experiments were conducted on design process for experts. For this research experiment, the initial sketch stage in the character work of Korea and China was recorded by the method of the designer by the subject through the protocol analysis method which is the qualitative research method. We coded the collected language based on this recording experiment and analyzed the problem behavior. We examined how the cognitive acts are done by the designer to develop the characters. The behavior characteristics and the accidental characteristics. The differences of the behavioral characteristics and the accidental characteristics in each step of the character design process were identified. Through these cognitive experiments, we could examine the behavior analysis of the design thinking process in Korea and China. In the field of design practice, we can set the direction of the design work process of the two countries and help us to produce creative and individual results. I think. These studies are expected to contribute to practical application of product marketing and new cooperation development methods in terms of activation of character industry in the future.

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.195-214
• /
• 2017

Statistical landslide susceptibility analysis, which is widely used among various landslide susceptibility analysis approaches, predicts the unstable area by analyzing statistical relationship between landslide occurrence locations and landslide controlling factors. However, uncertainties are involved in the procedures of the susceptibility analysis and therefore, fuzzy approach has been used to deal properly with uncertainties. The fuzzy approach used fuzzy set theory and fuzzy membership function to quantify uncertainties involved in landslide controlling factors. Various fuzzy approaches were suggested in the procedure of the membership value determination and fuzzy operation in the previous researches. However, few studies were carried out to compare the analysis results obtained from various approaches for membership function determination and fuzzy operation. Therefore, in this study, the authors selected Jinbu area, which a large number of landslides were occurred at in 2006, to apply two most commonly used methods, the frequency ratio and the cosine amplitude method to derive membership values for each controlling factor. In addition, the integration of different thematic layers to produce landslide susceptibility map was performed by several fuzzy operators such as AND, OR, algebraic product, algebraic sum and Gamma operator. The results of the landslide susceptibility analysis using two different methods for the determination of fuzzy membership values and various fuzzy operators were compared on the basis of ROC graph to check the feasibility of the fuzzy based landslide susceptibility analysis.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.447-458
• /
• 2002

In this paper, we design and implement Wireless Transaction Protocol(WTP) and evaluate it for wireless transaction processing in mobile computing environments. The design and implementation of WTP are based on the coroutine model that might be suitable for light-weight portable devices. We test the compatibility between our product and the other products such as Nokia, Kannel and WinWAP For the evaluation of WTP, we use an Internet simulator that can arbitrary generate random wireless errors based on the Gilbert model. In our experiment, the performance of WTP is measured and compared to those of Transmission Control Protocol(TCP) and TCP for Transactions. The experiment shows that WTP outperforms the other two protocols for wireless transaction processing in terms of throughput and delay. Especially, WTP shows much higher performance In ease of high error rate and high probability of burst errors. This comes from the fact that WTP uses a small number of packets to process a transaction compared to the other two protocols and introduces a fixed time interval for retransmission instead of the exponential backoff algorithm. The experiment also shows that the WTP performance is optimized when the retransmission counter is set to 5 or 6 in case of high burst error rate.

• Korean Journal of Veterinary Research
• /
• v.44 no.4
• /
• pp.655-662
• /
• 2004

The aim of this work was the validation of a rapid real-time PCR assay based on TaqMan technology for the unequivocal identification of infectious canine hepatitis (ICH) virus, to be used directly on DNA purified from blood specimens. A real-time PCR system targeting at the E3 ORFA gene sequence of canine adenovirus type 1 was optimized and validated through comparative analysis of samples using conventional PCR system. The real-time PCR assay based on TaqMan technology could disclose 23 (37.7%) out of 61 samples as PCR positive. In contrast, 18 (29.5%) samples were found PCR positive when conventional PCR was applied on these samples. The use of the ABI Prism 7700 sequence detection system allowed the efficient determination of the amplified product accumulation through a fluorogenic probe. The entire real-time TaqMan PCR assay, including DNA extraction, amplification, and detection could be completed within 3 hours. The detection method of real-time TaqMan PCR assay was 1,000 times more sensitive than conventional PCR. Real-time TaqMan probe and primer set developed and optimized in this study is a sensitive, rapid and accurate method for detection of ICH virus and can be effective screening tool for the detection of ICH in a diagnostic laboratory routines.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.171-177
• /
• 2002

We, Tong Yang Moolsan Co. Ltd. (TYM) set up the mass-production system for virus-free seed garlic via tissue culture technique. TYM's tissue culture technique is called as 'Multiple shoot propagation technique' This technique can lead mass propagation of genetically homogeneous seed garlic in a short period because of its highly proliferation rate of in vitro shoots (15/sup 10//year). TYM researchers applied the technique to some selected garlic cultivars with superior characteristics and carried out field test of productivity in the inside and outside of the country for several years. According to the yearly results of field test with virus-free seed garlic, we ascertained that virus-free seed garlic can produce the highly yield increase (max. above 50%) and also can enhance the product quality. Consequently, we estimated that TYM's seed garlic will contribute to farmers with increase of income and can elevate the national position of garlic market in the world for its competitive power of technical and production cost.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.18-26
• /
• 2016

The semiconductor industry is one of the key industries of Korea, which has continued growing at a steady annual growth rate. Important technology for the semiconductor industry is high integration of devices. This is to increase the memory capacity for unit area, of which key is photolithography. The photolithography refers to a technique for printing the shadow of light lit on the mask surface on to wafer, which is the most important process in a semiconductor manufacturing process. In this study, the width and step-height of wafers patterned through this process were measured to ensure uniformity. The widths and inter-plate heights of the specimens patterned using photolithography were measured using transmissive digital holography. A transmissive digital holographic interferometer was configured, and nine arbitrary points were set on the specimens as measured points. The measurement of each point was compared with the measurements performed using a commercial device called scanning electron microscope (SEM) and Alpha Step. Transmission digital holography requires a short measurement time, which is an advantage compared to other techniques. Furthermore, it uses magnification lenses, allowing the flexibility of changing between high and low magnifications. The test results confirmed that transmissive digital holography is a useful technique for measuring patterns printed using photolithography.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.992-997
• /
• 2002

Contents of heavy metals in sugar products were estimated to provide a scientific basis for standardization of Korea Food Code of heavy metals. The contents of mercury (Hg), lead (Pb), cadmium (Cd), arsenic (As) and copper (Cu) were determined in 285 sugar product samples using a mercury analyzer, atomic absorption spectrophotometer, and inductively coupled plasma spectrometer. The values of heavy metals in sugar products $[minimum{\sim}maximum\;(mean),\;mg/kg]$ were as follows: $Hg,\;N.D.{\sim}0.006 (0.001);$ $Pb,\;N.D.{\sim}0.47 (0.03);$ $Cd,\;N.D.{\sim}0.06(0.005);\;As,\;N.D.{\sim}0.10(0.004);\;Cu,\;N.D.{\sim}1.89(0.15)$. These results show that metal contents of domestic sugar products are similar to those reported in other countries. Weekly average intakes of lead, cadmium, and mercury from sugar products were $0.004{\sim}0.1%$ of Provisional Tolerable Weekly Intake set by FAO/WHO Joint Food Additives and Contaminants Committee to evaluate the safeties of sugar products.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.105-118
• /
• 2015

Purpose - The objective of this study is to verify whether there are differences between Korean and Chinese consumers in the importance of the attributes such as shopping value and loyalty in social commerce. With the purpose of finding out these differences, the following questions are set up as research questions. First, will there be a difference between Korea and China in the importance of attributes of social commerce? Second, will there be a difference between Korean and Chinese consumers in shopping value? Third, will there be a difference between Korean and Chinese consumers in their loyalty? Research design, data, and methodology - The researchers collected data through self-administered questionnaires from Korean and Chinese consumers who had used social commerce within the past six months before answering the questionnaire. First, for social commerce users in Korea, comprising male and female university students in Chungcheong, a questionnaire was circulated. For social commerce users in China, university students within Beijing were surveyed. Responses to 336 questionnaires were used, excluding those with no answers or unreliable answers. Data coding and data cleaning were used. SPSS 18.0 was used. First, exploratory factor analysis is done to verify the validity of testing tools, and Cronbach's α coefficient is used to verify credibility. For factor analysis, the Varimax method is used. To verify the internal consistency reliability of each factor, the Cronbach's α coefficient is used to verify the credibility. Second, a T-test is done to verify differences between Korean and Chinese consumers for the importance of attributes. Third, ANOVA (Analysis of variance) is done to verify differences between Korean and Chinese consumers in shopping value and loyalty. Results - When Korean and Chinese consumers use social commerce, first, the importance of the attributes of social commerce is affected by four factors; playfulness and economic factors are more important to Korean consumers than Chinese consumers. As for informativeness factors, including product information and quality, and buyer comments, there was no confirmed difference between Korean and Chinese consumers. The convenience factor is more important to Chinese consumers than Korean consumers. Second, the factors affecting shopping value for Korean and Chinese consumers were hedonic shopping value and rational shopping value. To see the difference between Korean and Chinese consumers in shopping value factors, a t-test is conducted. As a result, in the rational shopping value factors of social commerce, Korean consumers scored higher than did Chinese consumers. These results were verified to be meaningful through statistics. In the hedonic shopping value factor of social commerce, Korean consumers scored higher than Chinese consumers. These results showed a significant difference. Third, loyalty in social commerce is higher for Chinese consumers than for Korean consumers. However, there is no difference in loyalty depending on sex. Conclusions - These results will hopefully be valuable and used in the future by Korean companies that wish to enter the Chinese social commerce market.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.47-55
• /
• 2015

Purpose - The objective of this study is to verify whether there are differences between Korean and Chinese consumers in the importance of the attributes such as shopping value and loyalty in social commerce. With the purpose of finding out these differences, the following questions are set up as research questions. First, will there be a difference between Korea and China in the importance of attributes of social commerce? Second, will there be a difference between Korean and Chinese consumers in shopping value? Third, will there be a difference between Korean and Chinese consumers in their loyalty? Research design, data, and methodology - The researchers collected data through self-administered questionnaires from Korean and Chinese consumers who had used social commerce within the past six months before answering the questionnaire. First, for social commerce users in Korea, comprising male and female university students in Chungcheong, a questionnaire was circulated. For social commerce users in China, university students within Beijing were surveyed. Responses to 336 questionnaires were used, excluding those with no answers or unreliable answers. Data coding and data cleaning were used. SPSS 18.0 was used. First, exploratory factor analysis is done to verify the validity of testing tools, and Cronbach's α coefficient is used to verify credibility. For factor analysis, the Varimax method is used. To verify the internal consistency reliability of each factor, the Cronbach's α coefficient is used to verify the credibility. Second, a T-test is done to verify differences between Korean and Chinese consumers for the importance of attributes. Third, ANOVA (Analysis of variance) is done to verify differences between Korean and Chinese consumers in shopping value and loyalty. Results - When Korean and Chinese consumers use social commerce, first, the importance of the attributes of social commerce is affected by four factors; playfulness and economic factors are more important to Korean consumers than Chinese consumers. As for informativeness factors, including product information and quality, and buyer comments, there was no confirmed difference between Korean and Chinese consumers. The convenience factor is more important to Chinese consumers than Korean consumers. Second, the factors affecting shopping value for Korean and Chinese consumers were hedonic shopping value and rational shopping value. To see the difference between Korean and Chinese consumers in shopping value factors, a t-test is conducted. As a result, in the rational shopping value factors of social commerce, Korean consumers scored higher than did Chinese consumers. These results were verified to be meaningful through statistics. In the hedonic shopping value factor of social commerce, Korean consumers scored higher than Chinese consumers. These results showed a significant difference. Third, loyalty in social commerce is higher for Chinese consumers than for Korean consumers. However, there is no difference in loyalty depending on sex. Conclusion - These results will hopefully be valuable and used in the future by Korean companies that wish to enter the Chinese social commerce market.