• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.6
• /
• pp.78-82
• /
• 1995

It is needed to robust control for D.C. servo motor according to industrial automation. However, when a motor has an effect of disturbance and variable load, it is very difficult to guarantee the robustness of the system. as a compensation way of solving this problem, in this paper, a expert supervisory control method for motor control system is presented. Expert supervisory controller is designed by error and error change, and nth control input is decided by the addition of (n-1)th control input and inference amount of increase or decrease. Control input of expert supervisory control is transmitted to input, and the disturbance effect decrease remarkable by control input. The robustness of D.C. servo motor using expert supervisory control is demonstrated by the computer simulation.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.155-162
• /
• 2006

Because of their lower cost, higher speed, and longer travel, a belt drive system are quite desirable over screw driven system. However, a belt drive system are inherently difficult to control due to belt flexibility, friction, vibration, backlash and other non-linearities. This thesis presents servo control algorithm and the designing method of controller appliable to a belt drive system. In this paper, a LQ servo controller for a belt drive system is proposed to accomplish an optimal design of improved control system. In this scheme a mathematical model for the control system is obtained in state space form. Finally, the effectiveness of the proposed servo controller was verified through the computer simulation results.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.22-28
• /
• 1998

This paper includes AC servo motor speed control usig the predictive control strategy. Generally, AC servo motor control should have the fast response characteristics. For the issue, sliding mode control and PID control have been applied. However, the former has the speed ripple response due to the chattering and the latter requires the many trial efforts. Originally, the predictive control which has been used in process control area does not need the priori knowledge for the application system and it is easy to compute the optimal gain with the prediction. In this paper, the TMS320C31 DSP pocessor is used for AC motor control with fst dynamics and the tuning guid-line for the parameters of the predictive control algorithm is given in order to reduce the computation load. Also, the actuator saturationis implemented uisngthe QP(Quadratic Programming) method and the transient response is improved by the identified intertia coefficient when AC motor is drived at forward/reverse rotation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.139-146
• /
• 1998

In this paper, we proposed the hybrid intelligent control method for fast response time and precise speed control of the AC Servo system. The proposed system first used the fuzzy-neural network control methods for fast response time and when the error reaches the preset value, used the PLL control method. In order to verify the advantage of he proposed method, the system is implemented. The results of the simulation and the experiment of speed control to use the 3-phase induction motor as a plant, we verified excellency of the proposed control method to compare with the conventional fuzzy-neural network control method.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.69-71
• /
• 2004

DC servo motors have a defect that they need a periodical maintenance because of a brush commutation and also they have a difficulty at high speed operation. In this reason, the use of AC Servo motors are increasing these days. In this paper, a proposed neuro observer is applied to speed control of AC servo motor. The proposed observer complement a problem that occur from increase of gain of High-gain observer in proportion to the square number of observable state variables. And also, the proposed observer can tune the gain obtained by differentiating observational error automatically by using the backpropagation training method to stabilize the observational speed. The excellence and feasibility of the proposed observer is proved by making a comparison test between the proposed observer and the others applied to the same AC servo motor.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.69-71
• /
• 2005

DC servo motors have a defect that they need a periodical maintenance because of a brush commutation and also they have a difficulty at high speed operation. In this reason, the use of AC Servo motors are increasing these days. In this paper, a proposed neuro observer is applied to speed control of AC servo motor. The proposed observer complement a problem that occur from increase of gain of High-gain observer in proportion to the square number of observable state variables. And also, the proposed observer can tune the gain obtained by differentiating observational error automatically by using the backpropagation training method to stabilize the observational speed. The excellence and feasibility of the proposed observer is proved by making a comparison test between the proposed observer and the others applied to the same AC servo motor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.10
• /
• pp.899-906
• /
• 2004

In this paper, fault tolerant algorithm is presented for a servo manipulator system. For fault tolerance of a servo manipulator system, reconfiguration algorithm accommodating a motor's failure has been presented. The algorithm considers a transport's degree of freedoms as redundant joints of a servo manipulator. The reconfiguration algorithm recovers the end effector's motion in spite of one motor's failure A modified pseudo inverse redistribution method has been proposed for the reconfiguration algorithm. Numerical examples and hardware tests have been presented to verify the proposed methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.348-353
• /
• 1994

Magnetic Servo Levitation (MSL) has been proposed as a method to drive a fast-tool servo system. This paper discusses some fundamental control and modeling issues in the development of a long-range high-bandwidth fast-tool servo based on MSL. A resursive linear model is developed to describe the system's dynamics linear model is developed to describe the system's dynamics, and further used to discuss controller design. For a given controller architecture, the performance of two controllers is then compared, one based on an approximation to the inverse plant dynamics, the second based on a adaptive neural network.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.1
• /
• pp.1-4
• /
• 2007

A high density optical data storage device has been required for many years. In the field of the optical data storage, a near-field recording (NFR) technology is considered as a next generation one for achieving the high data density. Due to an evanescent wave effect occurred under 100nm distance which is the excessively small distance between the SIL and the disc, the most significant and difficult problem in this technology is to maintain a gap between a solid immersion lens (SIL) and a disc. Also, maintaining the gap under at least 50nm is required in the NFR gap servo system to use the evanescent wave effect efficiently. There are some institutes that have shown the novel gap servo control. In general, they use a mode switching servo method which consists of approach, hand-over and gap control mode. However there is a critical problem such as an overshoot at the tuning point from the approach mode to the hand-over mode, which may cause a collision between the SIL and the disc. In this paper, we show our NFR system and an improved gap servo system using an exponential function as the approach mode which can reduce the overshoot.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.29-32
• /
• 1989

This paper proposes new position control method for DC servo motor by PI controller adopting sliding mode control. By adding sliding mode controller to conventional PI controller good robustness is obtained with good transient response and no steady state error which are merits in PI controller. In order to use microprocessor for digital control the principles of sliding mode control conventionally explained in continous-time system are extended to discrete-time system.