• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.754-761
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen($10{\times}10{\times}0.5mm$). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at $600^{\circ}C$. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.522-529
• /
• 2004

In the grilled fish paste stored at $5^{\circ}C$, the total aerobic bacterial counts were effectively reduced by 2.5 kGy or more. In the samples stored at $30^{\circ}C$, the total aerobic bacterial counts of the samples irradiated at 7.5 kGy were below to the limit of detection (2 log CFU/g). The TBA values of the irradiated samples were considerably higher than those of the controls but not proportional to the irradiation dose. It is apparent that an irradiation treatment causes very little textural degradation and the sensorial quality of the sample was maintained by an irradiation at 7.5 kGy or more.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.141-160
• /
• 2015

IoT(Internet of Things) has become a major issue as new type of convergence technology, expending existing of USNs(Ubiquitous Sensor Networks), NFC(Near Field Communication), and M2M(Machine to Machine). The IoT technology defines as a networking for things, which can establish intelligent links collaboratively for sensing networking and processing between each other without human intervention. The purpose of this study is to investigate to forecast the future distribution changes and orientation of contribution of distribution industry on IoT and to provide the implication of distribution changes. To become a global market leader, IoT requires much more development of core technology of IoT for distribution industry, new service creation and try to use a market-based demand side strategy to create markets. So, to become a global leader in distribution industry, this study results show that first of all establishment of standardization of IoT, privacy safeguards, security issues, stability and value were more important than others. The research findings suggest that the development goals of IoT should strive to boost the creation of a global leader in distribution industry and convenience to consider consumers' demands as the most important thing.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.225-234
• /
• 2012

OSS(Open source software) pursues the freedom to have access to open source and offers several advantages, over the proprietary software, to enterprises. Based upon Rogers(1995)' innovation-diffusion process, we assume that attributes of innovations includes five characteristics of innovations: relative advantage, compatibility, complexity, trialability, and observability, and that firms' perceptions of these characteristics predict the rate of adoption of OSS. To test this hypothesis, we presents a survey result from 201 companies and institutions concerning the use of OSS. Statistical analysis shows that adoption is highly correlated with each of those characteristics of innovations, but the regression analysis indicates that only compatibility and observability have effects on the adoption of OSS. This implies that intrinsic value of OSS is important, but unless the appropriate service package for improving IT environment is provided, it is not easy to change the perspective of corporate customers more favorable toward OSS use. As a conclusion, the academic and practical implications are also discussed.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.209-225
• /
• 2004

This study shows the field of construction which was less developed in the aspect of information system in comparison to other areas needs to introduce construction information system and suggests it can make more value linked with company performance through the system. For the first step, it emphasizes the integrated enterprise approach not optimization of each sector in a company. This paper extracts the current issues of construction information from the core process of construction area and implies a driving plan and the future development plan for construction information. Antecedent studies for this drew the information structure model and the construction information-driving model of a construction company. Hence, case studies with management companies that implemented the construction information system successfully tested validity. This research brings the cases of PMS, the integrated finance system, and CRM system as successful ones.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.4
• /
• pp.717-727
• /
• 2015

Although the NutriPlus program has shown considerable evidence of enhancing users' nutritional status, the budget does not cover all eligible mothers and children. This study aimed to conduct a cost-benefit analysis of the NutriPlus program to assess its economic efficiency. 53 families with 79 users in the NutriPlus program at Daejeon Dong-gu Health Center participated in this study with informed consent. The costs and benefits were estimated from both the administrator's and users' perspectives. We converted the time cost into Korean currency based on the minimum wage in 2014. The value of nutrition education and service (B2), estimated by contingency valuation method (CVM), was counted as an economic benefit. 6 families (11.3%) were recipients of national medical care and 22 families (41.5%) paid 10% of the food package cost by themselves. The total cost was \7,450,167 and the total benefit was \12,402,239. The budget for the health center (C1+C2+C3+C4) was \5,984,381 a month. Time and transportation cost for receiving nutrition education (C6) differed significantly according to the economic status of families. Household food consumption increase (C4-B4) was 40,379 in the poverty group, which was four times more than in the other groups. The net benefit (B-C) was \4,852,172 and the B/C ratio was 1.66. Therefore, the NutriPlus program is beneficial in the economic aspect as well as in the nutritional aspect. If the enhancement of nutritional status was also considered, the total benefit would be even higher. These results confirm the legitimacy of a secure budget for the NutriPlus program. And we suggest expanding its budget to cover more eligible individuals to improve people's health and welfare.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.20-26
• /
• 2007

The characteristics of sponge cake were investigated with various flour types and amounts of ginseng powder. Sponge cake made with medium flour in combination with 2 and 4% mixtures of ginseng powder was found to be optimal as a cake flour control, being unaffected by the addition of ginseng powder. The results of alveogram showed that increment of ginseng powder decreased over pressure(P), extensibility(L) and swelling index(G) value. Farinogram, consistency, water absorption, stability, time to breakdown and the farinograph quality number all decreased with increasing ginseng powder however, the longest development time was the medium flour with a 2% ginseng powder mixture. Water activities were not significantly affected by addition of ginseng powder, however the 2% ginseng powder mixture showed a slight decrease in water activity. Addition of ginseng powder caused an increase in darkness, as well as redness and yellowness. The results of the sensory test suggest that the 2% ginseng powder mixture was preferable for the cake flour control.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.3
• /
• pp.96-107
• /
• 2006

This paper explores the benefits provided by the adoption and implementation of electronic commerce in a particular SME-intensive productive environment: the geographical cluster. This study develops a conceptual framework that highlights the six types of benefits obtained by integrating online business with offline business. Using data from 73 traditional companies in Korean port clusters, factor analysis was used to figure out six benefits including sharing information, cost savings, value-added service, customer relationship, enhanced trust, and marketing efficiency. The six empirically derived critical benefit factors were then used to examine how they improve management performance of the traditional offline companies in the cluster measured by Balanced Scorecard(BSC). According to the results, we concluded that the offline firms in the cluster can take advantages of extending to online business.

• Journal of Korean Library and Information Science Society
• /
• v.49 no.2
• /
• pp.301-326
• /
• 2018

The study is to find the possibility of cooperation between civil servants as a mediators for changing a society in a region into community of practice. "Community" is the value-oriented concept and exists in a local community, a community of practice and a organization that have the characteristic of "Community." Public libraries as "Community" have both characteristics of local community and community of practice. And public libraries as community gives public services for neighborhood region problem-solving to people. But in Korea, Residents autonomy system in Dong gives the service to people. They all conducts the business for changing a society in a region to community of Practice. Therefore the study conducted a survey about sense of community and necessity of cooperation in the business. The results are following: The group of higher awareness on community feels less needs to corporate the work in community than the group of lower awareness on community; The group of higher awareness on community or the group having more experience on community have lower job satisfaction. Therefore the motivation on working for community is needed for the mediator.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.767-771
• /
• 2008

From industrial field spearhead IT and new create an added value and market with fusion of traditional industry composition researches actively to be in the process of advancing. The application possibility of high-tech IT technique is coming to be high in construction industry. Currently, the user requirements that upgrade existing system to high-tech construction project information system combined construction CALS system applying in road/river business management service with high-tech IT such as ubiquitous and mobile techniques are increasing. Therefore, the objective of this study is to verify site application of RFID and mobile equipment for applying in high-tech field with ubiquitous and mobile techniques so that construction CALS system gets advanced increasingly.