• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1185-1192
• /
• 2003

In the component assembly and composition technique of software architecture, It is operated that the existing composition techniques based on architecture, ACME, Wright etc., used in FIFO with the direct connection structure between components through connector's Role. But, when the non-synchronizing request of components that have different characteristics occurs, the FIFO techniques is applied to the connector is difficult to process and operate effectively because of the high performance component waiting the sequence order if the low performance component is allocated first. Thus, the allocated request process according to the priority considering the characteristics of each call components in connector is necessary to improve the operation of assembled component. In this research, we extend the connector part that is available in multiplex connection structure based on existent Wright specification. For service process requested from component, the connector part is designed and implemented to operating with priority sequence through calculating the weight of CPU use rate, bean requesting process time and memory use rate among the efficiency elements of assembled components. To verify the efficiency if this designed connector, we implemented 20 samples EJB components that have different efficiency characteristics and applied these samples components to designed connector. The operating results with this designed connector show that the efficient operation of whole system is possible though the processing time takes 481ms more than the time of the existing FIFO techniques.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.471-478
• /
• 2003

Traditionally,, analysis, simulation and measurement have all been used to evaluate the performance of network protocols and functional entities that support mobile wireless service. Simulation methods are useful for testing the complex systems which have the very complicate interactions between components. To develop a mobile call simulator which is used to examine, validate, and predict the performance of mobile wireless call procedures must have the teletraffic model, which is to describe the mobile communication environments. Mobile teletraffic model is consists of 2 sub-models, traffic source and network traffic model. In this paper, we analyzed the network traffic data which are gathered from selected Base Stations (BSs) to define the mobile teletraffic model. We defined 4 types of cell location-Residential, Commercial, Industrial, and Afforest zone. We selected some Base Stations (BSs) which are represented cell location types in Seoul city, and gathered real data from them And then, we present the call rate per hour, cail distribution pattern per day, busy hours, loose hours, the maximum number of call, and the minimum number of calls based on defined cell location types. Those parameters are very important to test the mobile communication system´s performance and reliability and are very useful for defining the mobile network traffic model or for working the existed mobile simulation programs as input parameters.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.111-122
• /
• 2006

As VOD service over the Internet becomes popular, a large sealable VOD system in P2P streaming environment has become increasing important. In this paper, we propose a new proxy caching scheme, called P2Proxy, to replace the traditional proxy with a sealable P2P proxy in P2P streaming environment. In the proposed scheme, each client in a group stores a different part of the stream from a server into its local buffer and then uses a group of clients as a proxy. Each client receives the request stream from other clients as long as the parts of the stream are available in the client group. The only missing parts of the stream which are not in the client group are directly received from the server. We represent the caching process between clients in a group and a server and then describe a group creation process. This paper proposes the directory structure to share the caching information among clients. By using the directory information, we minimize message exchange overload for a stream caching and playing. We also propose a recovery method for failures about the irregular behavior of P2P clients. In this paper, we evaluate the performance of our proposed scheme and compare the performance with the existing P2P streaming systems.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.17-27
• /
• 2003

In general, an airport access system has influenced on airport terminal operation. The congestion and delay in service facilities at an airport are definitely depended on the patterns of passenger arrival behavior and time spent in a terminal. Therefore, it is necessary to analyze the passenger arrival behavior at an airport to improve the operations at passenger terminal. Passenger arrival patterns to an airport are mainly depended on factors such as the length of access time. reliability of access time. and provision of transport modes, etc. The focus of this paper is to estimate the relationship between the length of access time and passenger's total time spent to board aeroplane. For this, passenger surveys were conducted at the Gimpo International Airport for a large airport and Sacheon Airport for a small size airport. The mathematical relationship between arrival time at an airport prior to the scheduled time of departure(STD) and access time spent was then estimated. It is considered that the results of this study can be used to reduce congestion and delays, thereby to improve the efficiency of the passenger services at the airports.

• Radiation Oncology Journal
• /
• v.34 no.2
• /
• pp.88-95
• /
• 2016

Purpose: The purpose of this study was to estimate the clinical utilization of radiation therapy (RT) in Korea between 2009 and 2013. Materials and Methods: We analyzed open claims data from the Health Insurance Review and Assessment Service. The subjects were patients who had diagnostic codes C00-C97 or D00-D48 according to the 10th revision of the International Classification of Diseases, with procedure codes indicating RT treatment. Results: The total number of patients who received RT in 2009, 2010, 2011, 2012, and 2013 were 45,571, 49,593, 54,671, 59,172, and 61,485, respectively. Among them, the total numbers of male and female patients were 20,780/24,791 in 2009, 22,711/26,882 in 2010, 24,872/29,799 in 2011, 27,101/32,071 in 2012, and 27,941/33,544 in 2013. The five cancers that were most frequently treated with RT between 2009 and 2012 were breast, lung, colorectal, liver, and uterine cervical cancers. However, the fifth most common cancer treated with RT that replaced uterine cervical cancer in 2013 was prostate cancer. The three leading types of cancer among the male patients were lung, colorectal, and liver cancers, whereas in female patients, they were breast, uterine cervical, and lung cancers. The type of cancer most commonly treated by RT was cancer of the central nervous system in patients aged 20 years or less, breast cancer in patients aged 30-50 years, and lung cancer in patients aged 60 years or more. Conclusion: Data from this study provided the clinical utilization of RT in Korea between 2009 and 2013.

• Journal of the Korean Society of Radiology
• /
• v.13 no.6
• /
• pp.857-864
• /
• 2019

Many countries, including Canada, operate a sonographer license system separately from a radiological technologist license. However, in Korea, radiological technologists perform ultrasound imaging under the guidance of doctors. Therefore, in order to have the opportunity to provide a systematic education by analyzing the job competency of the radiological technologist's ultrasound imaging, based on the Canadian National Competency Profile (NCP) lists, this study measured the job content validity of the job competences and detailed competencies required for performing ultrasonography in Korea. From the results of comparing and analyzing the importance of the core competencies included in the Korean radiological technologist's job competencies and the degree of job performance, the average overall importance was 4.087, the average of overall performance was 3.640, showing that the importance was higher than the performance and that there was a statistically significant difference. In conclusion, 'A Communication', 'B Professional responsibilities', 'D Operation of equipment' and 'G Workplace health and safety' showed high job content validity. However, it is said that as 'C Patient assessment and care', 'E Critical thinking and problem solving', and 'H Image' showed low job content validity, it is necessary to seek ways to strengthen and complement these competencies.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.339-345
• /
• 2008

The heat exchanger tube in nuclear power plants is mainly fabricated from nonferromagnetic material such as a copper, titanium, and inconel alloy, but the moisture separator & reheater tube in the turbine system is fabricated from ferromagnetic material such as a carbon steel or ferrite stainless steel which has a good mechanical properties in harsh environments of high pressure and temperature. Especially, the moisture separator & reheater tubes, which use steam as a heat transfer media, typically employ a tubing with integral fins to furnish higher heat transfer rates. The ferromagnetic tube typically shows superior properties in high pressure and temperature environments than a nonferromagnetic material, but can make a trouble during the normal operation of power plants because the ferrous tube has service-induced damage forms including a steam cutting, erosion, mechanical wear, stress corrosion cracking, etc. Therefore, nondestructive examination is periodically performed to evaluate the tube integrity. Now, the remote field testing(RFT) technique is one of the solution for examination of ferromagnetic tube because the conventional eddy current technique typically can not be applied to ferromagnetic tube such as a ferrite stainless steel due to the high electrical permeability of ferrous tube. In this study, we have designed RFT probes, calibration standards, artificial flaw specimen, and probe pusher-puller necessary for field application, and have successfully carry out RFT examination of the moisture separator & reheater tube of nuclear power plants.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.339-353
• /
• 2003

The rapid increase in food borne illness outbreaks in Korea has been one of the major threats to the Nation's Health. Foodservice establishments have been identified as the major place for these outbreaks, mainly due to the lack of sanitary management and sanitary facility management practices. The purposes of the study were to develop hospital foodservice facility evaluation tools, based on the general HACCP-based standards and guidelines, for hospital food service establishments, to ensure the safety of these foodservices and to reduce the risk of food home illness. The scope of this study included: 1) an assessment of the current foodservice sanitation practices and managements for 6 general hospitals, with more than 400 beds, and 3 general hospitals, with less than 400 beds; 2) the development of foodservice establishments sanitation evaluation tools and sanitation standards, based on the HACCP system. The survey data showed varied results between the hospitals surveyed. Most of the hospital foodservice operations had many problems with ventilation and the plumbing. The total dimensional mean scores for the hospitals with more than 400 beds and less than 400 beds were 31.5 and 27.0, respectively. The highest dimension scores were for the water supply facility and lighting, with the lowest for insect and rodent control and toxic materials management. The levels of the mean scores were very low, especially for the general hospitals with less than 400 beds. These low mean scores may have arisen from critical problems within the hospital foodservice operations. The most needed facility management items for improvement were: storage shelf should be spaced 6 inches from the floor and walls, the use of three compartment sinks, utility sinks and cleaning facilities, with a floor drain for cleaning mops or liquid wastes, a ventilation hood designed to prevent dripping onto food, cooking facilities should be disassembled for washing and sanitizing, a separated hand washing sink and a sanitized food board for each area should be provided, all toxic material must have warning labels attached, and be stored in an area away from food preparation under padlock. The evaluation tool consisted of 14 dimensions, with 65 check-off items. The results of this study will provide basic facilities' guidelines to regulators, or foodservice industry personnel, wishing to build, or expend, and establish an efficient flow of food. As a result, food borne illnesses will be effectively prevented, and the Nation's health will be promoted for the development of their own sanitation standards, with a checklist for the safe production of foods.

• Journal of Gifted/Talented Education
• /
• v.26 no.3
• /
• pp.493-514
• /
• 2016

Since the Gifted and Talented Education Promotion Law was enacted 15 years ago, in Korea, gifted education in Korea has continued rapid and quantitative growth. The number of gifted classes or institutes for the gifted have increased, as well as the number of gifted education teachers increasing their participation in professional development training and educational activities. However after 2014, gifted education is somewhat shrinking. Due to the controversy of private education and expansion of social welfare in Korea, administrative and financial support for gifted education is being reduced. This study reviewed the gifted education policies promoted by successive governments and analyzed the relationship between politics and support for gifted education efforts by the government. In addition, the phenomenon of the recently shrinking gifted education in Korean society was analyzed in various aspects. These aspects include: decreasing quantitative growth due to the weakening of administrative and financial support from central and local governments on gifted education, regulations on suppressing private education, social inequality to gifted education access, and lack of solidarity in the gifted education scholastic community. Based on this analysis of gifted phenomenon, ways of developing the ideological and practical aspects of future-oriented gifted education were suggested. In the ideological dimension, it was emphasized that gifted education must move away from insularity and the adhesive perspective of Korean society on the concept of giftedness, the concept of intelligence and the recognition of the legitimacy of gifted education. On the other hand, in the practical dimension, the following points were identified: the collection of empirical data on the economic impact of gifted education, gifted education amendment of the statutes, adaptation of the gifted education program with gifted identification, diversification of gifted education service system, and actively promoting new research topics in relation to the Gifted and Talented Education.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.4
• /
• pp.273-287
• /
• 2001

In this paper, we introduce our experience for designing and implementing a media manager in the Integrated Streaming Service Architecture (ISSA) developed by the authors. The media manager is regarded as a necessary module in the ISSA framework for the following reasons. It realizes that from which locations of the media source devices, the media streams are coming. Once it knows where the origin is, the media manager should recognizes what types of stream are. After that, it performs how to chose an appropriate CODEC to handle the recognized input streams efficiently, and what type of media playback device should be selected. In order to do such a job efficiently, the proposed media manager consists of two modules source module and sink module. The major role of a media source module is to make an abstraction for the media streams that are coming from various types of media device. This, in consequence, enables a media manager to consistently handle tlle media streams without considering wherever they come from. On the other hand, the media sink module distributes the input streams to an appropriate media device to playback. One of the remarkable virtues of the proposed media manager is an ability to supporting high value-added database services since it provides an interface between the ISSA and real-time multimedia database. Also, it provides the RTP!RTSP source filter and Winamp gateway modules which allow the flexibility to the system. Moreover, the media manager can adopt any types of new media which in fact will provide scalability to the ISSA.