• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.243-257
• /
• 2013

Purpose: This study aims to analyze the factors affecting the dropout intentions of the dental technology students of a college. Methods: The subject of this study was 76 freshmen and 74 sophomores of dental technician major in an anonymous college. Results from the questionnaire called K-vision diagnosis program were computed by means of t-test, One-Way ANOVA, and correlation analysis. Results: 1. Total points of the drop out intention came to 782.14 points. Of the five categories concerned with the drop out intention, complain in college satisfaction(50.12points) was the highest and department satisfaction(47.51points) was the lowest. Of 16 subcategories, complaining in administrative supporting system proved the highest as 50.80 points and Inquiry to Professor the lowest(45.56 points). 2. Among the general characteristic gender (p<. 01), student group (p<.01), and credit (p<.05) made a meaningful statistical difference; no statistical significance was found in grade, admission, and dwellings. 3. Of the five categories, statistical significance was shown as follows; Department satisfaction (p<.01), College satisfaction (p<.05) under gender, Department satisfaction (p<.05) in grade, Academic integration (p<.01), Department satisfaction (p<.01) in credit. No statistical meaning was found in admission and dwellings. 4. Statistical significance was found under 16 subcategories as follows: Career identification(p<.01), Academic support system(p<.01), Social activity II(p<.05) in gender area, Inquiry to professor(p<.01), Learning(p<.05), Understanding learning I(p<.05) in grade area, Learning(p<.001), Career identification(p<.001), Understanding learning I(p<.01), Understanding learning II(p<.01), Inquiry to professor (p<.01), Learning ability (p<.05), Occupation (p<.05), Social Activity II(p<.05), Administrative support system (p<.05) in student group area, Credit (p<.001), Career identification (p<.01), Understanding learning I(p<.05) in credit area; admission and dwellings was statistically meaningless. 5. Of the 5 categories academic integration (r=.766) was most relevant to the dropout intention of the subjects and followed by department satisfaction (r=.735), college satisfaction (r=.554), service acceptability (r=.373), and statistical significance was shown as p<.01. Conclusion: Considering the results of this study, we are in a pressing need for the introduction of policies and programmes aiming at preventing the dropout rates of the dental technician majors at college. In tandem with this, qualitative and viable human resource management of the dental technicians should be implemented.

• Archives of design research
• /
• v.16 no.3
• /
• pp.391-400
• /
• 2003

As the change of information and digital technology progresses, ubiquitous space is attracting attention as a new space concept in which the physical and digital spaces are connected to each other. As its meaning in latin itself - 'there exist everywhere at the same time'- implies, however, the ubiquitous space has been mostly discussed in a non-physical aspect, such as in a technological area, rather than its physical intrinsic property until now. Although theories regarding a ubiquitous city have been rarity suggested, in most cases, technological aspects such as the systemization or networking of individual information service have been the focus. However, one of the intentions induced in the concept that scholars including Mark weiser and Sakamura Ken introduced was to place humans in the center of the space in which the technology has been placed instead of humans. For this purpose, the renovation of human interface must be required. As technology develops, the achievement of ubiquitous space may be possible, and efforts to apply this to real space are making an appearance. The examples of the present research are the spaces that have a characteristic of the laboratory separated from life in the city, and the construct scale is in the level of an individual facility; therefore, further studies should functionally and spaciously connect all subjects existing in space and effectively relate this to real world. The present research is intended to demonstrate the investigation on several projects that are currently underway and the developmental direction of new, ubiquitous space.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.744-754
• /
• 2017

This paper compares transport overhead of MPEG-2 TS, MMT and ROUTE in order to compare transport efficiency between the DTV and UHDTV. The MPEG-2 TS standard, widely used, was established for multiplexing and synchronizing encoded audio and video, additional information. In recent years, MMT and ROUTE was established as a next generation multimedia transport standard for the new broadcasting communication environment. In this paper, we compare and analyze transport overhead about three protocol. In order to analysis, we captured the UHD A/V stream in real-time broadcasting service using ROUTE and MMT, and we calculated and analyzed transport overhead using the overhead analysis program which was developed in our laboratory. Furthermore, for comparison under the same conditions, we assumed the MPEG-2 TS stream by extracting ES of UHD A/V stream based on the DTV standard. In this paper, we show the results of protocol transport efficiency in case of basic A/V stream except for additional services. And result show that MMT and ROUTE have similar overhead and MPEG-2 TS is relatively small overhead. However, since MPEG-2 TS result does not consider null packets, it is expected that the relative overhead difference will be reduced.

• Korean Journal of Veterinary Research
• /
• v.43 no.3
• /
• pp.423-428
• /
• 2003

The purpose of this study is to compare the morphology, general composition, elemental composition and mineral contents of Phellinus linteus, Phellinus baumii and Phellinus gilvus. In the scanning electron microscopy, P. gilvus and P. linteus had a similar shape. In the elemental composition, all of the three Phellinus spp. showed similar percent for the analyzed components. In the general composition, the water content of P. linteus. P. baumii and P. gilvus were 13%, 15% and 10%, respectively. The dietary fiber of three Phellius spp. showed more than 30%. The range of vitamin C and protein content was 1.5-2.1 g% and 3.63-3.73 g%. respectively. In mineral analysis, P. baumii of the three Phellinus spp. has the highest calcium concentration (1,135 ppm). From the above results, P. linteus. P. baumii and P. gilvus did not show any differences in the general composition and elemental composition.

• Korean Journal of Clinical Pharmacy
• /
• v.21 no.2
• /
• pp.170-181
• /
• 2011

Purpose: There is considerable variability in rates of hospitalization for patients with community-acquired pneumonia (CAP) in part because of physicians' uncertainty in assessing the severity of illness at presentation. The purpose of the study was to examine the current treatment patterns and factors influencing the Pneumonia Severity Index (PSI) and clinical outcomes in the patient with CAP. Method: The retrospective data collection of the patients with CAP was conducted and the data were reviewed. The collected data included demographic, clinical, laboratory and microbiological medical information. All patients were stratified into three risk groups according to PSI: low risk (PSI score I-II), moderate risk (III) and high risk (IV-V) groups. The examined treatment patterns were the appropriateness of admissions, category of antibiotics used. The prognostic factors associated with PSI and clinical outcomes were examined. Results: One hundred and six patients' medical data were reviewed. The overall appropriateness of admissions was low presenting many of patients were admitted or intensely treated in the hospital despite of lower risk of prognosis and treated with intravenous antibiotics instead of oral fluoroquinolones. Primary pneumonia pathogens were Klebsiella pneumoniae (27%) and Streptococcus pneumoniae (21.6%). Mean LOS was 8.5 days and was significantly longer (10.0days) (p<0.001) in high risk group. The patients with age >65 (p<0.001), diabetes mellitus (p<0.001), mental alteration (p<0.001), and/or $PaO_2$ <60 mmHg (p<0.001) had a tendency to have higher PSI. The prognostic factors associated with longer LOS were age >65 years (p=0.008), mental status alteration (p<0.001), dyspnea (p=0.002) and PSI score (p=0.001). The prognostic factors associated with mortality were congestive heart failure (p=0.038), systolic blood pressure <90 mmHg (p=0.002) and arterial pH <7.35 (p=0.013). Conclusion: Most of patients were found to over-utilize medical service according to appropriateness of admissions. The elderly, mentally altered patients with low $PaO_2$ had higher PSI score with increased risk of LOS. The mortality could be increased in the patient with disease state of congestive heart failure, high blood pressure, and/or acidosis.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.1-9
• /
• 2018

PURPOSES : In order to evaluate a crack resistance at cold joint, sealing tape was adopted to apply at cold joint instead of typical tack coat material(RSC-4). The sealing tape was made by hot sealing material. The crack resistance as function of environmental and traffic loading was measured with visual observation. METHODS : In this study, the crack resistance was evaluated as function of environmental and traffic loading. The freeze-thaw method was adopted for environmental loading of asphalt pavement. condition. The damage of cold joint under freeze-thaw action is initiated by ice expansion load and accelerated by the interfacial damage between new and old asphalt pavement. The traffic loading was applied with wheel tracking machine on the cold joint area of the asphalt pavement for 3 hours at $25^{\circ}C$. The evaluation of crack resistance was measured with visual observation. The freeze-thaw results shows that the sealing tape was significantly increased the crack resistance based on. RESULTS : To estimate the crack resistance at cold joint area due to the environmental loading, the Freeze-thaw test was conducted by exposing the product to freezing temperature(approximately $-18^{\circ}C$) for 24 hours, and then allowing it to thaw at $60^{\circ}C$ for 24 hours. The tack coat material(RSC-4) was debonded after 21 cycles of the Freeze-thaw test. The first crack was observed after 14 freeze-thaw cycle with RSC-4 material. But, the sealing tape was not debonded after 24 cycle test. Also, the sealing tape shows the better performance of the crack resistance under the traffic loading with wheel track test. The crack was generated the under traffic loading with RSC-4(tack coating), however, the crack was not shown with sealing tape. It indicates that the sealing tape has a strong resistance of tensile stress due to traffic loading. CONCLUSIONS :Based on limited laboratory test result, a performance of crack resistance using the sealing tape is better than that of general tack coat material(RSC-4). It means that the sealing tape is possible to extend a pavement service life because the crack, one of the main pavement distresses, will be delayed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.4
• /
• pp.57-66
• /
• 2013

Domestic PCB industry formed by orders of demand companies is extremely vulnerable in its innovation infrastructure including high value-added technology development and information exchange. The majority of PCB products produced in the country relies on the imports from abroad and it causes its vulnerability to external market changes. Due to the negative perceptions about the industry (e.g., 3D job), low treatment (especially SMEs) and expertise employment avoidance in PCB industry, the job market conditions of PCB industry is not so good. In these circumstances, the PCB industry is completely dependent on the demand market such as cellular phones, and tablet PC, and as a result the responsiveness of PCB industry to the changes in demand market is also vulnerable. In this PCB industry, Korean government is trying to build the research infrastructure for PCB industry that realizes the sharing of information among companiesthrough the operation of the PCB industry innovation forum (information innovation), builds SME suppot platform and supports quality improvement (technology innovation), and supports enterprise collaboration processes (material-process-equipment) utilizing PCM open laboratory. The PCB industry technology infratstructure project is going to be promoted by the government(1.3 billion won, each year) and the private investmen(434 million won each year) from 2013 to 2017(5 years project)(table 1). This study analyzes the feasibility of the project, by using the AHP analysis and the results shows that this project is considered feasible because the AHP overall score is evaluated as 0.841, the overall score is greater than or equal to 0.55.

• Journal of Science Education
• /
• v.38 no.1
• /
• pp.168-181
• /
• 2014

The purpose of this study was to monitor evaluation in science education at primary and secondary school in Korea. In order to do this, the survey was administered. The subject was 518 teachers; 292 elementary school teachers, 110 middle school science teachers and 116 general high school science teachers. It was found that the ratio of paper examination increased while that of performance evaluation decreased according to the grade of school. In the science paper examination, the ratio of selection type item was higher than that of supply type item, and the ratio of item belonging to knowledge area was higher than that of item belonging to the inquiry area regardless of the grade of school, teaching career, and teacher's gender. The teachers recognized the necessity of supply type item, but they suffered from the reliability of the result of that item. And it was hard for them to do performance evaluation because it took much time and effort. This study suggested that the high-quality in-service teacher training be provided and laboratory assistants who help the science experiment and grading test papers be employed in order to fulfil the performance evaluation and increase the ratio of supply type item and items belonging to the inquiry area.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.6
• /
• pp.43-54
• /
• 2018

The accurate estimation of reference crop evapotranspiration ($ET_o$) is essential in irrigation water management to assess the time-dependent status of crop water use and irrigation scheduling. The importance of $ET_o$ has resulted in many direct and indirect methods to approximate its value and include pan evaporation, meteorological-based estimations, lysimetry, soil moisture depletion, and soil water balance equations. Artificial neural networks (ANNs) have been intensively implemented for process-based hydrologic modeling due to their superior performance using nonlinear modeling, pattern recognition, and classification. This study adapted two well-known ANN algorithms, Backpropagation neural network (BPNN) and Generalized regression neural network (GRNN), to evaluate their capability to accurately predict $ET_o$ using daily meteorological data. All data were obtained from two automated weather stations (Chupungryeong and Jangsu) located in the Yeongdong-gun (2002-2017) and Jangsu-gun (1988-2017), respectively. Daily $ET_o$ was calculated using the Penman-Monteith equation as the benchmark method. These calculated values of $ET_o$ and corresponding meteorological data were separated into training, validation and test datasets. The performance of each ANN algorithm was evaluated against $ET_o$ calculated from the benchmark method and multiple linear regression (MLR) model. The overall results showed that the BPNN algorithm performed best followed by the MLR and GRNN in a statistical sense and this could contribute to provide valuable information to farmers, water managers and policy makers for effective agricultural water governance.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.191-202
• /
• 2010

In this study, the relationship between the settlements and the horizontal displacements according to embankment was analyzed at the marine sedimentary grounds for preparation of a site, and then the empirical equations of both the settlement and the horizontal displacement considering the embankment load and the thickness were proposed. To do this, the field and laboratory tests were performed at the improvement section where the pre-loading method was applied, and the field monitoring was performed using various sensors. Based on the results of the tests and monitoring, the ground deposits, soil characteristics and engineering properties were analyzed and the settlements and lateral movements were estimated by the Regression analysis. The ground deposits from the ground surface were composed of reclaimed soils, sedimentary soils and based rocks. The thickness of clay in the sedimentary soils layer was ranged from 3.9 m to 44.5 m. The embankment heights to improve the ground during pre-loading were constructed from 4.7 m to 7.8 m in each section. The settlements during embankment were ranged from 0.959 m to 2.217 m and the lateral movements were ranged from 0.048 m to 0.313 m. As the result of regression analysis, the equations of settlements and horizontal displacements according to embankments may be proposed as $s=0.02h^2+0.11h$ and ${\delta}=0.01e^{0.37h}$, respectively. The proposed empirical equations of the settlements and the horizontal displacements according to embankment on the marine sedimentary ground may be applied to the site where has a similar condition of study area.