• Journal of Nutrition and Health
• /
• 제54권4호
• /
• pp.342-354
• /
• 2021

Purpose: Obesity is a serious public health issue for the modern society and is considered a chronic health hazard. There are many surgical and pharmacological approaches to treat obesity. However, various potentially hazardous side effects remain the biggest challenge. Therefore, diets based on foods derived from natural products have gained increasing attention compared to anti-obesity drugs. Recently, research on edible insects as a food source has been a topic of considerable interest in the scientific communities. This study examined the anti-obesity effects of ingesting an edible insect by feeding a high-fat diet (HFD)-induced obese mouse models with a diet containing Tenebrio molitor larvae powder (TMLP). Methods: Six-week-old female C57BL/6J mice were divided into 4 groups according to treatment: 100% normal diet (ND), 100% HFD (HFD), HFD 99% + TMLP 1% (TMLP), and HFD 97% + TMLP 3% (TMLP 3%). TMLP was added to the HFD for 6 weeks for the latter two groups. Results: Compared to the HFD group, mice in the TMLP group showed weight loss, and micro-computed tomographic imaging revealed that the volume of the adipose tissue in the abdominal area also showed significant reduction. After an autopsy, the fat weight was found to be significantly reduced in the TMLP group compared to the HFD group. In addition, the degree of fat cell deposition in the liver tissue and the size of the adipocytes significantly decreased in the TMLP group. Reverse transcription polymerase chain reaction analysis for the mRNA expression of adipogenesis-related genes namely CCAAT-enhancer-binding proteins (C/EBP-β, C/EBP-δ), and fatty acid-binding protein 4 (FABP4) showed that the expression levels of these genes were significantly reduced in the TMLP group compared to the HFD group. Serum leptin level also decreased significantly in the TMLP group in the comparison with the HFD group. In addition, total cholesterol, triglyceride, and glucose levels in mouse serum also decreased in the TMLP group. Conclusion: Taken together, our results showed that TMLP effectively inhibited adipocyte growth and reduced body weight in obese mice.

• 한국전산구조공학회논문집
• /
• 제34권4호
• /
• pp.183-189
• /
• 2021

구조물에 장기적으로 발생하는 노후화를 정량적으로 파악하기 위해 상시진동 데이터를 활용한 일반화된 모니터링 시스템에 관한 연구가 세계적으로 활발히 수행중이다. 본 연구에서는 구조물에서 장기적으로 취득되는 동특성을 앙상블 학습에 활용하여 구조물의 이상을 감지하기 위한 보급형 엣지 컴퓨팅 시스템을 구축하였다. 시스템의 하드웨어는 라즈베리파이와 보급형 가속도계, 기울기센서, GPS RTK 모듈, 로라 모듈로 구성됐다. 실험실 규모의 구조물 모형 진동실험을 통해 동특성을 활용한 앙상블 학습의 구조물 이상감지를 검증하였으며, 실험을 기반으로 한 실시간 동특성 추출 분산처리 알고리즘을 라즈베리파이에 탑재하였다. 구축된 시스템을 하우징하고 포항시 행정복지센터에 설치하여 데이터를 취득함으로써 개발된 시스템의 현장 적용성을 검증하였다.

• 한국자원식물학회지
• /
• 제34권6호
• /
• pp.575-599
• /
• 2021

The edible roots of radish (Raphanus sativus L.) are consumed worldwide. For characterization and evaluation of the agronomic traits and health-promoting chemicals in radish germplasms, new germplasm breeding materials need to be identified. The objectives of this study were to evaluate the phenotypic traits and glucosinolate contents of radish roots from 110 germplasms, by analyzing correlations between 10 quantitative phenotypic traits and the individual and total contents of five glucosinolates. Phenotypic characterization was performed based on descriptors from the UPOV and IBPGR, and glucosinolate contents were analyzed using liquid chromatography-tandem mass spectrometry in multiple reaction monitoring mode (MRM). Regarding the phenotypic traits, a significant correlation between leaf length and root weight was observed. Glucoraphasatin was the main glucosinolate, accounting for an average of 71% of the total glucosinolates in the germplasms; moreover, its content was significantly correlated with that of glucoerucin, its precursor. Principal component analysis indicated that the 110 germplasms could be divided into five groups based on their glucosinolate contents. High levels of free-radical scavenging activity (DPPH) were observed in red radishes. These results shed light on the beneficial traits that could be targeted by breeders, and could also promote diet diversification by demonstrating the health benefits of various germplasms.

• Computers and Concrete
• /
• 제30권4호
• /
• pp.277-287
• /
• 2022

Due to the scarcity of extortionate experimental data, fatigue failure of the reinforced concrete (RC) element might be achieved economically adopting nonlinear finite element (FE) analysis as an alternative approach. However, conventional implicit dynamic analysis is expensive, quasi-static method overlooks interaction effects and inertia, direct cyclic analysis computes stabilized responses. Apart from this, explicit dynamic analysis may provide a numerical operating system for factual long-term responses. The study explores the fatigue behavior based on a simplified explicit dynamic solution employing nonlinear time domain analysis. Among fourteen RC beams, one beam is selected to validate under static loading, one under fatigue with the experimental study and other twelve to check the detail fatigue behavior. The SWOT (Strength, Weakness, Opportunities, Threats) analysis has been carried out to pinpoint the detail scenario in the adoption of numerical approach as an alternative to the experimental study. Excellent agreement of FE and experimental results is seen. The 3D nonlinear RC beam model at service fatigue limits is truthful to be used as an expedient contrivance to envisage the precise fatigue behavior. The simplified analysis approach for RC beam under fatigue offers savings in computation to predict responses providing acceptable accuracy rather than the complicated laboratory investigation. At higher frequency, the flexural failure occurs a bit earlier gradually compared to the repeated loading case of lower frequency. The deflection increases by 6%-10% at the end of first cycle for beams with increasing frequency of cyclic loading. However, at the end of fatigue loading, greater deflection occur earlier for higher load range because of more rapid stiffness degradation. For higher frequency, a slight boost in concrete compressive strains at an initial stage of loading has been seen indicating somewhat stepper increment. Stiffness degradation in larger loading cycle at same duration escalates the upsurge of the rate of strain in case of higher frequency.

• 산업경영시스템학회지
• /
• 제45권4호
• /
• pp.225-232
• /
• 2022

Recently, unmanned logistics delivery systems, such as UAV (Unmanned Aerial Vehicle, written as drone below) and autonomous robot delivery systems, have been implemented in many countries due to the rapid development of autonomous driving technology. The development of these new types of advanced unmanned logistics delivery systems is essential not only to become a leading logistics company but also to secure national competitiveness. In this paper, the application of the unmanned logistics delivery system was investigated in terms of market trends, overall technology level of last mile delivery drone and autonomous delivery robot. The direction of response to changes in the last mile delivery service market was checked through a comparison of the technological level between domestic companies that produce last mile devices and advanced foreign companies. As a result of this technology level analysis, the difference between domestic companies and advanced companies was shown using tables and figures to show their relative levels. The results of this analysis reflect the opinions of experts in the field of last-mile delivery technology. In addition, the technology level of unmanned logistics delivery systems for each country was analyzed based on the number of related technology patents. Lastly, insights for the technology level analysis of unmanned last mile delivery systems were proposed as a conclusion.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3080-3087
• /
• 2023

Thermoelectric (TE) materials working in radioisotope thermoelectric generators are irradiated by neutrons throughout its service; thus, investigating the neutron irradiation stability of TE devices is necessary. Herein, the influence of neutron irradiation with fluences of 4.56 × 10¹⁰ and 1 × 10¹³ n/cm² by pulsed neutron reactor on the electrical and thermal transport properties of n-type Bi₂Te_2.7Se_0.3 and p-type Bi_0.5Sb_1.5Te₃ thermoelectric alloys prepared by cold-pressing and molding is investigated. After neutron irradiation, the properties of thermoelectric materials fluctuate, which is related to the material type and irradiation fluence. Different from p-type thermoelectric materials, neutron irradiation has a positive effect on n-type Bi₂Te_2.7Se_0.3 materials. This result might be due to the increase of carrier mobility and the optimization of electrical conductivity. Afterward, the effects of p-type and n-type TE devices with different treatments on the output performance of TE devices are further discussed. The positive and negative effects caused by irradiation can cancel each other to a certain extent. For TE devices paired with p-type Bi_0.5Sb_1.5Te₃ and n-type Bi₂Te_2.7Se_0.3 thermoelectric legs, the generated power and conversion efficiency are stable after neutron irradiation.

• 대한이식학회지
• /
• 제31권4호
• /
• pp.170-176
• /
• 2017

We need to establish an informative guideline to increase inter-institutional and inter-observer reproducibility of renal transplant diagnosis, and to improve the diagnostic ability of pathologists in Korea. A first nation-wide survey for renal transplant pathology was conducted by Renal Pathology Study Group of the Korean Society of Pathologists in 2016, to provide the continued excellence in the transplantation pathology laboratory, and to improve the diagnostic ability for the best treatment of transplant patients. This survey revealed the significant variations in scale, work load and biopsy indications for the renal transplant pathology in various institutions in Korea. The Banff classification were used by all institutions for the diagnosis of renal transplant pathology, but different formats were used: most institutions (70%) used the "2013 Banff classification" while the others were using "2007 Banff classification" (20%) or even older formats. In daily diagnostic practice of the renal allografts, difficulties that pathologists encounter were quite diverse due to different environments they work in. Most respondents agreed that standardized diagnostic practice guidelines, regular education on renal transplant pathology and convenient ways of consultation are further needed. We are currently working toward the enhancement of the expertise of renal pathologists and to increase inter-institutional and inter-observer reproducibility by 1) development of a set of virtual slides of renal allograft biopsies for the training, 2) validation and gathering expert's consensus on the core variables of rejection diagnosis by using virtual slides, and 3) continued education by the developed virtual slide atlas.

• Journal of Preventive Medicine and Public Health
• /
• 제56권1호
• /
• pp.1-11
• /
• 2023

In 1945, atomic bombs were dropped on Hiroshima and Nagasaki. Approximately 70 000 Koreans are estimated to have been exposed to radiation from atomic bombs at that time. After Korea's Liberation Day, approximately 23 000 of these people returned to Korea. To investigate the long-term health and hereditary effects of atomic bomb exposure on the offspring, cohort studies have been conducted on atomic bomb survivors in Japan. This study is an ongoing cohort study to determine the health status of Korean atomic bomb survivors and investigate whether any health effects were inherited by their offspring. Atomic bomb survivors are defined by the Special Act On the Support for Korean Atomic Bomb Victims, and their offspring are identified by participating atomic bomb survivors. As of 2024, we plan to recruit 1500 atomic bomb survivors and their offspring, including 200 trios with more than 300 people. Questionnaires regarding socio-demographic factors, health behaviors, past medical history, laboratory tests, and pedigree information comprise the data collected to minimize survival bias. For the 200 trios, whole-genome analysis is planned to identify de novo mutations in atomic bomb survivors and to compare the prevalence of de novo mutations with trios in the general population. Active follow-up based on telephone surveys and passive follow-up with linkage to the Korean Red Cross, National Health Insurance Service, death registry, and Korea Central Cancer Registry data are ongoing. By combining pedigree information with the findings of trio-based whole-genome analysis, the results will elucidate the hereditary health effects of atomic bomb exposure.

• Composites Research
• /
• 제20권2호
• /
• pp.1-9
• /
• 2007

카본 에폭시로 제작된 복합재 압력용기의 노화 특성과 구조 사용 수명 평가를 위해 실내와 실외에서 10년과 15년간 자연노화 시켰다. 노화 특성의 통계적 분포를 구하기 위해 노화된 압력용기로부터 링 시편을 채취하여 수압 파괴 시험을 실시하였다. 그리고 섬유와 수지 계면의 노화 특성 확인을 위해 시험 파편 계면을 SEM을 이용하여 관찰하였다. 섬유 인장 파손 변형률의 와이블 파라미터 값 기준으로 실내에서 10년, 15년 노화되었을 경우 각각 19%와 23% 저하되었으나, 실내와 실외의 노화 특성 차이는 크지 않았다. 그러나 압력용기 외면에 적용한 표면 페인트는 노화 방지에 큰 효과를 나타내었다.

• 대한통합의학회지
• /
• 제11권1호
• /
• pp.1-12
• /
• 2023

Purpose : This study examined the relationship between oral health management behavior and subjective health perception by using a tool that measures health-related quality of life named EQ-5D. The findings are expected to provide fundamental data for developing diverse programs, including health- and oral-health-related educational media, to ultimately enhance people's health-related quality of life. Methods : Adults over the age of 20 were extracted from the raw materials of the 8th national health and nutrition examination survey conducted in 2019. Among them, 4034 were finally chosen as the study subjects after checking the response distribution of relevant questions and excluding inadequate samples. Variables included general characteristics, health management behavior, oral health management behavior, subjective health perception, and EQ-5D level. Cross-tabulation test, independent t-test, one-way analysis of variance, and linear regression analysis were conducted using SPSS 25.0. Results : EQ-5D, which measures the level of health-related quality of life, was high when the subjects had a medical check-up experience, no experience of unsatisfactory medical service, and did not get an influenza vaccination (p<.001). The quality of life was higher when the subjects received dental inspections, did not require treatment, and used oral care goods (p<.005). Health-related quality of life was also higher when the subjective health level and subjective oral health level were high. Conclusion : Results indicate that subjective health, oral health perception level, and quality of life together were high when people had a regular check-up, did not neglect treatment, and used oral care goods. Considering the findings of this study, check-up programs that are customized for each age group are necessary. Health-related quality of life could be enhanced through the provision of diverse medical services and active efforts to prevent any medical blind spot.