• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.34-41
• /
• 2019

Objective: This study is conducted to evaluate airborne lead concentration in and around lead production plant. Methods: Airborne lead concentration was monitored simultaneously inside of the processes of lead recycling factory and outside of factory which include stack, boundary of factory and residential area 1 km and 7.5 km from factory, respectively. All samples were measured three times at 1.5 m from the ground and analyzed using inductively coupled plasma mass spectrometer, inductively coupled plasma optical emission spectrometer or flame atomic absorption spectrometer. Results: All airborne lead concentrations measured inside of factory($13.9{\mu}g/m^3-252.9{\mu}g/m^3$) and outside of factory($0.001{\mu}g/m^3-54.97{\mu}g/m^3$) showed log-normal distribution. Geometric mean lead concentration, $54.81{\mu}g/m^3$, measured inside of factory was significantly higher than outside of factory, $0.20{\mu}g/m^3$(p<0.01). Among the samples measured inside the factory, lead concentration was the highest in the refining process($59.02{\mu}g/m^3-252.9{\mu}g/m^3$). In the case of the samples outside the factory, the nearest chimney was the highest($3.84{\mu}g/m^3-54.97{\mu}g/m^3$), and the lead concentration at the farthest place, 7.5 km from the factory was the lowest($0.001{\mu}g/m^3-1.7{\mu}g/m^3$). The arithmetic lead concentration, $0.45{\mu}g/m^3$ in the residential area near the factory was below the atmospheric environment standard of $0.5{\mu}g/m^3$, but the maximum concentration of $3.4{\mu}g/m^3$ was exceeded. Conclusions: Airborne lead concentration in residential area, 1 km away from lead recycling plant, may exceed ambient air standard of $0.5{\mu}g/m^3$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.831-840
• /
• 2013

In this paper, we analyze the telecom services and their socio-economic value for sharing spectrum, which is suitable to access. For this, we suggest a concept and a classification model of sharing spectrum and make a survey for analyzing the socio-economic value of spectrum, 910 MHz which is candidated for sharing between 1.4~4.5 GHz in Korea. Also, we propose mobile telecom service, WiFi, ASA, public service, M2M, and smart home and factory service as service for suitable to sharing spectrum.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.40-45
• /
• 2019

The smart factory has developed with the help of several technologies such as automation, artificial intelligence, big data, smart sensors and communication protocols. The Internet of things(IOT) among communication protocols has become the key factor for the seamless integration of various manufacturing equipment. Therefore, it is important that the IOT cooperate with the standards of communication protocols proposed by the SEMI in the semiconductor industry. In this paper, we suggest a novel reference model of the communication protocols for semiconductor equipment by introducing an IOT service layer. With the IOT service layer, we can use the functions and the additional services provided by the IOT standards that give the inter-operability between factory machines and host computers. We implement the standard of the communication protocols for semiconductor equipment with the IOT service layer by using ns3 simulator. It concludes that it is necessary to provide the platform for the IOT service layer to deploy efficiently the proposed reference model of the communication protocols.

• Information Systems Review
• /
• v.25 no.3
• /
• pp.199-220
• /
• 2023

Projects to deploy and diffuse smart factories in South Korea are aimed at enhancing national manufacturing competitiveness. However, a significant portion of deployed companies remain at the basic stage and struggle to utilize smart factories regularly. Existing studies have primarily focused on the technical aspects of smart factories, using data analytics and case studies, leading to a gap in empirical research on continuous use and upgrade intentions. This study identifies key factors influencing smart factory usage and user satisfaction, drawing on the Information Systems Success Model (ISSM) and previous research. It empirically examines the impact of these factors on continuous use intention, management performance, and advancement acceptance intention through smart factory usage and user satisfaction. A structural equation model is employed to validate the research hypotheses, using survey data from 287 small and medium-sized manufacturing enterprises (SMEs) that have adopted smart factories. Results demonstrate that system quality, information quality, service quality, and government support significantly affect smart factory usage, while service quality and government support influence user satisfaction. Furthermore, smart factory usage and user satisfaction have positive effects on management performance, continuous use intention, and subsequently advancement acceptance intention. This study provides novel insights by demonstrating the specific impact mechanisms of smart factory user satisfaction on the business and the intentions of manufacturing SMEs regarding continuous use and advancement acceptance, leveraging the ISSM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2167-2175
• /
• 2017

In recent years, an IoT is dramatically developing according to the enhancement of AI, the increase of connected devices, and the high-performance cloud systems. Huge data produced by many devices and sensors is expanding the scope of services, such as an intelligent diagnostics, a recommendation service, as well as a smart monitoring service. The studies of edge computing are limited as a role of small server system with high quality HW resources. However, there are specialized requirements in a smart factory domain needed edge computing. The edges are needed to pre-process containing tiny filtering, pre-formatting, as well as merging of group contexts and manage the regional rules. So, in this paper, we extract the features and requirements in a scope of efficiency and robustness. Our edge offers to decrease a network resource consumption and update rules and learning models. Moreover, we propose architecture of edge computing based on learning factors sharing with a cloud system in a smart factory.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.146-153
• /
• 2023

In accordance with the industrial convergence regulation sandbox decision promoted by the Ministry of Trade, Industry and Energy, the "machine tool sharing service in the factory" applied for by MyMaker Co., Ltd., an industry-academia cooperation company, was granted a demonstration exception. While implementing this, in a situation where the ordering service part had to be developed as software, the company's domain problems were identified and analyzed, procedures were established, and a system was designed that met the related requirements. As a joint research and development project to solve the difficulties of the LINC+ industry, the order-to-order system was finally developed for shared factory services. In accordance with the procedure and requirements analysis, the planning, design, prototyping, and implementation production stages were carried out. Finally, it was confirmed that the final development contents were well implemented according to the requirements, and the resolution of the difficulties was confirmed through functional verification demonstrations.

• Journal of the Korean Dietetic Association
• /
• v.7 no.4
• /
• pp.397-409
• /
• 2001

The purposes of this study were to identify customer expectation, perception and satisfaction of foodservice quality to analyze the influencing factors on foodservice quality and finally to provide basic information for the improvement of foodservice quality. A survey of 4 factory foodservices was undertaken and detailed information was collected from 675 respondents. Statistical data analysis was completed using the SPSS package program for descriptive analysis, t-test and one-way ANOVA. Male had higher scores than female in perceptions of foods and services, and the differences were statistically significant. As analysis of expectation, perception and satisfaction result of age, expectation and perception were statistically significant, and mostly expectation and perception increased according as age increased. Expectation and perception showed statistical differences by marital status. Married people had higher scores in expectation and perception of food and service than single. According to family type, respondents living alone showed lower scores in expectation and perception of food and service than those living with family or relatives. Conversely, living alone had high expectation on service. As analysis of work type, office workers showed higher scores of service expectation, food and service perception than production workers. As education level increased, food and service expectation and perception increased mostly. As analysis of work post, food and service expectation and perception increased as work post raised. Meanwhile, married people had higher scores in service quality of satisfaction than single. Result of the study can be summarized as follows the analysis of expectation, perception and satisfaction of foodservice quality, the Quadrant of food and service quality expectation and perception according to demographic variables. Expectation, perception and satisfaction scores of foodservice attributes according to work type. The distribution of attributes with satisfyingly significant difference in grid.

• Journal of the Korean Home Economics Association
• /
• v.28 no.1
• /
• pp.125-140
• /
• 1990

The purpose of this study is to inverstigate the need of child care services and child care programs for the working class mothers. We surveyed four Industrial complex (in Seoul, Incheon, Pusan, Ulsan) to collect data. The samples were 282 mothers (Seoul: 95, Incheon: 54, Ulsan: 62, Pusan: 71). The mothers had children under six years of age and they worked at factory for 11 hours. They (65%) rented houses with 1-2 rooms. Their income was not enought to support their family. They were never supported by social network, so they had to work at factory and they need child care services. The mothers had many difficulties of child rearing and early childhood education. They wanted perfect day care programs. They expected it as followings: (1) Day care center placed at factory or near home. (2) The administrater is goverment or employer. (3) It is managed a full time system. (4) It is center-based day care or industrical day care. (5) They share day care expense with employer or goverment. (6) Day care expenses is 35,000 won in case of full time system, 25,000 won in case of half-time system. They desited highly qualifed day care programs, but they would not expense highly cost. So we suggest that goverment and factory employers support the working mothers.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.2 s.10
• /
• pp.87-98
• /
• 2002

Korea government is making an effort to improve the efficiency in construction industry by introducing CITIS (Contractor integrated Technical Information Service). In order to provide a base for the application of CITIS into the construction industry, this research provides a concept of virtual factory which should be incorporated into CITIS system for the successful collaborative work in the virtual space. It then implements a prototype system through process and data modeling to apply into the road construction projects. The prototype system is tested to verify its efficiency. Finally, lesson learned from these works is provided to advance the current CITIS toward a collaborative virtual factory.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.55-78
• /
• 2006

In spite of the development of the service industry, research on measuring customers' service satisfaction is far insufficient. Therefore, ways to measure the service quality accurately need to be established due to the ambiguous types of service business. This research classifies the types of service business into service factory, service shop, mass service, professional service by using Schmenner's Service Process Matrix and conducts research on domestic literature that measured service satisfaction with Servqual and ServPerf. This study intends to suggest guidelines to measure customer satisfaction according to types of service business by researching ways to measure service satisfaction according to the types of service business and analysing the actual application methods based on a table that summarizes previous research on Servqual and Servperf.