• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.25-26
• /
• 2006

The method measuring the absolute position of a point diffraction source emitting a spherical wavefront in three-dimension is proposed. Two-dimensional interference of spherical wavefronts is used to overcome ambiguity of phase order. The spherical wavefront is explicated by Taylor series expansion, from which a radius of curvature of a spherical wavefront and its center position in three-dimension are obtainable. The spherical wavefront is reconstructed by a modified lateral shearing interferometer, which uses single-mode fiber as a point diffraction source.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.2
• /
• pp.133-144
• /
• 1996

To get accurate results, the realistic stress-strain relationships of soils are dependent on a number of factors such as soil types, density, stress levels and stress path. Such attempts are continuously being made by the developement of analytical models for soils incorporating all such factors. Isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress path for Baekma river sand were performed to investigate parameters characteristics of Lade's single work hardening model dependant on the stress path. Using the computer program based on the regression analysis, the values of parameters for the model were determined. In conclusion, the parameters of Lade's model are little influenced by the stress paths. Though yield criterion parameters ( h, ${\alpha}$a) are much influenced by stress level and stress path, the parameters don't have influence on stress-strain behavior.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.6
• /
• pp.12-19
• /
• 2003

This paper presents the effect of boundary conditions in various failure pressure models published for the estimation of failure pressure. Furthermore, this approach is extended to the failure prediction with the aid of a failure probability model. The first order Taylor series expansion of the limit state function is used in order to estimate the probability of failure associated with each corrosion defect in buried pipelines for long exposure period with unit of years. A failure probability model based on the von-Mises failure criterion is adapted. The log-normal and standard normal probability functions for varying random variables are adapted. The effects of random variables such as defect depth, pipe diameter, defect length, fluid pressure, corrosion rate, material yield stress, material ultimate tensile strength and pipe thickness on the failure probability of the buried pipelines are systematically investigated for the corrosion pipeline by using an adapted failure probability model and varying failure pressure model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3216-3230
• /
• 2015

A hot-issued research topic in the workflow intelligence arena is the emerging topic of "workflow-supported organizational social networks." These specialized social networks have been proposed to primarily represent the process-driven work-sharing and work-collaborating relationships among the workflow-performers fulfilling a series of workflow-related operations in a workflow-supported organization. We can discover those organizational social networks, and visualize its analysis results as organizational knowledge. In this paper, we are particularly interested in how to visualize the degrees of closeness centralities among workflow-performers by proposing a graphical representation schema based on the Graph Markup Language, which is named to ccWSSN-GraphML. Additionally, we expatiate on the functional expansion of the closeness centralization formulas so as for the visualization framework to handle a group of workflow procedures (or a workflow package) with organizational workflow-performers.

• The Journal of the Korean dental association
• /
• v.16 no.3 s.106
• /
• pp.235-237
• /
• 1978

Dr. Walter Wright first presented the results of his studies on acrylic resins in July, 1937. The use of resins for adaptation in inlay and crown and bridge prosthesis was first reported in June 1940 by Harris. There has been now and acceptable list of several physical and mechanical properties of acrylic resins which have been studied to a considerable extent by various researchers, or determined from clinical experience. They include; pleasant esthetics, taste, odor, cleanliness, compatibility with oral tissue, dimensional stability, water sorption by imbibition, hardness, ease and success of repair, weight, thermal coefficient of expansion and strength to resist functional stress. The author carried a series of experiments forward to check the strength. Specimens which were cured at boiling temperature showed weaker strength than those ones which were cured at 72℃.

• Journal of Power System Engineering
• /
• v.12 no.1
• /
• pp.72-79
• /
• 2008

This paper designs a looper-tension controller for mass-flow stabilization in hot strip finishing mills. By Newton's 2nd law and Hooke's law, nonlinear dynamic equations on the looper-tension system are firstly derived, and linearized by a linearization algorithm using a Taylor's series expansion. Moreover, a tension calculation model is obtained from the nonlinear dynamic equations which is called as a soft sensor of strip tension between two neighboring stands. Next, a looper-tension servo controller is designed by an ILQ(Inverse Linear Quadratic optimal control) algorithm, and it is combined with a minimal disturbance observer which to attenuate speed disturbances by AGC and operator interventions, etc.. Finally, it is shown from by a computer simulation that the proposed ILQ controller with a disturbance observer is very effective in stabilizing the strip mass-flow under some disturbances, moreover it has a good command following performance.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.124-126
• /
• 1997

A number of electromagnetic devices periodically driven by solid-state switches have been analyzed with time-stepping finite element method, which requires much time to reach a steady state. The sensitivity analysis which have been used for the shape design is employed for an efficient calculation of linear magnetodynamics with nonsinusoidal driving sources. The high-order frequency sensitivity from the harmonic finite element formulation is used along with Fourier transform and Taylor series expansion. The algorithm is validated through a numerical example of a single-phase transformer driven by a trapezoidal voltage source.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.1 s.52
• /
• pp.87-92
• /
• 2006

This study was done to investigate the protective effect of novel 9-amino-1, 2, 3, 4-tetrahydroacridine derivatives on the hepatoprotective effect intoxicated rats induced by carbon tetrachloride ($CCl_4$). A series of currently derivatives of 9-amino-1, 2, 3, 4-tetrahydroacridine have been prepared through the alkly substitution or the ring expansion for the treatment of the Alzheimer's disease. The activities of aminotransferase (aspartate and alanine) and contents of alkaline phosphatase, triglyceride and glutathione S-transferase in 9-amino-1, 2, 3, 4-tetrahydroacridine derivatives pretreated rats were significantly decreased compared to the only carbon tetrachloride treated rats but the contents of cholesterol were increased compared to the only $CCl_4$ treated rats. The result indicated that 9-amino-1, 2, 3, 4-tetrahydroacridine derivatives showed hepatoprotective effect in $CCl_4$ treated rats.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.4
• /
• pp.90-100
• /
• 1996

To maintain high spacial accuracy and rapid CPU time in interpolating data from grid to random position or inversely in PIV, proposed many technuques are compared and discussed mainly in terms of interpolating error and computing time. And artificial PIV atmosphere data is furnished by CFD result. First, for interpolation from grid to random position, multiquadric method gives the highest accuracy with the longest CPU time and Taylor series expansion methods give reasonable accuracy with less calculating load. Secondly, the sub-pixel resolution analysis in estimating the coordinates of the maximum correlation coefficients essential in the grey level correlation PIV reveal that 8-neighbours 2nd-order least square interpolation gives utmost accuracy in terms of the real flow conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.4
• /
• pp.412-412
• /
• 1996

To maintain high spacial accuracy and rapid CPU time in interpolating data from grid to random position or inversely in PIV, proposed many technuques are compared and discussed mainly in terms of interpolating error and computing time. And artificial PIV atmosphere data is furnished by CFD result. First, for interpolation from grid to random position, multiquadric method gives the highest accuracy with the longest CPU time and Taylor series expansion methods give reasonable accuracy with less calculating load. Secondly, the sub-pixel resolution analysis in estimating the coordinates of the maximum correlation coefficients essential in the grey level correlation PIV reveal that 8-neighbours 2nd-order least square interpolation gives utmost accuracy in terms of the real flow conditions.