• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.91-93
• /
• 2008

전기로 인한 화재의 주요원인 중 하나는 전기회로에서 발생되는 아크이며, 기존 사용되고 있는 보호장치인 휴즈나 배선용 차단기가 제공하는 과부하, 누전, 단락뿐만 아니라 아크현상에 대한 보호기능을 갖춘 통합 전기화재 감시 및 보호장치의 필요성과 이에 대한 효율적인 운용시스템이 요구된다. 이처럼 다양한 전기화재 사고 중에서 주요 사고 사례 중의 하나가 선로 혹은 전선의 절열 파괴로 일어나는 직렬아크, 스파크(series arc, spark) 현상(누전차단기 혹은 과전류차단기가 동작하지 않는 범위의 아크사고 모의)이다. 이러한 사고를 모의하기 위한 아크발생장치를 설계하여 UL-1699에서 규정하는 아크의 발생여부를 확인할 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.4
• /
• pp.357-372
• /
• 2016

Augustine volcano, located along the Aleutian Arc, is one of the most active volcanoes in Alaska and nearby islands, with seven eruptions occurring between 1812 and 2006. This study monitored the surface displacement before and after the most recent 2006 eruption. For analysis, we conducted a time-series analysis on data observed at the permanent GPS(Global Positioning System) observation stations in Augustine Island between 2005 and 2011. According to the surface displacement analysis results based on GPS data, the movement of the surface inflation at the average speed of 2.3 cm/year three months prior to the eruption has been clearly observed, with the post-eruption surface deflation at the speed of 1.6 cm/year. To compare surface displacements measurement by GPS observation, ENVISAT(Environmental satellite) radar satellite data were collected between 2003 and 2010 and processed the SBAS(Small Baseline Subset) method, one of the time-series analysis techniques using multiple InSAR(Interferometric Synthetic Aperture Radar) data sets. This result represents 0.97 correlation value between GPS and InSAR time-series surface displacements. This research has been completed precise surface deformation using GPS and time-series InSAR methods for a detection of precursor symptom on Augustine volcano.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.1
• /
• pp.67-87
• /
• 2010

This article deal with petrotectonic setting and petrogenesis from petrography and chemical analyses of the Cretaceous volcanic and intrusive rocks in the Cheolwon basin. The volcanic rocks are composed of basalts in Gungpyeong Formation, Geumhaksan Andesite, and rhyolitic rocks (Dongmakgol Tuff, Rhyolite and Jijangbong Tuff), and intrusive rocks, Bojangsan Andesite, granite porphyry and dikes. According to petrochemistry, these rocks represent medium-K to high-K basalt, andesite and rhyolite series that belong to calc-alkaline series, and generally show linear compositional variations of major and trace elements with increase in $SiO_2$ contents, on many Harker diagrams. The incompatible and rare earth elements are characterized by high enrichments than MORB, and gradually high LREE/HREE fractionation and sharp Eu negative anomaly with late strata, on spider diagram and REE pattern. Some trace elements exhibit a continental arc of various volcanic arcs or orogenic suites among destructive plate margins on tectonic discriminant diagrams. These petrochemical data suggest that the basalts may have originated from basaltic calc-alkaline magma of continental arc that produced from a partial melt of upper mantle by supplying some aqueous fluids from a oceanic crust slab under the subduction environment. The andesites and rhyolites may have been evolved from the basaltic magma with fractional crystallization with contamination of some crustal materials. Each volcanic rock may have been respectively erupted from the chamber that differentiated magmas rose sequentially into shallower levels equivalenced at their densities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.112-118
• /
• 2012

Steel industry produces many by-products and wastes such as blast furnace slag, electric arc furnace slag, and converter slag. As in the case of rock, the main component of steel slag are CaO and $SiO_2$ ; further, steel slag is as alkaline as portland cement or concrete. Electric arc furnace oxidizing slag is possible to use as an aggregate for concrete ; however, it has been reclaimed because of it's expansibility caused by free CaO. Recently, a innovative rapid cooling method for melting steel slag has been developed in Korea, which reduces free lime content to minimum level and increases the stability of iron oxide. Therefore, this study describes the results of a series of research to utilize globular shape of electric arc furnace oxidizing slag fine aggregates made by rapidly cooled method for the construction industry by cooling rapidly melted slag from the steel industry. First of all, an experiment was carried out to investigate the quality characteristics of rapidly cooled electric arc furnace oxidizing slag fine aggregates in order to determine whether they can be applied to the construction industry. Then, by applying them to concrete of various particle sizes, we explored experimentally the desired condition to apply rapidly cooled electric arc furnace oxidizing slag fine aggregates to concrete.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.3
• /
• pp.121-138
• /
• 2018

We have examined the petrotectonic setting and magmatic evolution from petrochemical characteristics of major and trace elements for the Cretaceous volcanic rocks in and around the Mireukdo Island. The volcanic rocks, can be devided into Jusasan, Unmunsa, Yokji and Saryang subgroups on the ascending order, are classified as basalt, basaltic andesite, andesite, dacite and rhyolite on TAS diagram. Petrochemical data show that the rocks are calc-alkaline series, and suggest that erupted earlier medium-K series and later high-K series. The volcanic rocks provide a case in which the calc-alkaline magma are formed, not only from separate protoliths, but following separate paths from source to surface. Earlier and later subgroups take different paths to the surface respectively, and are emplaced in the shallow crust as a series of discrete magma chambers through the volcanic processes. After emplacement, each chamber evolves indepently through fractional crystallization with a little assimilation of wall rock. The volcanic rocks have close petrotectonic affinities with orogenic suite and subduction-related volcanic arc. The rhyolitic magma can be derived from calc-alkaline andesitic magma by fractional crystallization with crustal assimilation, which may be derived from a partial melt of peridotite in the upper mantle.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.232-238
• /
• 2009

Flicker, also known as voltage fluctuation, is a newest problem of power quality issues, because it is caused by nonlinear loads such as electrical arc furnace and large-scale induction motor, which are country-widely used as the heavy industries of a country develop. An international standard, International Electrotechnical Commission (IEC) 61000-4-15, was published in 1997 and revised in 2003. With increasing concerns about flicker, its mitigation methods have been also studied. General countermeasures for flicker are divided into three categories: a) enhancing the capacity of supplying system, b) Series elements including series reactor and series capacitor and c) power electronic devices including static VAR compensator (SVC) and static synchronous compensator (STATCOM). This paper introduces how to mitigate the voltage flicker at the point of common coupling (PCC) and presents how to simulate and compare the flicker alleviating effects by each mitigation method, using IEC flickermeter based on the Matlab/Simulink program.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.234-235
• /
• 2006

In this study, we experimented deterioration characteristics of PVC insulation wires for electrical apparatus by series arcing and analyzed the heat generation at the contacts of wires, glowing/growing process of copper oxide, waveforms of contact voltage, current, power dissipation, and so on. We found out that how glowing contacts and surface arcing can decompose PVC insulation and that subsequent series arc can lead to ignition. We expect that these results are useful for improving fire protection technology by providing a better understanding of how electrical fires can initiate.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.153-161
• /
• 2008

Agriculture and forest are basis for livelihood in Nepal while both sectors constitute around 40 percent of the national product and over two-thirds of the economically active population is dependent on agriculture. However, radical changes in land use, depletion in crops production and food availability are major threats due to loss of soil fertilityand severe environmental degradation. In this study, we used time series data from 1986/87 to 2005/06 about food crop production and population published by Government of Nepal, Ministry of Agriculture and Cooperatives and Central Bureau of Statistics. Descriptive statistics and ArcGIS were used to assess and map the food security status of Nepalese Terai based on the local food demand and supply system. Food supply to demand ratio(FSDR) was the main idea of assessment. Our results showed that out of 20 districts, only 8 districts were categorised under secured food districts whereas 5 districts were still under food unsecured situation. The analysis further revealed that 7 districts had faced food deficit more than 8-16 times during the last 20 year periods. Data further showed that there was surplus food supply relative to the requirements dictated by FSDR. However, the average FSDR was less than 1.2(less than 20% surplus) exploring fact that most of the districts were not producing sufficient food to cope up the food shock and after 1995 it was relatively stagnant. Our prediction reveals that food supply in Terai even in the future would remain at almost the same level as now, and there will not more than 16-17% surplus by 2021 considering medium vibrant population growth. The findings thus, indicate that Terai may not be a food secure region in the future, even though the region is considered as a food storage house of Nepal. In addition, this paper suggests ways to make future comprehensive case studies more widely comparable in Terai, Nepal.

• Korean Journal of Environmental Biology
• /
• v.21 no.3
• /
• pp.223-233
• /
• 2003

This paper introduces a study on the development of environment assessment technique and biodiversity management system for stream ecosystems and their application to Korean streams. Based on comprehensive field investigations from a series of streams of Bukhangang (North Han River) system as well as on long-term field survey and bibliographic data from streams throughout South Korea, schemes for environmental and biodiversity research of stream ecosystems aye reviewed; types of major environmental damages in Korean streams are classified; a rapid assessment technique for nature quality of stream ecosystems is presented; and a list of environmental and biotic factors for the use of GIS-based biodiversity management system in stream ecosystems is provided. The biodiveysity management system, which is based on ArcView and GEUS programs, is applied to Gapyeong Creek, a typical mid-size stream in Korea.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.57-63
• /
• 2004

Fracture toughness is an important parameter in designing offshore structures to ensure resistance to fracture at various temperatures. In this study, a series of experiments is carried out to obtain fracture toughness values (CTOD) of API 2W Gr.50B, welded using FCAW(Flux Cored Arc Weld). In particular, a comparison of absorbed impact energy and CTOD values are made with respect to two different welding groove shapes; double-V-groove and double-bevel-groove. Charpy impact tests are performed for specimens sampled near the root gap, and CTOD tests are carried out for three point bending specimens having the notch at weld zone. While Charpy impact test result is determined to be a good qualitative measure of fracture toughness, no quantitative correspondence between impact absorbed energy and CTOD values was found. Based on the experiment, it is observed that double-V-groove welds give lower transition temperature than those of double-bevel-groove.