• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2240-2242
• /
• 2002

This paper show serial communication method in order to design how to interface between fault tolerant systems with redundancy. Problem has been in the method that fault tolerant system had switched of serial data with common switching device. This problem degrade reliability in itself and total system which is interfaced with that serial communication system. So Arbitration module of serial communication which is suggested in this paper can improve the reliability using voter algorithm which fault is detected passively.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.35-40
• /
• 2023

In this paper, a serial wireless LAN virtual communication module that allows microprocessors to communicate wirelessly with other peripheral devices is developed as part of a study to build an online virtual experiment system that allows them to practice virtually anytime, anywhere in microprocessor application education in electrical and electronic control engineering. The developed module is connected to the microprocessor in the virtual experiment system through serial interface. The serial data is sent to and received from peripheral devices through the wireless LAN interface of the host computer where the virtual experiment software is being performed. In order to verify the function of the developed serial wireless LAN virtual communication module, experiments were conducted in which a microprocessor in the virtual experiment system exchanged data with an Android smartphone through a wireless LAN interface of a host computer. The developed serial wireless LAN communication module is expected to enable virtual microprocessors to communicate with surrounding real devices through wireless LAN, which can be efficiently used in microprocessor application education.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.45-52
• /
• 2002

This paper presents fault detection scheme of Brushless DC(BLDC) motor drive system by estimating BLDC motor resistance using motor input and output data which is transmitted from data acquisition board to host computer over serial communication channel. Since communication time delay has a serious effect on performance, we use periodic and fixed communication protocol. Hence, the delay time is priory known. Simplified BLDC motor model and recursive least square algorithm is used for estimating motor resistance. By experiment result, we confirm the proposed scheme.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.27-30
• /
• 2017

IoT could be applied to various areas because of the important role of sensor. The existing sensor communication method is to quickly transmit data by using clock and two data pins based on the I2C serial communication method. As the objects used are gradually light-weighted and the amount of data transmission is decreased, the simplification of hardware is more emphasized as an essential design element than the speed of transmission. This paper designed a circuit to send/receive data in series, and also realized arduino, by analyzing the existing communication method and then using a single pin for light-weight. The single pin serial communication could reduce power consumption, which is suitable for the sensor area using digital communication of IoT area.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.6
• /
• pp.21-27
• /
• 2015

We analyze the problem that is occurring when using parity mode transformation required for 9 bit serial communication under Linux environment and propose the solution. The parity mode change is used for 9 bit serial communication in the Linux that by nature supports only 8 bit serial communication. delay (around OS tick) arises. Our analysis shows that the cause is minimum length of waiting time to transmit data remained in Tx FIFO buffers. A modified Linux serial driver proposed in this paper decreases the delay less than 1ms by using accurate time delaying. Despite various system communication interfaces, enormous existing standards and system have adopted RS-232 serial communication, and the part of them have communicated by 9bit serial.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1013_1014
• /
• 2009

In this paper, the electrical interfaces used in between COMS satellite bus and Ka-band communication payload are analyzed to verify the robustness of data bus. The purpose of the serial data bus of satellite is to allow serial data transfer between one bus controller or source equipment to several user terminals or slave equipments. A serial data bus in COMS satellite is mainly used for Channel Amplifier and Digital Control Unit of Ka-band Payload.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.533-541
• /
• 2011

The redundant operation of a parallel AC to DC converter via a serial communication bus is presented. The proposed system consists of three isolated CUK power factor correction modules. The controller for each converter is a dsPIC30F6010 microcontroller while a RS485 communication bus and the clock signal are used for synchronizing the data communication. The control strategy of the redundant operation relies on the communication of information among each of the modules, which communicate via a RS485 serial bus. This information is received from the communication checks of the converter module connected to the system to share the load current. Performance evaluations were conducted through experimentation on a three-module parallel-connected prototype, with a 578W load and a -48V dc output voltage. The proposed system has achieved the following: the current sharing is quite good, both the transient response and the steady state. The converter modules can perform the current sharing immediately, when a fault is found in another converter module. In addition, the transient response occurs in the system, and the output voltages are at their minimum overshoot and undershoot. Finally, the proposed system has a relatively simple implementation for the redundant operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2684-2690
• /
• 2009

The existing mobile learning service is the method that provides data packets in real time. It has some problems of much data packet cost and delay to provide the mobile learning service. In this paper, to solve the problems, we suggest to implementation of the mobile learning system of the new method using serial communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2009

OFDM is used for achieving a high-speed data transmission in mobile wireless communication systems. Conventionally, fast Fourier transform that is the main signal processing of OFDM is implemented using digital signal processing. The DSP FFT LSI requires large power consumption. Current-mode FFT LSI with analog signal processing is one of the best solutions for high speed and low power consumption. However, for the operation of current-mode FFT LSI that has the structure of parallel-input and parallel-output, current-mode serial-to-parallel and parallel-to-serial converter are indispensable. We propose a novel current-mode SPC and PSC and full chip simulation results agree with experimental data. The proposed current-mode SPC and PSC promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.