• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.123-129
• /
• 2016

In this paper, results of produced PCU(Power Control Unit) prototype was showed by suggesting and maintaining optimal operation status which let the three functional modules automatically operate with its necessity by prioritizing operation process. In order to validate effectiveness of the suggested method, we produced a test PCU and examined the results. PCU consists of S3R(Sequential Switching Shunt Regulator), BCR(Battery Charge Regulator), and BDR(Battery Discharge Regulator): converting photovoltaic power into constant voltage at linked bus voltage; storing dump power in the battery which is an auxiliary energy storage device; and supplying power charged in battery to the load. To maintain its high reliability and optimal condition of these three power conversion modules, each module operates in parallel and stable bus voltage is required to be retained at all-time due to the nature of power supply for satellite.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.2
• /
• pp.10-21
• /
• 1998

In this paper, we analyze the problems of conventional and previous mehtod on delay test method in IEEE 1149.1. To solve them, we propose two kinds of delay test architectures. One is called ARCH-C, is for combinatonal circuit, and the other is ARCH-S, for clocked sequential circuit. ARCH-C is able to detect delay defect of 0.5 $T_{tck}$ or 1 $T_{tck}$ size. And ARCH-C have a fixed and small amount of hardware overhead, on the contrary preious method has a hardware overhead on the dependent of CUT. This paper discusses weveral problems of Delay test on IEEE 1149.1 for clocked sequential circuit. We suggest the method called ARCH-S, is based on a clock counting technique to generate continuous clocked input of CUT. the simulation results ascertain the accurate operation and effectiveness of the proposed architectures.res.

• Journal of Korean Society for Quality Management
• /
• v.11 no.2
• /
• pp.2-9
• /
• 1983

As will be seen, this paper is tries that the research on the mathematical structure of Markov process and Markovian sequential decision process (the policy improvement iteration method,) moreover, that it analyze the logic and the characteristic of behavior of mathematical model of Markov process. Therefore firstly, it classify, on research of mathematical structure of Markov process, the forward equation and backward equation of Chapman-kolmogorov equation and of kolmogorov differential equation, and then have survey on logic of equation systems or on the question of uniqueness and existence of solution of the equation. Secondly, it classify, at the Markovian sequential decision process, the case of discrete time parameter and the continuous time parameter, and then it explore the logic system of characteristic of the behavior, the value determination operation and the policy improvement routine.

• Advances in environmental research
• /
• v.5 no.3
• /
• pp.169-178
• /
• 2016

This study aimed at determining the treatability of high-strength wastewater (chemical oxygen demand, COD>4000 mg/L) using combined anaerobic-aerobic granular sludge in lagoon systems. The lagoon systems were simulated in laboratory-scale aerated and non-aerated batch processes inoculated with dried granular microorganisms at a dose of 0.4 g/L. In the anaerobic batch, a removal efficiency of 25% was not attained until the 12th day. It took 14 days of aerobic operation to achieve sCOD removal efficiency of 94% at COD:N:P of 100:4:1. The best removal efficiency of sCOD (96%) was achieved in the sequential anaerobic-aerobic batch of 12 days and 2 days, respectively at COD:N:P ratio of 200:4:1. Sequential anaerobic-aerobic treatment can achieve efficient and cost effective treatment for high-strength wastewater in lagoon systems.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.148-154
• /
• 2012

In this paper, we propose an algorithm to conserve resources of the common control channel in a cognitive radio network by rejecting the redundant users using cooperative spectrum sensing. The proposed scheme is investigated under the paradigm of active spectrum sensing and a sequential detection technique. The algorithm is based on the J-divergence between the hypotheses of non primary user operation and the otherwise case. We select the most significant eigenvalues, which primarily affect the global statistical test. For the case where interference is from a secondary system transmission, a match filter is first employed to remove the degradation, and then the proposed algorithm is employed to remove the cooperative sensing nodes. Numerical results are provided and compared with conventional cases in order to validate the performance of the proposed algorithm.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.2
• /
• pp.73-83
• /
• 2015

This paper proposes a TFT-LCD defect blob detection algorithm using the sequential defect detection method. First, for every pixel, a defect possibility is determined by the intensity difference and the defect candidates are detected according to the sequential defect detection method. For detected candidate pixels, the defect probability that indicates a potential included in the defect according to the each step. By applying the morphological operation, blobs are comprised of the detected candidates and the defect blobs are detected using the defect possibility of blobs. The validity of the proposed method was demonstrated a simulated image and also then it was tested a real TFT-LCD image. By the experimental results, the proposed method is very effective in TFT-LCD detect detection.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.3
• /
• pp.228-231
• /
• 2007

The intracranial hemorrhage in regions remote from the site of initial operations is unusual but may present as fatal surgical complication. We report a rare case of multiple, sequential, remote intracranial hematomas after cranioplasty in a patient who did not have any prior risk factors. A 51-years-old man was transferred to the hospital after a head trauma. The brain computed tomography (CT) revealed acute subdural hemorrhage on the right hemisphere with prominent midline shifting. After performing decompressive craniectomy and hematoma removal, the patient recovered without any complications. However, the patient showed neurological deterioration immediately after cranioplasty, which was done three months after the first surgery. There was extensive hemorrhage in the posterior fossa remote from the site of the initial operation site. The brain CT taken soon after removing this hematoma evacuation displayed large epidural hematoma on the left hemisphere. This case represents posterior fossa hemorrhage after supratentorial procedure and sequential delayed hematoma on the contralateral supratentorial region thus seems very rare surgical complications. Despite several possible pathogenetic mechanisms for such remote hematomas, there are usually no clear cut relationships with each case as in our patient. However, for the successful outcome, prompt evaluation and intensive management seem mandatory.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2013

In this paper, two new flip-flop circuits with PCRAM latches that are FF-1 and FF-2, respectively, are proposed not to waste leakage during sleep time. Unlike the FF-1 circuit that has a normal PCRAM latch, the FF-2 circuit has a selective write latch that can reduce the switching activity in writing operation to save switching power at sleep-in moment. Moreover, a sequential sleep-in control is proposed to reduce the rush current peak that is observed at the sleep-in moment. From the simulation of storing '000000' to the PCRAM latch, we could verify that the proposed FF-1 and FF-2 consume smaller power than the conventional 45-nm FF if the sleep time is longer than $465{\mu}s$ and $95{\mu}s$, respectively, at $125^{\circ}C$. For the rush current peak, the sequential sleep-in control could reduce the current peak as much as 77%.

• Journal of Veterinary Clinics
• /
• v.4 no.2
• /
• pp.483-490
• /
• 1987

In order to study the compensatory renal function in 6 Korean black goats with 75% reduction in renal mass, some blood chemical values were determined and pathological changes were examined. The results were as follows : 1. BUN level increased significantly from post-operation day 1 through day 30(p<0.01) compared with pre-operation level. Serum creatinine level increased significantly from post-operation day 1 through day 26(p <0.01 ) compared with pre-operation level and remained higher than pre-operation level at day 30(p <0. 05). 2. Serum calcium level increased significantly from post-operation day 4 through day 7(p<0.01) compared with pre-operation level and remained higher than pre-operation level from post-operation day 8 through day 14(p<0.05). Serum phosphorus level decreased at postoperation day 4,5(p<0.05 ) compared with pre-operation level. 3. RBC counts decreased at post-operation day 2. 3, 5. to 30(p<0.05), PCV decreased at post-operation day 2, 3, 5, 7, to 30(p<0.05), hemoglobin level decreased at post-operation day 2, 8, 14, to 30(p<0.05), compared with pre - operation levels, respectively. 4. The ventral half of the right kidney was infarcted by the ligation of ventral branch of right renal artery.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1346-1353
• /
• 1996

In this paper, we propose a modeling method for the flip-flops and test generation algorithms to detect the faults in the sequential circuits using VHDL in the high-level design environment. RS, JK, D and T flip-flops are modeled using data flow types. The sequence of micro-operation which is the basic structure of a chip-level leads to a control point where varnishing occurs to one of two micro- operation sequence. In order to model the fault of one micro-operation(FMOP) that perturb another micro-operation effectively, the concept of goal trees and some heuristic rules are used. Given a faulty FMOP or fault of control point (FCON), a test pattern is generated by fault sensitization, path sensitization and determination of the imput combinations that will justify the path sensitization. The fault models are restricted to the data flow model in the ARCHITECTURE statement of VHDL. The proposed algorithm is implemented in the C language and its efficiency is confirmed by some examples.