• 한국환경과학회지
• /
• 제19권1호
• /
• pp.89-96
• /
• 2010

The separation of $TiO_2$ wastewater carried out by an electrocoagulation/flotation process, which had various operating parameters. The effect of electrode material (aluminum and four dimensionally stable electrode), applied current (0.07~0.5 A), electrolyte concentration (0~1 g/L), solution pH (3~11), initial turbidity (1000~20000 NTU) and suspended solid concentration (5000~25000 mg/L) were evaluated. Turbidity removal efficiency of the soluble anode (aluminum), which could produce metal ions, was higher than that of the dimensionally stable electrode. Considering operation time, turbidity removal and electric power, optimum current was 0.19 A. The more NaCl dosage was high, the less electric power was required. However, optimum NaCl concentration was 0.125 g/L considered removal efficiency, operation time and cost. Initial $TiO_2$ concentration did not affected turbidity removal on the electrocoagulation/flotation operation. The electrocoagulation/flotation process was proved to be a very effective separation method in the removal of $TiO_2$ from wastewater.

• KSBB Journal
• /
• 제15권6호
• /
• pp.605-608
• /
• 2000

Oligodeoxynucleotides (ODNs) were separated by high-performance membrane chromatography (HPMC), a combined system of chromatography and membrane. The separation mechanism involved anion-exchange, and the stationary phase was cation CIM (Convective Interaction Media) DEAE disk (16${\times}$3 mm). Two types of mobile phase were used, buffer A (20mM Tris-HCl, pH 7.4) and buffer B (buffer A + 1M NaCl). As the amount of NaCl dissolved in buffer linearly increased, the retention time shortened, which enabled a gradient elution mode. Based on the number of theoretical plates and resolution observed, the optimum mobile phase and operating condition (Buffer A/Buffer B=50/50 - 20/80 vol%, gradient time 2 min) were experimentally determined. In this experimental condition, ODNs were separated within 2 min at a mobile phase flow rate of 6 ml/min.

• KSBB Journal
• /
• 제24권2호
• /
• pp.212-215
• /
• 2009

본 연구에서는 식물세포배양으로부터 항암물질 paclitaxel을 고 순도, 고 수율로 분리 가능한 액-액 추출 공정에서의 주요 공정 변수들을 최적화 하였다. 액-액 추출을 위한 최적의 유기용매 (methylene chloride) 첨가량, 추출횟수, 혼합시간, 정체시간은 각각 0.28 (v/v), 3 (times), 30 min, and 40 min 임을 알 수 있었다. 액-액 추출 공정은 특히 메탄올을 이용한 biomass 추출물에 포함되어 있는 다량의 극성불순물을 제거하는데 매우 효과적이었다. 또한 액-액 추출 후 농축조건으로는 후속공정에서의 높은 순도의 paclitaxel 뿐만 아니라 작업의 용이성 측면에서 액-액 추출액을 rotary evaporator로 완전히 농축하는 것이 가장 바람직함을 알 수 있었다.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.661-666
• /
• 2009

Froth flotation has been carried out in order to produce roasting-molybdenite concentrate from molybdenite ore in the Shin-yeomi mine. In our study, roasting-molybdenite (Mo 0.43%) from Shin-yeomi mine was recovered by varying the conditions of regrinding time, dosage of collector and alkalinity. Liberation and flotation efficiency more were effective at regrinding time of six minutes than at single grinding. Mo recovery curves increased considerably as dosage of kerosene increased, whereas Mo grade curves decreased gradually. The separation efficiency of molybdenite was effective when the dosage of collector (kerosene) was adjusted to 300 g/t. The molybdenite concentrate was agglomerated in the range of pH 5-7 and its separation efficiency increased to pH 9-10. The concentrate of 49.5% Mo grade ($MoS_2$, 82.6%) with 81.5% recovery from Shin-yeomi molybdenite ores was obtained under conditions of 20% pulp concentration, 300 g/t kerosene 325 g/t frother (AF65), 2.5 kg/t depressant ($Na_2SiO_3$), pH 9-10 and four cleaning times. In the future, a trial run that can separate up to 50% Mo grade from Shin-yeomi molybdenite ores will be performed.

• Membrane and Water Treatment
• /
• 제13권3호
• /
• pp.139-145
• /
• 2022

Development in advanced separation processes leads to the significant advancement in polymeric membrane preparation methodology. Therefore, present research investigated the preparation and characterization of cellulose acetate membrane by phase inversion separation method to determine optimized operating parameters. Prepared CA membrane's performance was been analyzed in terms of % rejection and flux. Investigation was conducted to study effect of different parameters such as polymer concentration, evaporation rate, thickness of film, coagulation bath properties, temperature of polymer solution and of the coagulation bath etc. CA membrane was fabricated by taking polymer concentration 10wt% and 11wt% with zero second evaporation time and varying film thickness over non-woven polyester fabric. Effect of coagulation bath temperature (CBT) and casting solution temperature were also been studied. The experimental results from SEM showed that the surface morphology had been changed with polymer r concentration, coagulation bath and casting solution temperature, etc. Lower polymer concentration leads to lower precipitation time giving porous membrane. The prepared membrane was tested for advanced waste water treatment of relevant effluent stream in pilot plant to study flux and rejection behavior of the membrane.

• 분석과학
• /
• 제7권1호
• /
• pp.25-31
• /
• 1994

정지상과 이동상에 대하여 선택성의 차이가 크지 않은 알킬페놀류에 대한 2차 화학평형이론을 적용하여 분리도에 미치는 pH 영향을 연구하였다. 이동상으로는 물-아세토니트릴을 사용하였으며, pH는 탄산나트륨 완충 용액으로 조절하였다. 인접한 봉우리간의 선택성을 최대로 하는 pH 값은 $k^{\prime}_{HA}/k^{\prime}_{A-}$와 평균 해리상수값(${\Delta}pK$)으로부터 구하였으며, 이 방법에 의해 결정된 최적 pH는 11.18이었다. 선택성의 효과를 최대로 얻기 위하여 pH와 용매의 선택성을 동시에 고려하였다. 결정된 최적의 pH 조건하에서 메탄올, 아세토니트릴, 테트라히드로퓨란, 물의 4성분 혼합 용매 시스템을 이용하였고, 통계적인 심플렉스 방법인 overlapping resolution maps(ORM)을 사용하여 최적 용매 조성을 결정하였다. 이 방법에 의하여 결정된 최적 용매 조성비는 MeOH : ACN : THF = 14.4 : 81.8 : 2.8이었다.

• 한국진공학회지
• /
• 제8권3B호
• /
• pp.290-296
• /
• 1999

We have studied the phase separation and ordering phenomeon of InAlAs epilayers grown on InP substrate by LP-MOCVD with DCXRD, PL, and TEM. From the intensity and FWHM of DCXRD and PL, we observed that the structural and optical quality of InAlAs epilayers were improved as growth temperature increased. The band-gap reduction due to phase separation and ordering is 291, 246, and 28 meV in the InAlAs epilayers grown at $565^{\circ}C$, $615^{\circ}C$, and $700^{\circ}C$, respectively, and shows the same from the InAlAs epilayer town at 5$65^{\circ}C$ in which the HRTEM micrograph showed the lattice fringe between InAs-rich and AlAs-rich regions was tilted by $2^{\circ}$ due to composition difference. However the maximum degree of ordering by intensity of extra spots was obtained at medium growth temperature. The annealing experiment by RTA of sample grown at $565^{\circ}$ shows a maximum band-gap shift of 78eV at $880^{\circ}$ for 3 min, and TEM shows that the origin of the blue shift of band-gap is the complete disappearance of ordering. Through annealing we can conclude that short time annealing affects only ordering and that most of the total band-gap reduction (~3/4) occurs by phase separation.

• 멤브레인
• /
• 제13권4호
• /
• pp.268-282
• /
• 2003

불완전 분리의 실질적인 분리투과 특성을 근거로 하는 모사모델을 이용하여 투과증발 막촉진 에스터화 반응의 실질적인 거동을 연구하였다. 막의 분리효율, 막의 물제거 능력을 모델에 포함시킴으로써 반응모사를 통하여 이들이 막촉진반응에 어떻게 영향을 끼치는지를 체계적으로 관찰할 수 있었다. 막을 통한 비완전분리가 일어날 경우에 초기 반응물 몰비율이 1이 아닐 때 반응 혼합물중 소량으로 존재하는 반응성분이 투과되거나, 혹은 초기 반응물 몰비율이 1인 반응 혼합물중 어느 반응성분이 투과되든지 반응이 완결될 수 없었다. 생성물인 에스터가 물과 함께 일부 투과될 경우 정방향 반응속도를 증가시켜 시간에 따른 반응 전환률을 증가시킨다. 막을 통한 불완전 분리시 막을 통한 투과로 인하여 발생하는 반응혼합물의 부피감소로 인하여 반응성분 뿐 아니라 생성성분의 농도가 증가되는데 이들 농도증가가 반응속도에 상반된 영향을 끼친다; 반응물 농축은 반응속도를 증가시키나 생성물 농축은 역방향의 반응을 촉진시킴으로서 반응속도를 감소시킨다. 반응초기에는 반응물 농축효과가 우세하나 반응이 진행됨에 따라 생성물 농축효과가 우세하여 반응속도를 저하시킴이 모사결과 관찰되었다.

• 대한전자공학회논문지TC
• /
• 제46권5호
• /
• pp.48-55
• /
• 2009

본 논문에서는 효율적인 RFID 시스템을 위한 Adaptive Group Separation 알고리듬을 제안하였다. AGS 알고리듬은 최적의 초기 prefix size j을 결정하고 개의 그룹으로 태그를 나눈다. 리더는 그룹을 차례로 하나씩 호출하여 태그 ID를 검색한다. 만약 충돌이 발생하면 리더는 충돌이 발생한 첫 번때 비트에 '0' 또는 '1'을 추가한다. 결과적으로, 태그를 인식하기 위한 전송비트와 인신 시간이 감소한다. 본 논문에서 제안한 AGS 충돌방지 알고리듬은 태그의 개수를 256개까지 변화시켜 가면서 반복횟수와 전송비트수를 기존의 충돌방지 알고리듬과 비교하였다. 본 논문에서 제안한 AGS 알고리듬은 모의실험 결과를 통한 성능평가에서 슬롯 이진 트리 알고리듬보다 반복횟수는 약 32.3% 개선되었으며, 전송비트수는 약 1/40배 감소하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.111-116
• /
• 2001

Waste office paper, photocopied or laser printed, has recently increased along with office automatization. In waste office paper, toner ink is used as the printing medium in place of conventional oil ink. Since toner ink cannot be saponificated by alkali and be decolored by bleaching, different from the case of oil ink, toner remains on regenerated paper as black specks. Although cascade recycling of waste office paper is compelled at present, the demand for low-grade paper is limited. From such circumstances, a new separation process for waste office paper is demanded to achieve parallel recycling. At the first stage of separation studies, the sharpness of separation is evaluated using small separators to obtain fundamental data. In a lab-scale separator, the sample amount of one feed is generally a few grams. However, the sample amount used for brightness, ERIC, and image analysis that are generally used to evaluate the efficiency of deinking are not small for lab-scale tests of these analyses. This paper describes an investigation of a sheet preparation method by a small amount of sample under 0.5g and compares the precision of toner content determination of spectroscopic analysis and image analysis from the viewpoint of separation evaluation. The easiness and convenience of the operation using only general-purpose equipments has also been set as a principle purpose. From the viewpoint of an analysis that yields high precision with a small amount of sample in short time, the method calculating the absorption coefficient from diffuse reflectance in the visible region is the most rational method in this study.