• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2867-2873
• /
• 2020

In reprocessed uranium, derived from an impoverished fuel of light-water moderated reactors, there are isotopes of ^{232, 234, 236}U, which make its recycling remarkably difficult. A method of concentration of ²³⁵U target isotope in cascade's additional product was proposed to recover the isotopic composition of reprocessed uranium. A general calculation procedure is presented and a parameters' optimization of multi-flow cascades with additional products. For the first time a numeric model of a cascade that uses the cuts of partial flows of stages with relatively high separation factors was applied in this procedure. A novel computing experiment is carried out on separation of reprocessed uranium hexafluoride with providing a high concentration of ²³⁵U in cascade's additional product with subsequent dilution. The parameters of cascades' stages are determined so as to allow reducing the ^{232, 234, 236}U isotope content up to the acceptable. It was demonstrated that the dilution of selected products by the natural waste makes it possible to receive a low enriched uranium hexafluoride that meets the ASTM C996-15 specification for commercial grade.

• KDI Journal of Economic Policy
• /
• v.45 no.3
• /
• pp.1-24
• /
• 2023

This paper empirically examines the relationship between inter-Korean trade and inter-Korean relations over the past three decades. It asks two questions: (1) Does inter-Korean trade contribute to improved inter-Korean relations and peace on the Korean Peninsula? (2) Does improved inter-Korean relations lead to increased inter-Korean trade? The study employs a time-series causal relationship analysis methodology to answer these questions. The findings show that during the progressive government's reign, inter-Korean trade was not impacted by inter-Korean relations. This is due to the implementation of a political-economic separation policy towards North Korea. Moreover, the increase in general trade and processing on commission did enhance inter-Korean relations, reflecting the "inclusive policy" aimed at achieving peace on the Korean Peninsula through inter-Korean trade. In contrast, during the conservative government's reign, inter-Korean relations had a direct impact on inter-Korean trade, with deteriorating relations leading to a significant decrease in trade. This was due to the implementation of North Korea policies that were linked to politics and the economy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.321-326
• /
• 2010

The non-explosive release device using jack mechanism is designed and fabricated for the small satellite. As a triggering actuator for the release device, a piezo rotory motor with torque of more than $1.7kgf{\cdot}cm$ is employed to guarantee stable activation. For performance tests of separation device, we conducted release time test, preload test and shock test. The device was operated within 1.172sec and activated stably under load of 45kgf. Maximum shock was measured as 18G that is much less than the pyro-separation device produces. We confirmed the possibility as a satellite separation device through above presented tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.767-773
• /
• 2010

This paper describes development of a non-explosive separation device which can be equipped on small satellites. The spur geared micro DC motor, which has high reliability and advantage of price, is adopted as an actuator. The proposed separation device has resettability and it does not need extra jig to reload. In addition, the simple structure makes it easy to fabricate and assemble. To verify the performance of the proposed device, the response time tests, maximum preload tests and maximum shock level tests were performed. Also, through the vibration tests and thermal vacuum tests, feasibility of the proposed separation device was shown in launching and space environments. Therefore, we expect that the proposed separation device can replace the imported separation devices in near future.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.197-204
• /
• 2005

Lab-on-a-chip is a miniaturized analytical device in which all of the procedures for the analysis of molecules are carried out, such as pretreatment, reaction, separation, detection, etc. Lab-on-a-chip has increasing concern as a device not only for rapid detection of molecules but also for high throughput screening and point of care, because conventional laborious and time consuming analytical procedures can be substituted. Thus, a lot of microfabrication and analytical techniques for lab-on-a-chip have been developed with microstructures smaller than a few hundreds of micrometers. Separation of the molecules is one of the most important components of lab-on-a-chip, because effective separation method can simplify the design and can provide better sensitivity. The electrokinetic separation based on capillary electrophoresis is most widely employed technique in lab-on-a-chip for the control of fluids and the separation of molecules. In this article, bioseparation techniques and its applications realized in lab-on-a-chip are reviewed.

• YAKHAK HOEJI
• /
• v.52 no.6
• /
• pp.471-479
• /
• 2008

The purpose of this study is to investigate the best way that Oriental medicine contributes for activation of pharmacy management after the separation of prescribing and dispensing practice since July 2000. In order to investigate current pharmacy conditions for handling of Oriental medicine and many problems for administering the Oriental medicine to patients, a questionnaire was written with a list of questions related to pharmacy management with Oriental medicine, and given to 58 subjects via fax or personal visit during the period of April 21 to 30, 2003. The research results was as follows; In th 58 subjects, 45 subjects (77.6%) were pharmacists with a licence for dispensing Oriental medicine. 70.7% of subjects most likely preferred to extract granule as administering type of oriental medicine. About the motivation using Oriental medicine, the reason for activation of pharmacy management was 39.7%, second, the reason for resolving the limitation of treatment over western medicine was 25.9%. Oriental medicine for patients was mainly administered by recommendation with pharmacist (65.5%). In comparison with after and before the separation of prescribing and dispensing, 51.7% of subjects answered that sale volume was decreased after the separation. Concerning the ratio of total sales volume to Oriental medicine within 5 years, 50% of subjects expected that sales volume will increase positively. About treating Oriental medcine, 34.5% of subjects thought the problem is the regulation by limiting 100 kinds of formulary. The most important factor for increasing Oriental medicine selling amount was continueous education for various information of oriental medicine in case of 44.8% of sujects. The best pharmacy to handle oriental medicine was community pharmacy (36.2%). It was expressed the reason why many pharmacists have not been treated oriental medicine because lots of time needs for dispensing prescription from clinics in these 4 years after the separation of prescribing and dispensing. These results lead to the conclusion that the Oriental medicine at pharmacy will greatly increase within 5 years and will be very important portion for pharmacy management.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.06a
• /
• pp.45-58
• /
• 1994

Over the last 20 years, membrane separation processes, such as reverse osmosis, ultrafiltration and microfiltration, have been widely adopted by different industries. Commercial uses of membrane have displaced conventional separation processes, such as distillation, evaporation, precoat filter and so on. Membrane separation processes are often more capital and energy efficient when compared with conventional separation processes. Membrane devices and systems are almost always compact and modular. These are the well-known advantages of membrane separation processes. The disadvantage of the membrane process is that the process does not have scale merit and thus the membrane process is suitable for the small and middle size applications. Energy saving is, of course, the biggest advantage of the membrane process, and in many industries the membrane processes are employed because of this reason. Membrane process has other big advantage. In many applications membrane processes provide much higher quality of product than conventional processes. The example is ultrapure water production by membrane processes in semiconductor industry. Conventional technologies never offer such good quality of pure water. If you can obtain both energy saving and higher quality of product at the same time by membrane processes, this is the best application of membrane processes. One example is the concentration of orange juice by membrane, which has already been commercialized in Japan. Comparing with the conventional vacuum evaporation process, juice concentrated by the membrane process has much better taste and flavor and the energy consumption in the membrane process is much less than the evaporation process. In this paper, first membrane separation technology will be classified and then Japanese membrane manufacturers and new modules and devices under development in Japan will be introduced. Fourth energy saving in membrane process will be discussed and finally practical applications of membrane processes in Japan will be shown.

• Korean Journal of Food Science and Technology
• /
• v.9 no.1
• /
• pp.61-67
• /
• 1977

Seed separation from half-cut red pepper were investigated with free falling, up-and-down shaking and rotating collision methods. The separation rates were related with impact appiied and the rotating case was distinguished from the other two methods. Beside the impact effect, velocity of the pod and tumbling factors were involved. Momentum effectiveness of seed separation were calculated as $2.50{\times}10^{-6}$, $2.09{\times}10^{-6}$, and $3.94{\times}10^{-8}$ for free falling, shaking and rotating method on the same velocity basis, respectively. The tendency of separation rate was similar to that of red pepper drying rate against time.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.225-231
• /
• 2019

In Korea, the minimum separation distance between aboveground high-pressure natural gas pipeline and buildings is regulated by Korea gas safety (KGS) code. In this paper, The technical backgrounds for the revision of the KGS code related to the minimum separation distance was presented. A consequence-based approach was adopted to determine the minimum separation distance by a reasonable accident scenario, which was a jet fire caused by the rupture of one inch branch line attached the gas pipeline. Where, the higher thermal radiation flux threshold was selected for workers in industrial area than for people in non-industrial area, because the workers in industrial area were able to escape in a shorter time than the people in public. As result of consequence analysis for the accident scenario, we suggested the KGS code revision that the minimum separation distances between high-pressure natural gas pipeline installed above ground and buildings should be 30 meter in non-industrial area and 15 meter in industrial area. The revised code was accepted by the committee of the KGS code and now in effect.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.16-19
• /
• 1996

Separation with synthetic membrane have become increasingly important processes in many fields. In the most application of membrane process, polymer membrane is used. the main advantage of polymers as a material for membrane preparation is the relative simplicity of this film formation which enables one to obtain rather high permeability rates. However, polymeric membranes have several limitations, such as high temperature instability, swelling and decomposition in organic solvent, et. al.. These limitations can be overcome by inorganic membrane. At the present time, commercially available inorganic membranes have pore diameters ranging 5nm to 50mm, and the predominant flow regime in such membrane is Knudsen diffusion. Since the Knudsen permeability is directly proportional to the molecular velocity, gases can be separated due to their molecular masses. However, this separation mechanism is only of important for light gases such as H2 and He. Other separation mechanisms like surface diffusion, active diffusion can play an important role only with very small pore diameters(2nm) and give rise to large permselectivities. Therefore, preparation of inorganic membrane with nano-sized pore have been attracting more and more attention.