• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.176-181
• /
• 1997

During a compression molding of continuous fiber reinforced composites, the separation of matrix and fiber is caused by the flow of the molding process. As the characteristics of the products are greatly dependent on the separation, it is very important to clarify the separation in relation to molding condition, degree of needle punching number on the degree of nonhomogeneity are studied.

• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.68-74
• /
• 2003

Methane steam reforming (MSR) reaction for hydrogen production was studied in a membrane reactor (MR) using two tubular membranes, one Pd-based and one of porous alumina. A higher methane conversion than the thermodynamic equilibrium for a traditional reactor (TR) was achieved using MRs. The experimental temperature range was 350-500$^{\circ}C$; no sweep-gas was employed during reaction tests to avoid its back-permeation through the membrane and the steam/methane molar feed ratio (m) varied in the range 3.5-5.9. The best results (the difference between the MR conversion and the thermodynamic equilibrium was of about 7%) were achieved with the alumina membrane, working with the highest steam/methane ratio and at 450$^{\circ}C$. Silica membranes prepared at KRICT laboratories were characterized with permeation tests on single gases (N$_2$, H$_2$ and CH$_4$). These membranes are suited for H$_2$ separation at high temperature.

• 멤브레인
• /
• 제26권1호
• /
• pp.76-85
• /
• 2016

반도체 및 디스플레이 공정에서 배출되는 $N_2/NF_3$ 혼합 가스 분리를 위한 폴리썰폰 중공사막 제조 연구를 수행하였다. 먼저 non-solvent induced phase separation (NIPS)와 vapor induced phase separation (VIPS) 혼합 공정을 이용하여 기체투과성이 높은 고분자 중공사막을 제조하였다. 제조된 중공사막 표면에 PDMS(polydimethylsiloxiane)와 Teflon AF1600(R) 고분자 소재를 이용하여 얇은 박막을 추가적으로 코팅하는 방법으로 기체 분리막을 완성하였다. 제조된 분리막은 코팅된 고분자 소재의 기체 분리 특성에 따라 상이한 $N_2/NF_3$ 분리 성능을 보여주었다. 특히 Teflon AF1600(R) 이 코팅된 중공사막의 경우 $N_2/NF_3$ 분리 성능(> 14)을 보여주었고, $N_2$ 투과도는 4.5 GPU를 나타내었다. 상용 폴리썰폰 막과 비교해 볼 때, 투과도는 약간 감소하였지만 기체 선택도는 크게 증가하였다. 이런 특징은 $N_2/NF_3$를 분리하는 분리막 구조로써 큰 가능성을 지니는 것으로 판단된다.

• 센서학회지
• /
• 제29권2호
• /
• pp.89-92
• /
• 2020

Polytetrafluoroethylene (PTFE) fibers are widely used in the textile industry, filter media, membrane distillation, electronic appliances, and construction. In this study, PTFE-polyethylene oxide (PEO) fibrous membranes were fabricated by emulsion electrospinning; subsequently, pure PTFE nanofibers were obtained via sintering. PTFE-PEO electrospinning solutions were prepared using different weight ratios to determine the optimized condition. As the ratio of the PEO increased, the fiber structure improved. Scanning electron microscopy and Fourier-transform infrared spectroscopy observations indicate that PEO is removed and PTFE fused gradually to form bonds among them during sintering. The obtained pristine PTFE membrane demonstrated hydrophobicity at 143.6° water contact angle and oleophilicity at 0° oil contact angle, which is known to be utilized for oil/water separation. A simple separation experiment was performed to remove oil droplets from water. The PTFE membrane exhibited good chemical stability and a high surface-area-to-volume nanofiber ratio. These excellent properties suggest that it is applicable to oil/water separation in harsh chemical environments.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.149-149
• /
• 2022

Accurate quantitative evaluation of baseflow contribution to streamflow is imperative to address seasonal drought vulnerability, flood occurrence and groundwater management concerns for efficient and sustainable water resources management in watersheds. Several baseflow separation algorithms using recursive filters, graphical method and tracer or chemical balance have been developed but resulting baseflow outputs always show wide variations, thereby making it hard to determine best separation technique. Therefore, the current global shift towards implementation of artificial intelligence (AI) in water resources is employed to compare the performance of deep learning models with conventional hydrograph separation techniques to quantify baseflow contribution to streamflow of Piney River watershed, Tennessee from 2001-2021. Streamflow values are obtained from the USGS station 03602500 and modeled to generate values of Baseflow Index (BI) using Web-based Hydrograph Analysis (WHAT) model. Annual and seasonal baseflow outputs from the traditional separation techniques are compared with results of Long Short Term Memory (LSTM) and simple Gated Recurrent Unit (GRU) models. The GRU model gave optimal BFI values during the four seasons with average NSE = 0.98, KGE = 0.97, r = 0.89 and future baseflow volumes are predicted. AI offers easier and more accurate approach to groundwater management and surface runoff modeling to create effective water policy frameworks for disaster management.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1350-1354
• /
• 2004

This paper proposes a simple but practically useful model for preventing fraud of users called "ERBAC03". The new model consists of qualified mandatory and discretionary features for roles and locations, including the assignment of permissions for the appropriate roles and the assignment of roles for the appropriate locations. Moreover, a static separation of duty (SSoD) principle is applied to the new model for integrity requirements of security systems. The paper also explores some extensions of ERBAC03 including the new model using the SSoD concept from some experiments. The experimental results prove the efficiency improvement of the proposed model that can make benefits for large enterprises.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1360-1364
• /
• 2004

This paper propose an extended model for role-permission assignment based on locations called "Enhanced Role-Based Access Control (ERBAC03)". The proposed model is built upon the well-known RBAC model. Assigning permissions to role is considered too complex activity to accomplish directly. Instead we advocate breaking down this process into a number of steps. The concept of jobs and tasks is specifically introduced to facilitate role-permission assignment into a series of smaller steps. This model is suitable for any large organization that has many branches. Each branch consists of many users who work in difference roles. An administration tool has been developed to assist administrators with the administration of separation of duty requirements. It demonstrates how the specification of static requirements can be done based on "conflicting entities" paradigm. Static separation of duty requirements must be enforced in the administration environment. Finally, we illustrate how the ERBAC03 prototype is used to administer the separation of duty requirements.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.353-353
• /
• 2009

It is an important task to construct a recycling society with a low damage on the environment in our century. Magnetic separation is expected to be applied for the industrial waste treatment as an important supporting technology. In the magnetic separation of dry condition, the cohesive force between particles is strong compared with that in the wet condition's magnetic separation. The use of high magnetic field by the superconducting magnet enhances the powder's magnetic substance capture ability of the magnetic separation. In this study, the POSCO's coolant sludge of hot rolled steel was used for the superconducting magnetic separation of dry condition. Cryo-cooled NB-Ti superconducting magnet with 100 mm room temperature bore and 600 mm of height was used for magnetic separator.

• ETRI Journal
• /
• 제37권4호
• /
• pp.780-786
• /
• 2015

This paper describes an audio source separation that is based on nonnegative matrix factorization (NMF) and expectation maximization (EM). For stable and highperformance separation, an effective auxiliary source separation that extracts source residuals and reprojects them onto proper sources is proposed by taking into account an ambiguous region among sources and a source's refinement. Specifically, an additional NMF (model) is designed for the ambiguous region - whose elements are not easily represented by any existing or predefined NMFs of the sources. The residual signal can be extracted by inserting the aforementioned model into the NMF-EM-based audio separation. Then, it is refined by the weighted parameters of the separation and reprojected onto the separated sources. Experimental results demonstrate that the proposed scheme (outlined above) is more stable and outperforms existing algorithms by, on average, 4.4 dB in terms of the source distortion ratio.

• Mass Spectrometry Letters
• /
• 제12권4호
• /
• pp.186-191
• /
• 2021

A new method for chemical separation of light rare-earth elements (LREEs) using gas-pressurized extraction chromatography (GPEC) is described. GPEC is a microscale column chromatography system that features a constant flow of solvents, which is created by pressurized nitrogen gas. The separation column with a Teflon tubing was packed with LN resin. The proposed GPEC method facilitates production of lesser chemical wastes and faster separation owing to the use of low solvent volume compared to traditional column chromatography. We evaluated the separation of Ba, La, Ce, and Nd using various elution solvents. The column reproducibility of the proposed GPEC system ranged from 2.4% to 4.9% with RSDs of recoveries, and the column-to-column reproducibility ranged from 3.1% to 6.3% with RSDs of recoveries. The proposed technique is robust, and it can be useful for the fast separation of LREEs.