• Resources Recycling
• /
• v.30 no.4
• /
• pp.64-74
• /
• 2021

The importance of uranium metal is growing day by day in light of its increasing global demand for fulfilling societal needs through atomic power programs. Considering the high demand for uranium, it is necessary to find innovative hydrometallurgical techniques to separate uranium from other associated elements, especially vanadium. This study deals with the separation of uranium(VI) and vanadium(V) from sulfuric acid solutions using commercial amine-based extractants diluted in kerosene. The concentrations of the sulfuric acid solutions ranged from 0.005 to 5.0 mol/L. The effect of extractant concentration ranging from 0.005 to 0.2 mol/L was studied. The temperature was maintained at 25℃ and the experiment was performed for 30 min at an aqueous: organic phase ratio of 1 (A:O = 1:1). The calculated separation factors (SFs) are presented and comparisons are made among all the experiments.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.103-107
• /
• 2008

Membrane process has been focused as an alternative separation process because not only it exhibits a high selectivity compared with a traditional distillation process, but also it is known to be an energy saving separation process. Inorganic membrane, especially zeolite membrane, has been studied since it can be operated in severe conditions compared to the organic membranes. Recently, new zeolite materials are tested as an inorganic membrane material to overcome disadvantages of existing zeolite membranes. Kalsilite can be used as an inorganic membrane material for gas separation and selective water separation from water/organic mixtures because it is expected to be hydrophilic resulted from Si/Al ratio of 1 like zeolite 4A and has a narrow pore size of 0.36 nm. In this study, kalsilite was synthesized by a new economical hydrothermal process using Si : Al : K : $H_2O$ mole ratio of 1 : 1 : 8 : 60. The synthesized kalsilite powder was confirmed by XRD and has a mean diameter of $2.73{\mu}m$. The vapor adsorption test showed the synthesized kalsilite is hydrophilic.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.605-613
• /
• 1992

NCO-terminated prepolymers were synthesized by reacting carbonate-type polyol(PTMCG)($M_w=1,000$ and 2,000) with MDI and N-methyldiethanolamine, as a chain extender. Carbonate-type polyurethane containg zwitterionic group was prepared by reacting the prepolymer with 1,3-propane sultone. From the IR and NMR spectra of model reactions, it was known that the ionization occurred under the same condition. The structure of zwitterionic carbonate-type polyurethane(ZPU) therefore could be confirmed from the model reactions. Glass transition temperature(Tg) ranged between $-15{\sim}-30^{\circ}C$ from the thermal data. Tg was between $-15{\sim}-18^{\circ}C$ for a series of ZPU10 samples and between $-25{\sim}-26^{\circ}C$ for a series of ZPU20 polymers. Tensile strength increased with mole ratio of ionic content. On the contrary, elongation was rather dropped with mole ratio of ionic content. ZPU10-30 having better tensile strength and less elongation was selected as a membrane for the concentration of ethanol aqueous solution through pervaporation. To obtain the better selectivity, it was crosslinked with HMDI. In the swelling test, it showed the higher swelling degree at around 50wt% ethanol concentration due to the plastization effect of ethanol. To optimize the separation capacity, two operating factors-feed concentration and temperature-were considered. The overall separation capacity was as follows : separation factor, 2~83.2 ; the flux, $25.4{\sim}58.8g/m^2hr$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.283-292
• /
• 2005

This paper predicts premature failure load of reinforced concrete beams by epoxy-boned partially steel plates. A parametric study is conducted to estimate premature failure load of beams such as with or without stirrups, unplated length ratio, steel and reinforcement ratio, shear span to depth ratio of reinforcement beam. By results of finite element analysis, it turned out that the unplated length played a dominant role in partially plated beams but reinforcement ratio and shear span to depth ratio effected the premature failure load. The approximate expression with regard to combined design variables is compared with experimental results. It shows closely agreement.

• Geomechanics and Engineering
• /
• v.25 no.2
• /
• pp.159-170
• /
• 2021

Particle size of tailings in different areas of dams varies due to sedimentation and separation. Saturated hydraulic conductivity of high-stacked talings materials are seriously affected by void ratio and particle breakage. Conjoined consolidation permeability tests were carried out using a self-developed high-stress permeability and consolidation apparatus. The hydraulic conductivity decreases nonlinearly with the increase of consolidation pressure. The seepage pattern of coarse-particle tailings is channel flow, and the seepage pattern of fine-particle tailings is scattered flow. The change rate of hydraulic conductivity of tailings with different particle sizes under high consolidation pressure tends to be identical. A hydraulic conductivity hysteresis is found in coarse-particle tailings. The hydraulic conductivity hysteresis is more obvious when the water head is lower. A new hydraulic conductivity-void ratio equation was derived by introducing the concept of effective void ratio and breakage index. The equation integrated the hydraulic conductivity equation with different particle sizes over a wide range of consolidation pressures.

• Elastomers and Composites
• /
• v.57 no.1
• /
• pp.13-19
• /
• 2022

Polycarbonate diol-based waterborne polyurethane (WPU) was prepared by prepolymer mixing process. The prepolymer mixture contained the polycarbonate diol, isophorone diisocyanate (IPDI), dimethylol propionic acid, triethylamine, and ethylenediamine (EDA). The NCO/OH ratio in the prepolymer was adjusted by controlling the molar ratio of IPDI, and its effects on the properties of WPU were studied. The structure of WPU was characterized by fourier transform infrared spectroscopy. The average particle size increased and viscosity decreased with increasing NCO/OH ratio and EDA content in WPU. The reduced phase separation between soft and hard segments increased glass transition temperature. The reduction in the thermal decomposition temperature could be attributed to the low bond energy of urethane and urea groups, which constituted the hard segment. Additionally, the polyurethane chain mobility was restricted, elongation decreased, and tensile strength increased. The hydrogen bond between the hard segments formed a dense structure that hindered water absorption.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.507-520
• /
• 2022

The Sr isotope ratio, which is used as basic data for rock formation time, crustal and mantle evolution studies, is determined by mass spectrometer such as thermal ionization mass spectrometry (TIMS) or multi-detector inductively coupled plasma mass spectrometry (MC-ICP-MS). In this technical report, we compared how incomplete chemical separation of elements affects the determination of Sr isotope ratios. For the experiment, commercial resin, NBS987(NIST SRM987) Sr isotope standard, and rock standard samples from the Geological Survey of Japan (GSJ) such as JG1a, JB3 and JA1 were used. As a result of the comparative experiment, it was clearly observed that the measured values of ⁸⁷Sr/⁸⁶Sr change when Rb remains due to incomplete separation of the NBS987 Sr isotope standard sample as well as the rock standard samples of GSJ. This indicates that complete separation is an important factor since the calculated value deviates from the true value even though correction for isotope interference by isobar is performed when measuring the isotope ratio with MC-ICP-MS. This also suggests that, when reporting the measurement result of Sr isotope ratio using MC-ICP-MS, the measurement strength of ⁸⁵Rb should be reported together with the measurement strength of all isotopes of Sr so that isotope interference by isobar can be judged.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.197-206
• /
• 2006

This study evaluated the effect of ultrasonic irradiation on improving the flux and cleaning efficiency in membrane process which is widely applied for the treatment of landfill leachate. The experiments on improvement of membrane flux according to the types of membranes(hallowfiber microfiltration, MF and tubular ultrafiltration, UF) were performed with changing frequency($40{\sim}120$ kHz), intensity ($200{\sim}500$ W) and irradiation time of ultrasound as well us operation pressure($0.1{\sim}2.3kg/cm^2$). Membrane was fouled for the first 50 min with primary treated leachate and then the change in flux according to ultrasonic irradiation period was observed for 70 min. Parameters influenced to the recovery ratio corresponding the net flux on pure water and to the enhancement ratio applied after ultrasonic irradiation on the flux were analyzed. In same condition, the flux was improved in proportion to ultrasonic intensity while the improvement of flux was inversely proportional to ultrasonic frequency. The cleaning effect of membrane was delayed and reduced when operation pressure of membrane was high. The recovery ratio and enhancement ratio for $0.1{\mu}m$ MF membrane were 10% and 500%, respectively while those were maximized at $75{\sim}98%\;and\;40{\sim}50%$ for UF membrane for 10,000 and 100,000 MWCO, respectively. In conclusion, it was confirmed that ultrasonic cleaning using mechanical vibration is alternative to water or chemical cleaning for improving membrane flux.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.84-90
• /
• 2001

To investigate morphological characteristics of zephyr produced from two bamboo species, Phyllostachys nigra var. henonis and Gigantochloa apus, basic anatomic properties were examined by scanning electron microscopy and image analysis. According to SEM observation, zephyr from Phyllostachys nigra var. henonis was not of uniform in shape and showed macro crack between vascular bundle sheaths. This may be attributes to the sclerenchymatous fibers connected closely, thus resulting in difficult separation of intercellular layer. Zephyr from Gigantochloa apus was of uniform in shape, which may be caused by easy separation of intercellular layer of sclerenchymatous fibers having thin cell wall and large cell lumen. By image analysis in cross section of two species, the ratio of vascular bundle sheaths and cell wall ratio of sclerenchymatous fibers were examined. The ratio of vascular bundle sheaths in Phyllostachys nigra var. henonis was lower than that in Gigantochloa apus. However, cell wall ratio of sclerenchymatous fibers in Phyllostachys nigra var. henonis was higher than that in Gigantochloa apus.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.869-876
• /
• 1996

Purification of 2,6-dimethylnaphthalene(2,6-DMNA) from the distillate containing a mixture of dimethylnaphthalene(DMNA) isomers of very high concentration was investigated by crystallization-recrystallization combination as a after-treatment for separation and purification of 2,6-DMNA in the light cycle oil(LCO). The separation of individual isomers of DMNA was studied by crystallization with the distillate as a feed. 2,6-DMNA, 2,7-dimethylnaphthalene(2,7-DMNA) and 2,3-dimethylnaphthalene(2,3-DMNA) were concentrated to crystal, and it was fould that separation between a group of 2,6-, 2,7-, 2,3-DMNA isomers and a group of the other DMNA isomers was possible. However, it was not possible to separate 2,6-, 2,7- and 2,3-DMNA from one another. To select the most suitable recrystallization solvent for purification of 2,6-DMNA, several conventional solvents, which have been employed commercially as recrystallization solvents for high purity performance, were tested, through measurement of solubility of 2,6- and 2,7-DMNA. The solvent used were hexane, iso-propyl ether, ethyl acetate and ethanol. From the solubility results for 2,6- and 2,7-DMNA, ethanol seemed to be the most suitable solvent for purification of 2,6-DMNA. Finally, with crystal recovered by crystallization as a feed and ethanol as a solvent, recrystallization experiments were conducted under various conditions. Purification of 2,6-DMNA was easily done with increasing operating temperature and solvent to feed ratio. These results show that the crystallization-recrystallization combination is an effective one for separation of individual isomers of DMNA.