• Title/Summary/Keyword: Separation flow

Search Result 1,794, Processing Time 0.028 seconds

Anti-inflammatory Activities of Lupane-triterpenoids In Vitro and Their Phytochemical Fingerprinting from Leaves of Acanthopanax gracilistylus

  • Li, Xiao Jun;Dai, Ling;Li, Zhi;Zhang, Xiao Dan;Liu, Xiang Qian;Zou, Qin Peng;Xie, Xia
    • Natural Product Sciences
    • /
    • v.21 no.2
    • /
    • pp.104-110
    • /
    • 2015
  • The activities on the inhibition of NO on LPS-induced RAW 264.7 macrophages were investigated in this work. A simple and sensitive method has been developed and validated for fingerprinting analysis of leaves of Acanthopanax gracilistylus W.W. Smith (AGS). The cytotoxicity and inhibition of NO on LPS-induced RAW 264.7 cells of the extract and triterpenoids were determined. Optimal conditions of HPLC analysis were established as follows. The separation was performed with an ODS-C18 column at $30^{\circ}C$, the detected wavelength was 210 nm, the flow rate was 1 mL/min, and the mobile phase consisted of acetonitrile (0.05% phosphoric acid)-0.05% phosphoric acid solution with gradient elution. Our results showed that impressic acid and acankoreaogenin was more effective on the inhibition of NO than the methanol extract and other compounds. There were seventeen peaks coexisted with similarities above 0.95 and nine lupane-triterpenoids including acankoreaogenin and impressic acid detected and identified. The result of anti-inflammatory activities provides a potential explanation for the use of AGS leaves as a herbal medicine in the treatment of inflammatory diseases. Our results also show that acankoreanogenin and impressic acid may be potentially useful in developing new anti-inflammatory agents. In addition, the fingerprint chromatography clearly illustrated and confirmed the material basis for the anti-inflammatory activities of this plant.

Simultaneous Determination of Dictamine, Obacunone and Fraxinellone in Dictamnus dasycarpus cortex by HPLC-DAD (HPLC-DAD를 이용한 백선피의 Dictamine, Obacunone, Fraxinellone의 동시분석법 확립)

  • Song, Ji-Yeon;Lee, Min-A;Yoon, Jeong-Seon;Kim, Dea-Hyun;Kim, Seung-Hyun;Kim, Young-Choong;Sung, Sang-Hyun
    • Korean Journal of Pharmacognosy
    • /
    • v.41 no.4
    • /
    • pp.323-327
    • /
    • 2010
  • A high performance liquid chromatographic (HPLC) method for the simultaneous determination of dictamine, obacunone and fraxinellone was established for the quality control of traditional herb Dictamnus dasycarpus cortex. Separation and quantification were successfully achieved with a Shiseido C18 column ($5\;{\mu}m$, 4.6 mm I.D. ${\times}$ 250 mm) by gradient elution of a mixture of methanol and water at a flow rate of 1.0 ml/min. The diode-array UV/Vis detector (DAD) was used for the detection and the wavelength for quantification was set at 236 nm. The presence of dictamine, obacunone and fraxinellone in this extract was ascertained by retention time, spiking with each authentic standard and UV spectrum. All three compounds showed good linearity ($r^2$ > 0.999) in relatively wide concentration ranges. The R.S.D. recovery of each compound was 101.0~103.7% with R.S.D. values less than 1.0%. This method was successfully applied to the determination of contents of dictamine, obacunone and fraxitnellone in three commercial products of D. dasycarpus cortex. These results suggest that the developed HPLC method is simple, effective and could be readily utilized as a quality control method for commercial products.

Simultaneous Determination of Baicalin and Glycyrrhizin in Eul-Ja-Tang by HPLC/DAD

  • Lee, Mi-Kyeong;Lee, Ki-Yong;Kim, Seung-Hyun;Park, Jung-Hyun;Cho, Jung-Hee;Oh, Mi-Hyun;Baek, Ju-Hyun;Kim, Hyo-JIn;Kim, Young-Choong;Sung, Sang-Hyun
    • Natural Product Sciences
    • /
    • v.14 no.3
    • /
    • pp.147-151
    • /
    • 2008
  • A high performance liquid chromatographic (HPLC) method for the simultaneous determination of marker constituents, baicalin and glycyrrhizin was established for the quality control of traditional herbal medicinal preparation, Eul-Ja-Tang (EJT). Separation and quantification were successfully achieved with a Waters XTerra RP18 column ($5{\mu}m$, 4.6 mm I.D. ${\times}$ 150 mm) by gradient elution of a mixture of acetonitrile and water containing 0.03% phosphoric acid (pH 2.03) at a flow rate of 1.0 mL/min. The diode-array UV/VIS detector (DAD) was used for the detection and the wavelength for quantification was set at 250 nm. The presence of baicalin and glycyrrhizin in this decoction was ascertained by retention time, spiking with each authentic standard and UV spectrum. Both baicalin and glycyrrhizin showed good linearity ($r^2$ > 0.999) in a relatively wide concentration ranges. The R.S.D. for intra-day and inter-day precision was less than 5% and the limits of detection (LOD) were about 30 ng. The mean recovery of each compound was 99.5 - 101.2% with R.S.D. values less than 4.0%. This method was successfully applied to the determination of contents of baicalin and glycyrrhizin in three commercial products of EJT, which resulted in the difference in the contents of these compounds. These results suggest that the developed HPLC method is simple, effective and could be readily utilized as a quality control method for commercial EJT products.

Quantitative Determination of Bioactive Compounds in Some Artemisia capillaris by High-Performance Liquid Chromatography

  • Kim, Sang-Won;Kim, Hyeong-Woo;Woo, Mi-Hee;Lee, Jae-Hyun;Choi, Jae-Sue;Min, Byung-Sun
    • Natural Product Sciences
    • /
    • v.16 no.4
    • /
    • pp.233-238
    • /
    • 2010
  • In order to facilitate the quality control of Artemisia capillaris, a simple, accurate and reliable HPLC method was developed for the simultaneous determination of the six bioactive compounds: scopolin (1), chlorogenic acid (2), 2,4-dihydroxy-6-methoxyacetophenone 4-glycoside (3), hyperoside (4), isorhamnetin 3-Orobinobioside (5), and scoparone (6), which were selected as the chemical markers of A. capillaris. Separation was achieved on an Agilent Eclipse XDB-C18 column with a gradient solvent system of 0.1% trifluoroacetic acid aqueous-acetonitrile at a flow-rate of 1.0 mL/min and detected at 254 nm. All six calibration curves showed good linearity ($R^2$ > 0.998). A simple reversed phase HPLC method was developed for extracting pharmacologically active compounds scopolin, chlorogenic acid, 2,4-dihydroxy-6-methoxyacetophenone 4-glycoside, hyperoside, isorhamnetin 3-O-robinobioside, and scoparone from A. capillaris using a binary gradient of acetonitrile : 0.1% trifluoroacetic acid with UV detection at 254 nm. The scopolin (1), chlorogenic acid (2), 2,4-dihydroxy-6-methoxyacetophenone 4-glycoside (3), hyperoside (4), isorhamnetin 3-O-robinobioside (5), and scoparone (6) contents of the herb of A. capillaris collected from fifteen district markets in Korea were 0.00~0.90 mg/g, 0.06~7.29 mg/g, 0.06~0.91 mg/g, 0.07~5.05 mg/g, 0.42~13.11 mg/g, and 1.11~29.82 mg/g, respectively. The results demonstrated that this method is simple and reliable for the quality control of A. capillaris.

Quantitative Analysis of the Fifteen Constituents in Hyangso-San by LC-MS/MS (LC-MS/MS를 이용한 향소산 중 15종 성분의 정량분석)

  • Seo, Chang-Seob;Shin, Hyeun-Kyoo
    • Korean Journal of Pharmacognosy
    • /
    • v.47 no.4
    • /
    • pp.381-388
    • /
    • 2016
  • Hyangso-san is a traditional herbal medicine that consists of the seven herbal medicines, Cyperi Rhizoma, Perillae Folium, Atractylodis Rhizoma, Citri Unshius Pericarpium, Glycyrrhizae Radix et Rhizoma, Zingiberis Rhizoma Crudus, and Allii Fistulosi Bulbus. Hyangso-san has long been clinically used to treat the influenza, including headache, ferver, chills, and pantalgia. In this study, we were performed the simultaneous analysis of the 15 marker compounds (liquiritin apioside, liquiritin, ferulic acid, naringin, hesperidin, rosmarinic acid, liquiritigenin, kaempferol, glycyrrhizin, nobiletin, 6-gingerol, elemicin, atractylenolide III, nootkatone, and atractylenolide I) in Hyangso-san using liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS/MS). Column for the separation of the 15 ingredients was used a Waters Acquity UPLC BEH $C_{18}$ analytical column ($2.1{\times}100mm$, $1.7{\mu}m$) at $45^{\circ}C$ by using a mobile phase of 0.1% (v/v) formic acid in water and acetonitrile with gradient condition. Identifications of all analytes were performed using a Waters ACQUITY TQD LC-MS/MS system. The flow rate and injection volume were 0.3 mL/min and $2.0{\mu}L$, respectively. Correlation coefficient of the calibration curve was ${\geq}0.9958$. The values of limits of detection and quantification of the 15 components were 0.002-4.29 and 0.01-12.88 ng/mL, respectively. The result of an analysis using the established LC-MS/MS method, kaempferol and atractylenolide I were not detected, while other 13 compounds were 0.08-56.87 mg/g in lyophilized Hyangso-san sample.

Study on Antecedent Moisture Condition for Seolma Stream Basin

  • Ly, Sidoeun;Shin, Hyun Seok;Kim, Duck Hwan;Kim, Beom Jun;Kim, Hung Soo
    • Journal of Wetlands Research
    • /
    • v.15 no.4
    • /
    • pp.609-618
    • /
    • 2013
  • Curve number (CN), originally developed, compiled by 'The Natural Resources Conservation Service (NRCS)', and has been widely used throughout the world. However, there is the uncertainty of CN derived from the use of antecedent moisture condition (AMC)/Antecedent Runoff Condition (ARC). As in Korea where nearly 70% covered by mountainous area, it is still not sufficient handbook precedent to guide or support the estimation of AMC/ARC. The failure to develop formal criteria of applying AMC/ ARC will be a gaping profession and results not only in uncertainty of CN estimation in particular, but also in designing appropriate structures in Korea as a whole. This paper is aiming at presenting a critical review of AMC/ARC and deriving a procedure to deal more realistically with event rainfall-runoff over wider variety of initial conditions. Proposed methods have been developed. It is based on modifying estimated runoff to observed runoff with coefficient of determination and then applying different algebraic expression with the verification of AMC by antecedent rainfall table of NEH-1964. The result shows that algebraic expression by Arnold et al. (1996) is the most appropriate for AMC/ARC and the results of AMC/ARC estimation criteria are generally very close to each other. Therefore, this algebraic expression might be applied in South Korea condition properly.

Multiscale-Architectured Functional Membranes Based on Inverse-Opal Structures (멀티스케일 아키텍쳐링 기반 역오팔상 구조체 기능성 멤브레인 기술)

  • Yoo, Pil J.
    • Membrane Journal
    • /
    • v.26 no.6
    • /
    • pp.421-431
    • /
    • 2016
  • Novel membrane technologies that harness ordered nanostructures have recently received much attention because they allow for high permeability due to their reduced flow resistance while also maintaining high selectivity due to their isoporous characteristics. In particular, the opaline structure (made from the self-assembly of colloidal particles) and its inverted form (inverse-opal) have shown strong potential for membrane applications on account of several advantages in processing and the resulting membrane properties. These include controllability over the pore size and surface functional moieties, which enable a wide range of applications ranging from size-exclusive separation to catalytically-reactive membranes. Furthermore, when combined with multiscale architecturing strategies, inverse-opal-structured membranes can be designed to have specific pores or channel structures. These materials are anticipated to be utilized for next-generation, high-performance, and high-value-added functional membranes. In this review article, various types of inverse-opal-structured membranes are reviewed and their functionalization through hierarchical structuring will be comprehensively investigated and discussed.

Identification on Fatigue Failure of Impeller at Single Stage Feedwater Pumps During Commissioning Operation (단단 주 급수 펌프 임펠러에서 시운전 중 발생한 피로 절손에 관한 규명 연구)

  • Kim, Yeon-Whan;Kim, Kye-Yean;Bae, Chun-Hee;Lee, Young-Shin
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.18 no.9
    • /
    • pp.937-942
    • /
    • 2008
  • This paper presents a case history on failures of impeller and shaft due to pressure pulsation at single stage feed water pumps in 700 MW nuclear power plant during commissioning operation. The pumps had been service and had run for approximately $40{\sim}50$ hours. For the most part, the failures of impeller occurred with the presence of a number of fatigue cracks. All cracks were associated with the deleterious surface layer of impeller by visual and metallurgical examination. On-site testing and analytical approach was performed on the systems to diagnose the problem and develop a solution to reduce the effect of exciting sources. A major concern at high-energy centrifugal pump is the pressure pulsation created from trailing edge of the Impeller blade, flow separation and recirculation at centrifugal pumps of partial load. Pressure pulsation due to the interaction generating between impeller and casing coincided with natural frequencies of the impeller and shaft system during 1ow load operation. It was identified that dynamic stress exceeding the fatigue strength of the material at the thin shroud section due to the hydraulic instability at running condition below BEP.

Analytical Optimum of Ginsenosides according to the Gradient Elution of Mobile Phase in High Performance Liquid Chromatography (HPLC의 이동상 용매조건에 따른 인삼 Ginsenoside 분석)

  • Park, Ji-Yeong;Won, Jun-Yeon;Lee, Chung-Yeol
    • Korean Journal of Medicinal Crop Science
    • /
    • v.15 no.3
    • /
    • pp.215-219
    • /
    • 2007
  • This study was conducted to analyze not only for the quality guaranteed of red ginseng but also for the minor ginsenosides. Although several studies have reported to analyze ginseng saponins, those were focused to major saponins, including 6 to 7 ginsenosides. As increase of interest in medicinal effect of ginseng products, anasis of various ginsenosides in both red and white ginseng are strongly demanded. To perform optital condition of 12 ginsenoside analysis, We controlled HPLC conditions, such as the gradient elution of the mobile phase. We found the adequate separation method for 12 ginse-nosides. The optimum condition was as following : H$_2$O/CH$_3$CN ratios were 82/18, 70/30, 55/45 and 50/50, respectively. Sol-vent flow rate was 1.00 ma/min. Column temperature was kept to 35$^{\circ}$C. UV detector was set to 203 nm.

Predicting the Aerodynamic Characteristics of 2D Airfoil and the Performance of 3D Wind Turbine using a CFD Code (CFD에 의한 2D 에어포일 공력특성 및 3D 풍력터빈 성능예측)

  • Kim, Bum-Suk;Kim, Mann-Eung;Lee, Young-Ho
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.32 no.7
    • /
    • pp.549-557
    • /
    • 2008
  • Despite of the laminar-turbulent transition region co-exist with fully turbulence region around the leading edge of an airfoil, still lots of researchers apply to fully turbulence models to predict aerodynamic characteristics. It is well known that fully turbulent model such as standard k-model couldn't predict the complex stall and the separation behavior on an airfoil accurately, it usually leads to over prediction of the aerodynamic characteristics such as lift and drag forces. So, we apply correlation based transition model to predict aerodynamic performance of the NREL (National Renewable Energy Laboratory) Phase IV wind turbine. And also, compare the computed results from transition model with experimental measurement and fully turbulence results. Results are presented for a range of wind speed, for a NREL Phase IV wind turbine rotor. Low speed shaft torque, power, root bending moment, aerodynamic coefficients of 2D airfoil and several flow field figures results included in this study. As a result, the low speed shaft torque predicted by transitional turbulence model is very good agree with the experimental measurement in whole operating conditions but fully turbulent model(${\kappa}-\;{\varepsilon}$) over predict the shaft torque after 7m/s. Root bending moment is also good agreement between the prediction and experiments for most of the operating conditions, especially with the transition model.