• 대한음성학회지:말소리
• /
• 제67호
• /
• pp.195-216
• /
• 2008

This paper addresses the problem of single-channel speech separation to extract the speech signal uttered by the speaker of interest from a mixture of speech signals. We propose to apply time-frequency smoothing to the existing statistical single-channel speech separation algorithms: The soft mask and the minimum-mean-square-error (MMSE) algorithms. In the proposed method, we use the two smoothing later. One is the uniform mask filter whose filter length is uniform at the time-Sequency domain, and the other is the met-scale filter whose filter length is met-scaled at the time domain. In our speech separation experiments, the uniform mask filter improves speaker-to-interference ratio (SIR) by 2.1dB and 1dB for the soft mask algorithm and the MMSE algorithm, respectively, whereas the mel-scale filter achieves 1.1dB and 0.8dB for the same algorithms.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.1-6
• /
• 2023

We have been developing a new magnetic filter so that small sized paramagnetic substances can be separated even in a low magnetic field (lower than 2T). The developed filter is a packed ferromagnetic filament with a triangular cross section. The filament has a diameter of 120 ㎛ and a length of 3 mm, and is mechanically packed with a volume ratio of 17.6%. Using this filter, a magnetic separation experiment of hematite was carried out using a superconducting magnet at the field of 2T. Similarly, magnetic separation was performed using a conventional magnetic filter. It became clear that the separation efficiency of newly developed filter is high as that of conventional mesh filter. The smaller sized hematite (<3 ㎛) could be separated though conventional mesh filter could not separate.

• 지구물리와물리탐사
• /
• 제15권2호
• /
• pp.51-56
• /
• 2012

특정한 지질 구조에 의한 이상을 분리하는 문제, 특히 깊이가 다른 샘들에 의하여 중첩된 이상을 수직적으로 분리하는 문제는 중력과 자력탐사 자료 해석에서 매우 필수적이며 중요한 과정이라 할 수 있다. 측정된 퍼텐셜 자료를 단순하게 광역 효과와 남은 이상의 합으로 가정할 수도 있지만, 수직적으로 여러 층인 구조인 경우로 확장하여 특정한 층에 의한 효과를 분리해 내거나 분리된 이상을 깊이에 관하여 정량적으로 규정할 수 있으면, 이것은 깊이 분리라고 부를 수 있을 것이다. 깊이 분리 필터로서 로그 파워 빛띠 분석을 이용한 진동수 필터를 제안한다. 이것을 수치 모델링과 흥해 일대에서 얻은 실제 중력탐사 자료에 적용하였으며, 2 배 깊이만큼 위로 연속 필터와 비교, 검토해 보았다. 수치 모델링과 실제 중력 자료에 적용한 바에 의하면, 이 논문에서 제안한 깊이 분리 필터는 지구물리적인 의미가 있는 중력 불연속면까지의 중력 효과를 잘 벗겨냄으로써 불연속면의 중력 분포를 추정하여 지질 구조를 해석하는 데에 유용한 도구임을 보여주었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.7-11
• /
• 2022

We are conducting research and development of magnetic filters for magnetic separation targeting paramagnetic materials. In order to develop a new magnetic filter with a large magnetic gradient, stainless fiber (SUS430, 120 mm × 3 mm) with a triangular cross section was sintered with a high void ratio (~ 70%) and the magnetic filter (20 mm × 2 mm) was created. When this magnetic filter was used to perform magnetic separation of hematite (particle size 50 ㎛) under a maximum magnetic flux density of 1.49 T, high separation rates were obtained.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.135-135
• /
• 2022

In this study, we evaluated uncertainties in baseflow separation filter methods focusing on changes in recession constant (𝛼) values, which include Lynie & Holick (LH) algorithm, Chapman algorithm, Eckhardt filter, and EWMA filter. Here, we analyzed daily streamflow data at 14 stations in the Urmia Lake basin, Iran, from 2015 to 2019. The 𝛼 values were computed using three different approaches from calculating the slope of a recession curve by averaging the flow over all seasons, a correlation method, and a mean value of the ratio of Q_t+1 to Q_t. In addition to the 𝛼 values, the BFImax (maximum value of the baseflow index (BFI)) was determined for the Eckhardt filter through the backward filter method. As results, it indicates that the estimated baseflow is dependent upon the selection of filter methods, their parameters, and catchment characteristics at different stations. In particular, the EWMA filter showed the least changes in estimating the baseflow value by changing the 𝛼 value, and the Eckhardt filter and LH algorithm showed the highest sensitivity to this parameter at different stations.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.662-667
• /
• 2009

Porous SiC candle filter preforms were fabricated by extrusion and ramming process. To fabricate SiC candle filter preform, commercially available 85 ${\mu}m\;{\alpha}-$-SiC powder and 44 ${\mu}m$ mullite, CaC$O_3$ powder were used as the starting materials. The candle type preforms were fabricated by vacuum extrusion and ramming process, and sintered at $1400{^{\circ}C}$ 2 h in air atmosphere. The effect of forming method on porosity, density, strength (flexural and compressive strength) and microstructure was investigated. Also, corrosion test of the sintered candle filter specimens as forming method was performed at $600{^{\circ}C}$ in IGCC syngas atmosphere. The sintered SiC filter which was formed by ramming process has more higher density and exhibit higher strength than extruded filter. Its maximum density and 3-point bending strength were 2.00 g/$cm^3$ and 45 MPa, respectively.

• 대한환경공학회지
• /
• 제30권2호
• /
• pp.234-238
• /
• 2008

활성슬러지 공정에 막을 침지한 MBR(Membrane Bioreactor)공정에서 고가의 막을 대체하여 부직포 같은 섬유 여과막을 이용한 연구가 수행되었다. 부직포는 저렴한 가격, 저압에서 높은 투과유속의 확보 등 막을 대체할 수 있는 대안으로서 가치가 높다. 그러나 부직포 여과막 모듈은 막에 비하여 비표면적이 현저하게 작기 때문에 이를 증가시키는 노력이 필요하다. 본 연구에서는 활성슬러지 공정에 부직포 여과 관형 막모듈을 침지하여 설치형태와 관직경에 따라 여과압력에 미치는 영향을 실험적으로 검토하였다. 관형 필터의 직경이 같을 때, 반응조내 필터 모듈의 설치형태가 여과압력 변화에 미치는 영향은 없었다. 그러나 필터의 관 직경이 작을수록 여과압력의 상승이 빠르게 나타났고 이는 관내 수리학적 손실에 기인된 것으로 해석되었다. 따라서 관형 부직포 여과막은 관경 10 mm 이상에서 비표면적을 고려하여 설계하고, 반응조내 수직형으로 설치함이 적정한 것으로 나타났다.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.361-369
• /
• 2004

A metal fiber bed has seldom been applied to the practical filtration process despite its excellent mechanical and chemical stability. The filter-bed used in this work was highly porous with open structure, of which apparent porosity was 80 ∼ 90%. Although pressure loss across the filter-bed was very low, separation efficiency was found to be quite high. This paper focuses on the basic filtration mechanisms of a metal filter-bed and a thin ceramic filter from fly ash for reference. The experimental parameters were face velocity, dust loading and porosity of filter-bed. Pressure drop increased with increasing face velocity and dust feeding load for both filters. It also showed that dust particles deposited in the deep flow path, finally resulting in clogging the pore channels. It thereby indicates that the dominating mechanism of the metal filter-bed would be depth filtration. Meanwhile, the thin fly ash composite filters trapped the aerated dust mainly on the surface of the filter medium, so that the instantaneously formed dust layer might cause a steep increase of pressure drop across the filtration system.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.769-778
• /
• 2009

Performances and internal behaviors of the upflow hybrid anaerobic filters treating a dairy wastewater were analyzed to identify the functions and roles of the modular crossflow media and sludge bed layer and to discover their interrelationship in the filter. The media could perform independent biological and physical separation role without buildup of sludge bed, while the role of sludge bed was dependent on the function of the media. The filter packed with the crossflow media did not necessarily require the formation of sludge bed when treating a dairy wastewater. Biological contribution of the media was controlled by that of biologically active sludge bed complementing mutually each other. The gas-liquid-solid separation capability of the media was indispensible to ensure the active biological role of sludge bed, since sludge bed buildup without the media had no independently effective biological function. It was believed that the filter in itself could also function as a selector for physical gas-liquid-solid separation resulting in selectively concentrating particles with superior settleability in sludge bed. The sludge bed in the filter played a key role in the physical solids capture from influent as well as biological organics removal.

• 한국컴퓨터정보학회논문지
• /
• 제22권12호
• /
• pp.55-61
• /
• 2017

In this paper, we propose a novel tracking method using target separation and detection that are based on discriminative correlation filter (DCF), which is studied a lot recently. 'Retainability' is one of the most important factor of tracking. There are some factors making retainability of tracking worse. Especially, fast movement and occlusion of a target frequently occur in image data, and when it happens, it would make target lost. As a result, the tracking cannot be retained. For maintaining a robust tracking, in this paper, separation of a target is used so that normal tracking is maintained even though some part of a target is occluded. The detection algorithm is executed and find new location of the target when the target gets out of tracking range due to occlusion of whole part of a target or fast movement speed of a target. A variety of experiments with various image data sets are conducted. The algorithm proposed in this paper showed better performance than other conventional algorithms when fast movement and occlusion of a target occur.