• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3291-3300
• /
• 2023

Recently molybdenum alloys have been introduced as accident tolerating materials for cladding of fuel rods. Molybdenum element has seven stable isotopes with different neutron absorption cross section used in various fields, including nuclear physics and radioisotope production. This study presents separation approaches for all intermediate isotopes of molybdenum element by squared-off cascades using a newly developed numerical code with Salp Swarm Algorithm (SSA) optimization algorithm. The parameters of cascade including feed flow rate, feed entry stage, cascade cut, input feed flow rate to gas centrifuges (GCs), and cut of the first stage are optimized to maximize both isotope recovery and cascade capacity. The squared off and squared cascades are studied, and the efficiencies are compared. The results obtained from the optimization showed that for the selected squared off cascade, Mo⁹⁴ in four separation steps, Mo⁹⁵ in five steps, Mo⁹⁶ in six steps, Mo⁹⁷ in seven steps, and Mo⁹⁸ in two steps are separated to the desired concentrations. The highest recovery factor is obtained 63% for Mo⁹⁴ separation and lowest recovery factor is found 45% for Mo⁹⁵.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.185-189
• /
• 2001

A study on the new active circulation type oil-water separation system including buoyancy type guidance system was carried out in this paper. Oil-water separation system is composed of several oil separation steps. Buoy type oil guiding system was developed based on the difference of buoyance of water and oil. The design speed of this vessel is 25 knots.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.135-142
• /
• 2014

The performance of inorganic sludge separation system is evaluated. Anaerobic digester effluent sludge is used for feed sludge of this system and hydrocyclone is used for inorganic sludge separation. For phosphorus removal and recovery $MgCl_2$ is pumped into MAP growth tank, a component of inorganic sludge separation system. Using this system inorganic sludge which contained less than 40 % of organic matter can be discharged stably and the maximum amount of separated inorganic sludge is 13.4 % of influent sludge based on dry solid. The amount of phosphorus recovered as MAP(as P) is 16.7 % to influent T-P.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.1-6
• /
• 1994

Many useful biomaterials like enzymes are contained in yeast cells. However, the release of these intracellular biomateriais from the cells is required to recover them with hot water, solvent or various cell breakage methods of mechanical or non mechanical ones. The cell lysis or breakage of yeast is usually made by solvent like ethyl acetate and mechanical disintrgration with high pressure homogenizer or agitating beads mill. The separation of cell debris (i.e. solid liquid separation) is done by centrifuge or membrane depending on the recovery conditions. The features of both separation methods are shown in Tables 1 and 2. As it is often difficult to obtain a clear supernatant by centrifuge from the suspension containing cell debris, the membrane separation is also often used to gel a clear supernatant. In this report we introduce the several applications of membrane separation to separate the cell debris of yeast disintegrated chemically or mechanically and to recover the intracellular biomaterials.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.5
• /
• pp.41-46
• /
• 2015

Three types of experiments, based on the physical properties of oily sludge landfilled soil, were conducted to recover total petroleum hydrocarbons (TPH) from the soil. These experiments included gravity separation, solvent extraction using water, and air floatation. The oil portion was not easily separated from the wet (raw) soil because water molecules aggregate the soil particles, despite the fact that the soil was sandy. However, the drying and grinding processes destroyed the aggregates, causing the TPH recovery to increase to approximately 60% when air floatation was used. The drying process decreased the specific gravity of the soil sample, thereby enhancing the overall recovery of TPH from the soil. Although thermal desorption and/or incineration are common choices for heavily dumped sites, physical separation can recover the oil portion instead of simply removing it.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.447-450
• /
• 2006

Hydrogen separation from multi-component mixture gases by the four-bed PSA process was studied experimentally and theoretically using layered bed of activated carbon and zeolited 5A. Effects of the adsorption time, the linear velocity on the process performance were investigated. The adsorption time and linear velocity affected the purity and recovery of the product $H_2$ purity is increases according as the adsorption time and linear velocity decrease; however, $H_2$ recovery shows an opposite phenomena to the purity. PSA process simulation studied to find optimum operation condition. In the results, 50sec adsorption time, 3cm/s linear velocity might be optimal values to obtain more than 99.999% purity and 65% recovery hydrogen.

• Membrane Journal
• /
• v.22 no.2
• /
• pp.77-94
• /
• 2012

Amorphous ceramic membranes have been developed for gas phase separation and liquid phase separation (water treatment, wastewater treatment and separation of organic solvent or compounds) because of their thermal stability and solvent resistance. In this paper, ceramic membranes were categorized by membrane pore size and materials, and summarized for hydrogen separation, carbon dioxide separation, membrane reactor, pervaporation and water treatment with membrane structure and properties.

• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.142-146
• /
• 2014

Fundamental experiences have been studied for development of pre-treatment process of Sn by-products such as solders. Dry and wet separation/recovery processes were considered by the differences of physical properties. The by-products, which are analyzed by solder metal and oxides. The metal and oxide were simply separated by dry ball-milling process for 12 hours, after that recovery metal powder might be reusable as lead or lead-free solders. In terms of wet separation process, samples were dissolved in $HNO_3+H_2O_2$ and the precipitation were analyzed by $SnO_2$. Overall efficiency of recovery might be increasing via developing simple pre-treatment process.

• Resources Recycling
• /
• v.12 no.5
• /
• pp.36-41
• /
• 2003

Although slag has an enough potential as the secondary resources due to its high content of iron, quite a large amount of slags are simply landfilled when market prices of iron and steel are not so beneficial. The purpose of this study is to investigate the basic characteristics regarding the recovery of iron content from slag by magnetic separation method for the enhancement of its recycling rate. Three kinds of slags such as blast furnace slag, water-cooled converter slag, and air-cooled converter slag were tested taking the strength of magnetic field, revolving speed of drum, and feeding rate of slag as the influential factors on the magnetic separation. For blast furnace slag, the recovery of iron was observed to increase as drum speed and feeding rate were lowered. For water-cooled converter slag, iron recovery was raised as feeding rate was increased and drum speed was lowered. Also, finer slag particles were observed to be more favorable for the higher recovery of iron content. Regarding air-cooled converter slags, higher iron recovery was accomplished when both feeding rate and drum speed were increased or decreased. In addition, when the magnetic field strength was increased the iron recovery was raised, however, the iron grade of separated product was observed to diminish because of the co-separation of impurities.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.51-56
• /
• 2007

Plastics are widely used in everyday life as very useful material. In Korea, about 4 million tons of plastic wastes are generated annually. However, recycling ratio is below 30%, and most of plastic wastes are disposed by landfill and incineration. Hence, the development of material separation technique that can recycle plastic wastes is a necessary situation. In this study, Triboelectrostatic separation for recovery of PET from final plastic wastes obtained from the sink product after wet-type gravity separation has been carried out. In the charging properties, the charge polarity and charge density of PET and PVC were very effective with the tirbo-charger made of PP and HDPE with the decrease in relative humidity. In material separation using HDPE cyclone charger, a PET grade of 96.80% and a recovery of 85.0% were achieved at 30 kV and the splitter position -2cm from the center. In order to obtain PET grade of 98.5%, PET recovery should be sacrificed by 24% with moving the splitter from the center to -6cm position.