• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.20-28
• /
• 2010

The computational flow analysis using LES technique was carried out to investigate the flow characteristics of a RAC chassis consisting of a rear-guider, a stabilizer and a cross-flow fan. The commercial SC/Tetra software was used in this analysis. In view of the results so far achieved, the distribution trends of static pressure and velocity vector of central region except the edges of a CFFan are similar regardless of the number of revolution, and an eccentric vortex exists around the bottom blade of a CFFan. Also, a reverse flow is found in the region between stabilizer and CFFan. Moreover, near the edges of a CFFan, an eccentric vortex is separated to two vortexes. Also these vortexes increase the velocity near a rear-guider, and guide the flow near a rear-guider into stabilizer inlet. Therefore, the reverse flow region is formed in the bottom of a CFFan.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.102-108
• /
• 2011

The flow characteristics of unventilated dual impinging jets were experimentally investigated. Two nozzles with an aspect ratio of 20 were separated by 6 nozzle widths. The Reynolds number based on nozzle width and nozzle exit velocity was set to 5,000. A Particle Image Velocimetry (PIV) was used to measure turbulent velocity components. It was found that, when an impingement plate was installed in the converging region, there was a stagnation region in the inner area between nozzles. However, when it was installed in the combined region, both jets were merged and collided into the plate, showing single-jet characteristics. In addition, at a dual impinging jet, as the distance between a nozzle and an impingement plate decreased, the spanwise turbulent intensity at the plate increased.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.189-194
• /
• 2017

Effects of gas injection scheme and rf driving current configuration in a dual turn inductively coupled plasma (ICP) system were analyzed by 3D numerical simulation using CFD-ACE+. Injected gases from a tunable gas nozzle system (TGN) having 12 horizontal and 12 vertical nozzles showed different paths to the pumping surface. The maximum velocity from the nozzle reached Mach 2.2 with 2.2 Pa of Ar. More than half of the injected gases from the right side of the TGN were found to go to the pump without touching the wafer surface by massless particle tracing method. Gases from the vertical nozzle with 45 degree slanted angle soared up to the hottest region beneath the ceramic lid between the inner and the outer rf turn of the antenna. Under reversed driving current configuration, the highest rf power absorption region were separated into the two inner islands and the four peaked donut region.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.32-41
• /
• 1994

In this study, the TSC spectroscopy has been applied to investigate the influence of structural change due to a process of curing reaction on the electrical properties of epoxy composites cured with acid-anhydride. Five TSC peaks appeared in -160-250[.deg.C]: in the low temperature region below glass transition temperature(T$\_$g/), three relaxation mode peaks due to action of side chains, substitution group or terminal groups have been observed, a peak associated with T$\_$g/, appeared in 110[.deg. C] and p peak due to ionic space charges located in 150[.deg.C]. Each peak was separated into elementary peaks by the partial polarization procedure, and the distribution of activation energy and relaxation time were analized to clearify the origin of each peak. Also, overaboundantly added hardener separated a .betha. peak near 10[.deg. C] into two peaks of .betha.$\_$1/(10.deg. C) and .betha.$\_$2/(20.deg. C) according to increasement of forming field, and the separated hardener was oxidated thermally with increasing surrounding temperatures. The expansion of the free volume need in molecular motion and the reduction of the structural packing density through thermal oxidation process increased TSC between .alpha. peak and .betha. peak and decreased T$\_$g/.

• Korean Journal of Plant Resources
• /
• v.29 no.4
• /
• pp.407-418
• /
• 2016

In this study, the phylogenetic relationship of Korean Hydrangea was evaluated by using sequenced three chloroplast regions and ITS region, including the 7 taxa. The result of phylogenetic analysis indicated that Korean Hydrangea, 7 taxa formed the monophyletic group. This analysis also revealed that subsect. Macrophyllae of Korea was separated into two groups; H. serrata f. acuminate and H. macrophylla group. The H. serrata f. acuminta group was included with H. serrata f. buergeri and H. serrata f. fertilis. These three species form a monophyletic clade, with no significant differences between their nucleotide sequences. The H. serrata f. acuminta group showed a monophyletic group with H. serrata f. buergeri and H. serrata f. fertilis and there is significant differences between their nucleotide sequences. H. macrophylla group was an independent clade distinguished by H. serrate f. acuminate group. Subsect. Petalanthe, Heteromallae and Calyptranthae form a monophyletic group. H. petiolaris which is located in Subsect. Calyptranthae was separated into two subgroups; First subgroup: Jeju island (except for Mt. Halla) and Second subgroup: Ulleung island and Japan. Additional studies of two subgroups of H. petiolaris should be conducted a geographical study and add more samples.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.1-8
• /
• 2010

Some methods employing the Active Contour Model have been widely used to extract face contour. Their performance, however, depends on the initial position of the model and the coefficients of the energy function which should be reconsidered whenever illumination and environmental condition of an input image is changed. Additionally, the number of points in the contour model should increase drastically in order to extract a fine contour. In this paper, we thus propose a novel approach which extracts face contour by segmenting the face region with threshold values obtained by a histogram analysis technique in the separated region of input image. The proposed method shows good performance under various illumination and environmental condition since it extracts face contour by considering the characteristics of the input image.

• The Journal of Information Technology
• /
• v.10 no.3
• /
• pp.15-31
• /
• 2007

Region-of-Interest is the region within the image selected for the users needs. The development of multimedia has made the expectation of image telecommunication higher, but the usage of the image, image transmission time, and image storage create problems. When transmitter or the receiver stops transmission at some point, we can still see the general image and the ROI maintains better image quality if the ROI is specified beforehand. In this paper, three methods are proposed and constructed for the transmission of ROI. In the first method, the ROI and the background are separated and then encoded as described above. The second method is to encode without separating the ROI and the background. The masked region is scaled and the coefficients are increased, then the region is transmitted first. The third method is the loseless coding of the ROI. For loseless coding, real number tap cannot be restored perfectly due to the rounding error, so the method of using integers is used. The proposed method shows a better performance than EZW even in case of ROI's PSNR at quality of 40 dB.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.223-226
• /
• 2003

When we detect side-view face in color image, we decide a candidate face region using skin-tone color, and confirm to the face by template matching. Cang Wei use a left and a right template of face, calculate to similarity value by hausdorff method, and decide the final side-view face. It has a characteristic that side-view face is wide spreading neck region. To get exactly result, face region is separated vertically by 3 pixel unit, and matched template. In this paper, we assume that a side-view face is a right side-view or a left side-view face. We separate a half of the candidate face region vertically, and regard a left side as left candidate face, a right side as right candidate face by template matching. This method detect faster than Gang Wei method.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.2
• /
• pp.53-57
• /
• 2006

In this paper, a Symmetric Dual-gate Single-Si TFT, which includes three split floating n+ zones, is simulated. This structure drastically reduces the kink-effect and improves the on-current. This is due to the separated floating n+ zones, the transistor channel region is split into four zones with different lengths defined by a floating n+ region. This structure allows effective reduction in the kink-effect, depending on thy length of the two sub-channels. The on-current of the proposed dual-gate structure is 0.9 mA, while that of the conventional dual-gate structure is 0.5 mA, at both 12 V drain and 7 V gate voltages. This result shows an 80% enhancement in on-current. In addition, the reduction of electric field in the channel region compared to a conventional single-gate TFT and the reduction of the output conductance in the saturation region, is observed. In addition, the reduction in hole concentration, in the channel region, in order for effectively reducing the kink-effect, is also confirmed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.423-430
• /
• 2005

In this paper, we have simulated a Symmetric Dual-gate Single-Si TFT which has three split floating $n^{+}$ zones. This structure reduces the kink-effect drastically and improves the on-current. Due to the separated floating $n^{+}$ zones, the transistor channel region is split into four zones with different lengths defined by a floating $n^{+}$ region. This structure allows an effective reduction of the kink-effect depending on the length of two sub-channels. The on-current of the proposed dual-gate structure is 0.9 mA while that of the conventional dual-gate structure is 0.5 mA at a 12 V drain voltage and a 7 V gate voltage. This results show a $80 {\%}$ enhancement in on-current by adding two floating $n^{+}$ zones. Moreover we observed the reduction of electric field In the channel region compared to conventional single-gate TFT and the reduction of the output conductance in the saturation region. In addition we also confirmed the reduction of hole concentration in the channel region so that the kink-effect reduces effectively.