• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.322-329
• /
• 2011

A whole genome association (WGA) study was conducted to identify quantitative trait loci (QTL) for body conformation traits in Hanwoo cattle. The phenotypes of 497 steers were recorded from the Hanwoo Improvement Center of National Agricultural Cooperative Federation, Seosan, Korea, and analyzed using the Illumina Bovine 50 k SNP chip. A set of 35,987 SNPs that were available in the Hanwoo population was selected from the chip. After adjustments for the effects of year-season of birth, region and sire, phenotypes were regressed on each SNP using a linear regression model. Three hundred nineteen SNPs were detected for the ten conformation traits (p<0.003). For the significant SNPs, stepwise regression procedures were applied to determine best sets of markers. A total of 72 SNPs were selected (p<0.001), for which the sets of 5, 9, 10, 9, 8, 11, 4, 6, 3 and 7 SNPs were determined for height at withers, rump height, body length, chest depth, chest width, rump length, hip width, thurl width, pinbone width and heart girth, respectively. About 7-26% of the total phenotypic variation was explained by the set of SNPs for each trait. QTL for the conformation traits were harbored on most bovine chromosomes (BTAs). Four SNPs with pleiotropic effects on height at withers and rump height were detected on BTAs 3, 4, 6 and 16. A SNP with pleiotropic effects on chest width and rump length was also detected on BTA10. Two QTL regions, i.e. between 87 and 97 Mb in BTA3 and between 41 and 44 Mb in BTA7, were found, in which SNPs were detected for the five and three conformation traits, respectively. The detected SNPs need to be validated in other Hanwoo populations for commercial application to the genetic improvement of conformation characteristics in Hanwoo via marker-assisted selection (MAS).

• Conservation Science in Museum
• /
• v.20
• /
• pp.13-30
• /
• 2018

Ancient metal objects with inlaid designs were mainly decorated using the wire inlay technique in which "V"- or "U"-shaped grooves were cut in a metal object and then filled with gold or silver. Previous studies on ancient metal objects featuring wire inlay generally attempted to ascertain the inlay techniques applied by examining photomicroscopes acquired during conservation treatment. However, they had limitations when examining wire inlay technique to the minute details. Wire inlay technique can be better investigated by enlarging X-ray films of relics using stereoscopic microscopy under transmitted light. The core processes of the wire inlay technique involve cutting grooves using a chisel and creating the inlay wires, but researchers hold varying opinions about the two processes. This study analyzed the entirety of the materials able to shed light on the main processes applied in Baekje wire inlay by examining X-ray films of relics through stereoscopic microscopy. This exhaustive research revealed that two types of techniques were used for wire inlay during the Baekje period. One is a plastic process of engraving dotted lines using a chisel and is found mostly in objects from the Cheonan and Gongju areas. The other is a cutting process that incises fine lines and was used mostly in relics from the Osan, Seosan, and Wanju areas. It is likely that the Baekje wire inlay techniques feature regional differences because the respective techniques were used or introduced by different groups of people.

• Research in Plant Disease
• /
• v.19 no.1
• /
• pp.21-24
• /
• 2013

White rot caused by Sclerotium cepivorum was reported to be severe soil-born disease on garlic. Disease progress of white rot of garlic (Allium sativum L.) was investigated during the growing season of 2009 to 2011 at Taean and Seosan areas. The white rot disease on bulb began to occur from late April and peaked in late May. The antifungal bacteria, Burkholderia pyrrocinia CAB08106-4 was tested in field bioassay for suppression of white rot disease. As a result of the nucleotide sequence of the gene 16S rRNA, CAB008106-4 strain used in this study has been identified as B. pyrrocinia. B. pyrrocinia CAB080106-4 isolate suppressed the white rot with 69.6% control efficacy in field test. These results suggested that B. pyrrocinia CAB08106-4 isolate could be an effective biological control agent against white rot of garlic.

• The Plant Pathology Journal
• /
• v.18 no.5
• /
• pp.293-299
• /
• 2002

A survey of Fusarium wilt of perilla was conducted in 12 locations in Korea from 1999 to 2001. The disease occurred in 74 out of 187 fields in the 12 locations surveyed, and incidence of the disease reached up to 30% at its maximum in some perilla fields in Seosan and Dangjin. Incidence of the disease in the other locations ranged from 0.2 to 20%. A total of 327 isolates of Fusarium spp. were obtained from stems and roots of the diseased perilla plants. The isolates were identified based on their morphological characteristics. Out of the 327 isolates of Fusarium, 277 isolates from 12 locations were identified as F. oxysporum, 11 isolates from three locations as F. solani,17 isolates from two locations as F. equiseti, 4 isolates from one location as F. avenaceum and 6 isolates from one location as F. subglutinans. The other 12 isolates of Fusarium from four locations were unidentified. Twelve isolates of F. oxysporum and two isolates each of the other Fusarium spp. were tested for their pathogenicity to five cultivars of perilla. Seven isolates of F. oxysporum were strongly pathogenic to some perilla cultivars, but the other five isolates were weakly or not pathogenic. One isolate of F. solani was strongly pathogenic to all the perilla cultivars tested, but another isolate was not pathogenic. All the isolates of F. equiseti, F. avenaceum, and F. Subglutinans tested were not pathogenic to any of the perilla cultivars tested. Symptoms on the perilla plants induced by artificial inoculation with strongly pathogenic isolates of F. oxysporum and F. solani appeared as wilt, stem blight, and root yet, which were similar to those observed in the fields. The isolates which induced symptoms by artificial inoculation were re-isolated from the lesions of the perilla plants inoculated. All the isolates of F. oxysporum tested were not pathogenic to eight other crops inoculated. Results of this study reveal that F. oxysporum is the main pathogen of perilla wilt and that it is host specific to perilla. forma specialis of F. oxysporum causing wilt of perilla is proposed as perillae.

• Journal of Environmental Impact Assessment
• /
• v.20 no.4
• /
• pp.497-507
• /
• 2011

This research studied human health risk assessment of benzene from industrial complexes of Chungcheong Province (Seosan industrial complex) and Jeonla Province (Iksan industrial complex and Yeosoo industrial complex). The residents near the industrial complexes areas can be often exposed to volatile organic compounds (e.g., benzene, toluene, xylenes) through a number of exposure pathways, including inhalation of the organic pollutant via various environmental matrices (air, water and soil), contaminated water, and soil intake. Benzene is well known to be a common carcinogenic and toxic compound that is produced from industrial and oil refinery complexes. In this study, a number of samples from water, air, and soil were taken from the residential settings and public school zones located near the industrial complex sites. Based on the carcinogenic risk assessment, the risk estimates were slightly above $10{\times}10^{-6}$ at all three industrial sites. According to deterministic risk assessment, inhalation was the most important route. The distribution of benzene in the environment would be dependent on vapor pressure, and the physical property influencing the extent of the potential risks. Non-carcinogenic risk assessment of benzene shows that the values of Hazard Index(HI) were much lower than 1.0 at all industrial complexes. Therefore, benzene was not a cause of concern in terms of non-carcinogenic risk posed to the residents near the sites. When compared to probabilistic risk assessment, the CTE(central tendency exposure) cancer risk values of deterministic risk assessment were close to the mean values predicted by the probabilistic risk assessment. The RME(reasonable maximum exposure) values fell within the range of 95% to 99.9% estimated by the probabilistic risk assessment. Since the values of carcinogenic risk assessment were higher than $10{\times}10^{-6}$, further detailed monitoring and refined risk assessment for benzene may be warranted to estimate more reliable and potential inhalation risks to receptors near the industrial complexes.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.245-248
• /
• 2000

It was attempted to find a method to prevent greening of crushed garlic. The storage conditions and heat treatments before crushing were tested for the prevention of greening in crushed garlic. 'Namhae' garlic (sub-tropical type), 'Seosan' and 'Danyang' garlic (traditional) type for cool area) were stored in room temperature(20${\pm}5^{\circ}C$, low temperature(0$^{\circ}C$), and CA(O$_2\;3%,\;CO_2$ 5%) storage for five months, and their samples were crushed. The crushed garlic had no significant differences in greening according to the cultivars. Greening did not occur for the crushed garlic from bulbs stored either in room temperature or CA storage. Greening was the unique symptom observed in crushed garlic from bulbs stored in low temperature. For the prevention of greening, heat treatment was conducted at 40, 35 and 30$^{\circ}C$ prior to make the crushed garlic from bulbs which were stored in low temperature. The effective duration of heat treatment before crushing was 7 days at 30$^{\circ}C$, 3 days at 35$^{\circ}C$, and 1 days at 40$^{\circ}C$ Greening was most effectively prevented in 1 day at 40$^{\circ}C$ treatment. During the heat treatments, changes in enzymatic pyruvic acid content and sprouting rate were slightly observed in garlic bulbs treated at 40$^{\circ}C$ for 1 day.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.458-463
• /
• 1996

Fresh ginger harvested in Seosan, Choongchengnam-do, was used to investigate the pretreatment effect before long-term storage. Wounded ginger were cured at the temperature of 25, 30, $35^{\circ}C$ and the RH 83 and 93% for 1, 3, 5, 7 days, respectively Then the cured ginger were stored in the laboratory scale storage room ($12^{\circ}C,$ 95% RH) in order to find out the optimum curing condition. At a constant temperature and a RH. the longer ginger were cured, the more their weight was decreased; at a constant temperature and a curing period, the higher RH was, the less weight was lost. During the curing process, sprouting rate was accelerated at temperature higher than $30^{\circ}C$ and humidity higher than 90%; mold growing was observed at any temperature and humidity, but especially at $35^{\circ}C$ the rate was relatively faster when the curing time was increased. Hardness of wound surface cured at 93% RH was relatively higher than those cured at 83% RH at all temperatures. The weight loss of store ginger after curing was $2.0{\sim}8.2$ after 30 days and $7.2{\sim}14.2%$ after 60 days storage. Compared with all results through a screening procedure, the condition of 3-days curing at $25^{\circ}C$ and 93% RH showed th best result for minimizing quality changes during storage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.51 no.2
• /
• pp.101-110
• /
• 2018

There is an increasing concern over arsenic (As) contamination in rice since Codex Committee on Contaminants in Food (CCCF) discuss on maximum levels for As in rice in 2010. This study was conducted to reduce As concentration in rice by soil amendment treatments in paddy field soils contaminated by As. The selected four amendments were poultry manure, agri-lime, steel slag, and gypsum with the addition of 3% or 5% (w/w) on a dry basis. The As reduction effect could not be verified, as a result of the pot test by adding poultry manure to the paddy soil around the mine located in Yesan. Among the agri-lime treated rice cultivated pots, the As concentration increased up to 32.1%. On the other hand, the content of As in the sample pots treated with steel slag and gypsum decreased by 65.4% and 63.4%, respectively. On the basis of the results of these pot experiments, the field test was carried out in the As polluted rice field around the mine located in Yesan, and when the four amendments were treated, the As content in the brown rice reduced in all the amendment treatments compared with the control plot. The As reduction in brown rice of the amendment was confirmed to be higher efficiency by the order of gypsum > steel slag > poultry manure > agri-lime. As a result of pot experiments using paddy soil around the mine located in Seosan, As stabilization efficiency in rice and As reduction effect could not be determined by comparison to the control. From the rice cultivated from agri-lime treated pot, As concentration increased by 15.8% in rice. On the other hand, the As content of the pots treated with steel slag and gypsum decreased by 39.1% and 60.2%, respectively. In conclusion, distinguished As reducing effectiveness could be expected by soil amendment treatments for rice cultivation.

• Korean Journal of Agricultural Science
• /
• v.29 no.1
• /
• pp.66-83
• /
• 2002

The economic feasibility analysis including benefit-cost ratio and internal rate of return of a land consolidation and on-farm development project was mainly depended upon the direct benefits and costs arising during project life. Therefore the projects were neglected in allocating the government's financial funds and loans on account of the low economic rate of return of the project. Accordingly the extended benefit-cost analysis method should be introduced and adapted to cover not only the benefit s such as non-market values of environmental and food security fun ct ions of the project but also market values of the project outputs. The main purposes of this study are (1) to prepare a guide line for economic feasibility analysis based on the IBRD and ADB guidelines, (2) to estimate the benefits from productivity increase, labor saving, savings of O&M cost of farm mechanization and project facilities, savings of farmer's burden for their public health, increasing environmental and public functional value of paddy fields, improving food security condition and formation of peaceful and uncontroversial rural society by implementing the land consolidation and on-farm development, (3) to introduce the newly adapted analytical method as the extended benefit cost analysis which could make possible to be included the values of non-market goods such as the food security and the environmental public function of paddy fields. To carry out this study, the existing publications on the guidelines for economic agricultural projects were reviewed and consultation was made with a For the post evaluation study of the land consolidation and on-farm development project, field survey in Jigok and other comparative area were made to get available information. According to the project completion report, Jigok land consolidation and on-farm development project has 55ha of benefit area out of 69ha of gross area. The project was started in November 11th, 2000 and completed october 30th, 2001. The total project costs were amounted to 2,548 million won and the annual project benefits were estimated at 335million won evaluated by domestic market prices. The ERR(Economic Rate of Return) and SRR(Social Rate of Return) of the project based on the shadow pricing system were estimated at 4.4% and 16% respectively. On the other hand, the ERR and SRR based on the domestic market value system were amounted to 6.37% and 14.62%. In conclusion, Korean land consolidation and on-farm development projects have not carried out from the view point of economic rate of return under shadow pricing system but from the view point of domestic pricing system. For the future feasibility studies on land consolidation projects have to be carried out including the non-market values as environmental and food security function of the projects.

• The Korean Journal of Quaternary Research
• /
• v.24 no.2
• /
• pp.23-34
• /
• 2010

The purpose of this study is to clarify the characteristics of geomorphic surfaces and investigate their geomorphological development at Sinsong-ri archaeological sites by the classification of geomorphic surfaces. The sedimentary facies of trench 1, 2 and 3 were identified and pollen analysis was performed at site 3. The geomorphic surfaces are classified by hillslope, valley plain, alluvial fan and river terrace. Most of the study area is located on low hillsides and valley plains are connected with tidal flats extended from small river valley. Also, alluvial fans are distributed over the piedmont and narrow, long river terraces are developed downstream along the Sojeong-stream flowing between valley plain and hillsides. River valleys were deeply eroded during the Last Glacial Maximum (LGM) periods, responded to the lowest sea level among the hillslopes and valley plains are formed during the Holocene. The sedimentary facies are identified composed of basal gravel layers with coarse gravels and sands, relatively thick culture layer of the Bronze Age and thin layer during the early Iron Age in upper part study area. Thus, land uses during the Bronze Age people was performed more intensively comparing to the early Iron Age by deforestation for habitation.