• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.1004-1011
• /
• 2016

In this paper, we suggested the methodology of analyzing and reconstructing of measured electromagnetic emanations from the Micro Controller Unit(MCU) chip of Universal Serial Bus(USB) keyboard. By analyzing electromagnetic emanations, entered information is found at keystroke and furthermore, information security problems such as personal information leakage and eavesdropping can be arisen. USB keyboards make the radiated signal according to the signal transmission mechanism. Electromagnetic emanations were measured by log periodic antenna and wideband receiver and were analyzed by signal processing algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.308-311
• /
• 2015

Depending on the sense of increasing interest in the worldwide software education, in the country high and high school education software from junior high school from 2018 fiscal year I was supposed to be carried out in the required courses. As a result, even in education, for students of software education, although some studies have been conducted, in this paper, by comparative analysis of the domestic and international trends in the software of the training, we advance the future, We suggest the direction of software education should. In addition, faculty members for software education through cooperation with existing middle and high school information subject-to try to present how the draft how available through the lesson plan.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1082-1086
• /
• 2014

A multi-channel microchip electrophoresis (MCME) method with parallel laser-induced fluorescence (LIF) detection was developed for rapid screening of H1N1 virus. The hemagglutinin (HA) and nucleocapsid protein (NP) gene of H1N1 virus were amplified using polymerase chain reaction (PCR). The amplified PCR products of the H1N1 virus DNA (HA, 116 bp and NP, 195 bp) were simultaneously detected within 25 s in three parallel channels using an expanded laser beam and a charge-coupled device camera. The parallel separations were demonstrated using a sieving gel matrix of 0.3% poly(ethylene oxide) ($M_r$ = 8,000,000) in $1{\times}$ TBE buffer (pH 8.4) with a programmed step electric field strength (PSEFS). The method was ~20 times faster than conventional slab gel electrophoresis, without any loss of resolving power or reproducibility. The proposed MCME/PSEFS assay technique provides a simple and accurate method for fast high-throughput screening of infectious virus DNA molecules under 400 bp.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.13-20
• /
• 2006

The inherent problem of a Darrieus wind turbine is its inability to self-start. Usually, a motor is used to provide angular acceleration until lift forces are produced in the airfoil blades or up until the turbine can already sustain its speed on its own. This paper describes a method of improving the self-starting of an H-type Darrieus vertical axis wind turbine (VAWT) by incorporating a helical Savonius turbine thus utilizing a drag-lift combination. The effect of each turbine in the combination relative to each other is investigated by testing a prototype windmill consisting of three NACA 0015 airfoil blades combined with a Savonius rotor with a helix angle of 180 degrees and whose swept area equals 30% of the entire turbine.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.10
• /
• pp.930-937
• /
• 2005

The objective of this study is to investigate the heat transfer performance of flat plate finned-tube heat exchangers with large fin pitch. In this study, twenty-two heat exchangers were tested with a variation of fin pitch, number of tube row, and tube alignment. The heat transfer coefficient decreased with a reduction of the fin pitch and an increase of the number of tube row. The staggered tube alignment improved heat transfer performance more than $10\%$ compared to the inline tube alignment. A heat transfer correlation was developed from the measured data for flat plate finned-tubes with large fin pitch. The correlation yielded good predictions of the measured data with mean deviations of $3.6\%\;and\;6.4\%$ for the inline and staggered tube alignment, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.623-629
• /
• 2009

We have performed replica-exchange molecular dynamics simulations on 41 residue peptide mainly composed of NAC (non A$\beta$ component) sequence in $\alpha$-Synuclein. To investigate conformational characteristics of intrinsically unstructured peptides, we carried out structural analysis on the ‘representative structures’ for ensemble of structures occurring at different temperatures. The secondary structure profile obtained from our simulations suggests that the NAC region of $\alpha$-synuclein can be divided into roughly three helical-like segments. It is found that the overall helix-turn-helix like topology is conserved even though the conformational fluctuations grow as the temperature increases. The coordinate-based and the distance-based representative structures exhibit noticeable differences at higher temperatures while they are similar at lower temperatures. It is found that structural variations for the coordinate-based representative structures are much larger, suggesting that distance-based representative structures provide more reliable information concerning characteristic features of intrinsically unstructured proteins. The present analysis also indicates that the conformational features of representative structures at high temperatures might be related to those in membrane or low pH environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1796-1803
• /
• 2013

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication microstrip patch antenna. The aim of the paper is to design and fabricate an inset fed rectangular microstrip antenna and study the effect of antenna dimensions length (L), width (W) and substrate parameters relative dielectric constant (${\varepsilon}r$), substrate thickness on radiation parameters of band width. PSO algorism was applied to IE3D, low resistance against, band width and advantage, were improved.

• Korean Journal of Materials Research
• /
• v.17 no.10
• /
• pp.555-559
• /
• 2007

The mechanical properties and microstructure of Inconel 690 and 600 alloys with various cooling rates were investigated. Optical microscopy and scanning electron microscopy observations indicated that in case of the cooling rate of $0.5^{\circ}C/min$, discontinuous carbides along the grain boundaries were formed and when the cooling rate was $10^{\circ}C/min$, continuous carbides were formed in Inconel 690 and 600 alloys. For the annealed Inconel 690 alloy with high Cr content, a lot of annealing twins, which led the preferential growth of (111) planes, were observed. However, the annealed Inconel 600 alloy with low Cr content showed a few annealing twins and the preferential growth of (200) planes. Inconel 600 alloy had a larger value of ultimate tensile strength (UTS) than Inconel 690 alloy.

• Anatomy & Biological Anthropology
• /
• v.31 no.4
• /
• pp.167-170
• /
• 2018

Axillary arch is relatively common variation of muscle in the axilla. There were several attentions on axillary arch due to its anatomical and surgical importance. During educational dissection, a variant muscle was found in right arm of 68-year-old female cadaver. The variation of muscle originated from the lateral edge of the latissimus dorsi muscle as muscular form. And then, it crossed the axillary artery and median nerve as tendinous form. Finally it became wide as muscular form and inserted into the pectoralis major. We reported this variant muscle and discussed its clinical significances.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.3
• /
• pp.329-334
• /
• 2019

Sn-Cu alloy powders were prepared via a simple chemical reduction method for the negative electrode materials in lithiumion batteries. The addition of Cu can suppress the growth of Sn particles during synthetic process. Furthermore, the Cu also acts as a matrix phase against the volume change during cycling. With increasing amount of the Cu, a stable $Cu_6Sn_5$ phase formed in the Sn-Cu alloy and its cycle performance greatly enhanced depending on the Cu content. To promote the generation of the $Cu_6Sn_5$ phase, the synthesis temperature is raised to $60-100^{\circ}C$ from the ambient temperature. The Sn-Cu alloy powders prepared at elevated temperatures showed remarkable cycle performances. The Sn-Cu alloy powder obtained at $60^{\circ}C$ exhibited a significantly high volumetric capacity of over 2,000 mAh/cc at the 50th cycle.