• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.45-50
• /
• 2011

A series of expanded graphites is prepared from graphite oxide by changing the heat-treatment temperature, and their lithiation/de-lithiation mechanism and rate performance are examined. A featureless sloping profile is observed in their charge-discharge voltage and dilatometry profiles, which is contrasted by the stepwise plateau-like profiles observed with the pristine graphite. With an increase in the heat-treatment temperature from $250^{\circ}C$ to $850^{\circ}C$, the interlayer distance becomes smaller whereas the electric conductivity becomes larger, both of which are resulted from a removal of foreign atoms (mainly oxygen) from the interlayer gaps. The expanded graphite that is prepared by a heat-treatment at $450^{\circ}C$ delivers the best rate performance, which seems to be a trade-off between the $Li^+$ ion diffusivity that is affected by the interlayer distance and electrical conductivity.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.103-110
• /
• 2005

In this paper, the characteristics of excessive horizontal stress components in Korea were studied using more than five hundred measured data set of in-situ hydraulic fracturing test. Based on the in-situ testing data, the magnitude and orientation of the horizontal stress component and variation of stress ratio (K) with depth were investigated. And also horizontal stress magnitude versus depth relationships and distribution limits of stress ratio components were suggested. For the depth less than 310 m in the entire territory, the stress ratio has a tendency to diminish and stabilize with depth, but fur some areas, it was revealed that the excessive horizontal stress fields with stress ratio close to 3.0 below 200 m in depth have formed. The results from the investigation of excessive horizontal stress regions showed that there existed several regions where the localized excessive horizontal stress was big enough to potentially induce brittle failure around the openings at less than 300 m in depth.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.425-434
• /
• 2014

Objectives: The purpose of this study is to introduce the establishment process and results of the Seoul Metropolitan Government's road map on environmental health policy. Methods: The process consisted of expert group meetings, civic participation, research, and questionnaire survey for priority environmental health policy agenda items in Seoul. Results: The announced vision for the environmental health policy was "a healthy environment, safety in Seoul". This policy was established in order to define environment health policy initiatives for a period of five years with an aim to protect Seoul citizens' health from hazardous environmental factors. The resulting Seoul environmental health policy consisted of four areas and 16 key agenda items. The four areas were "Protection for children against hazardous materials", "Enhancement of health and safety of all", "Carcinogen-free and endocrine-disrupting chemical-free Seoul (reducing environmental exposure to hazardous materials), and "Establish the foundation of environmental health policy". Sixteen key agenda items include the enhancement of management of spaces for children, certification of environmental health status at schools, establishment of a unit responsible for the environmental health of children, strengthening environmental health management for susceptible populations (children, the aged, and the socioeconomically vulnerable), management of hazardous materials, physical hazardous factors (noise, radiation, etc.), indoor air quality, and the enhancement of monitoring, research, and regulation of environment health. Conclusion: The Seoul Metropolitan Government established an environmental health policy road map for a five-year period (2013-2017). To implement this environmental health policy, budget allocation, and detailed execution plans are required.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.101-110
• /
• 2013

Applicable life cycle phase in midlife baby boomers. These, as well as support one parent without the loss of stable employment and income-based children's education and their retirement should be ready at the same time to double, triple economic burdened. Recently in the preparation of these non-retirement and retirement is a major concern. This study we want to look at the characteristics of the baby boomer generation, retirement life planning education status of the country and abroad, retirement life planning program to revitalize the aging of the baby boomer generation life design education. Retirement life planning for raising awareness and design education in the baby boomer life, specifically, how to realize how microscopic analysis to explore the policy and practical alternatives.

• Journal of Ginseng Research
• /
• v.35 no.2
• /
• pp.243-249
• /
• 2011

Korean red ginseng (KRG), the steamed root of Panax ginseng Meyer, has a variety of biological properties, including anti-inflammatory, antioxidant and anticancer effects. Aflatoxin $B_1$ ($AFB_1$) produced by the Aspergillus spp. causes acute hepatotoxicity by lipid peroxidation and oxidative DNA damage, and induces liver carcinoma in humans and laboratory animals. This study was performed to examine the protective effects of KRG against hepatotoxicity induced by $AFB_1$ using liver-specific serum marker analysis, histopathology, and terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling. In addition, to elucidate the possible mechanism of hepatoprotective effects, superoxide dismutase, catalase, glutathione peroxidase, and malondialdehyde were analyzed. Rats were treated with 250 mg/kg of KRG (KRG group) or saline ($AFB_1$ group) for 4 weeks and then received 150 ${\mu}g/kg$ of $AFB_1$ intraperitoneally for 3 days. Rats were sacrificed at 12 h, 24 h, 48 h, 72 h, or 1 wk after $AFB_1$ treatment. In the KRG pre-treatment group, serum alanine aminotransferase, aspartate aminotransferase, and malondialdehyde levels were low, but superoxide dismutase, catalase, and glutathione peroxidase activities were high as compared to the $AFB_1$ alone group. Histopathologically, $AFB_1$ treatment induced necrosis and apoptosis in hepatocytes, and led to inflammatory cells infiltration in the liver. KRG pre-treatment ameliorated these changes. These results indicate that KRG may have protective effects against hepatotoxicity induced by $AFB_1$ that involve the antioxidant properties of KRG.

• Archives of Pharmacal Research
• /
• v.29 no.6
• /
• pp.490-496
• /
• 2006

This study aimed to evaluate in vitro effects of Rheum undulatum L. root on the development of dental caries, especially its effects on viability, dental plaque formation, and glycolytic acid production of Streptococcus mutans and Streptococcus sobrinus. Methanol extract of Rheum undulatum L. root and its fractions were prepared and tested. Among the test extract and fractions, dichloromethane fraction (DF) showed the most active antibacterial activity (inhibition zone: 13-17 mm) against S. mutans and S. sobrinus in a disc diffusion method. Minimal inhibitory concentrations (MICs) of DF against these bacteria ranged from 0.25 to 0.5 mg/mL. Furthermore, DF significantly inhibited the caries-inducing factors of these bacteria. At sub-MIC levels, DF inhibited in vitro dental plaque formation by S. mutans and S. sobrinus ($IC_{50}$= 0.079 and 0.142 mg/mL, respectively), which was caused, in part, by the inhibitory effect on the activity of glucosyltransferases. A significant reduction of glycolytic acid production was found at the concentration as low as 0.032 mg/mL for S. mutans and 0.063 mg/mL for S. sobrinus. The possible bioactive compounds that are inducing in vitro anti-cariogenic activity of DF are unknown. Based on the preliminary phytochemical analysis, the activity of DF may be related to the presence of anthraquinones, cardiac glycosides, coumarines, sterols/terpenes, and phenolics. These results indicate that DF is probably useful for the control of dental plaque formation and subsequent dental caries development.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.1-14
• /
• 2018

The 4th Industrial Revolution has been rapidly changing the environment of all industries and the new technologies as included in the 4th Industrial Revolution has taken the lead in this change. Domestic SME need to change according to the 4th Industrial Revolution. Specially, it is necessary to introduce smart factories to the SME. Thus, this study suggests strategies for successful introduction of smart factories to SME through SWOT analysis about the situation of the SME. As strategies for utilizing its strengths, first, it is an activation through superior competitiveness. Second, the utilization of excellent technology and information is considered. Third, it is suggested to utilize global network-based environment. The strategies for making up for weakness are provided as follows. First, it is suggested to raise awareness of information security. Second, it is considered to establish technical standardization for the construction of evaluation system. Third, the promotion of manpower to secure professional manpower is suggested. The implication of this study is that it suggests the necessity of smart factory to understand and prepare for effective strategies for SME and various external strategies for the fourth industrial revolution.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.888-899
• /
• 2012

In this paper, we present refarming plans and discuss about Radio Waves Law improvements to promote the efficient use of the 1.8 GHz(3GPP band 3) which is emerging as the best prime band for LTE-FDD service. We think it is important to make use of the entire band for mobile use in accordance with contiguity requirement, especially for LTE such as European countries, which is currently separated between different uses. We present two options with illustrative examples to enable that objective. And we identify several provisions in the Radio Waves Law expected to cause controversy when activates one between two options as the policy, and discuss improvements of those.

• Journal of the Korean Institute of Gas
• /
• v.16 no.3
• /
• pp.1-7
• /
• 2012

Natural gas through pipeline is supplied to consumers after its pressure gets down compulsorily. The waste pressure energy of this process can be restored by use of turbo expander which can produce electricity. So, turbo expander conducts two functions - pressure reduction and power generation. The power amount is the enthalpy difference between the inlet and outlet states. The five main factors which affect economic profit are facility price, produced power amount, pre-heating amount, electricity cost, and fuel gas cost. Power generation depends mainly on flow amount because inlet and outlet states are fixed. A methodology to estimate economy in irregular flow pattern is proposed and using this way, a case study was carried out.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.373-378
• /
• 2015

The structure of the human ear is divided into the outer ear, the middle ear, and the inner ear. The inner ear includes the cochlea that plays a very important role in hearing. Recently, the development of an artificial cochlear device for the hearing impaired with cochlear damage has been actively researched. Research has been carried out on the biomimetic piezoelectric thin film ABM (Artificial Basilar Membrane) in particular. In an effort to improve the frequency separation performance of the existing piezoelectric thin film ABM, this paper presents the design, fabrication, and characterization of the production and performance of a partially etched-type ABM material. $O_2$ plasma etching equipment was used to partially etch a piezoelectric thin film ABM to make it more flexible. The mechanical-behavior characterization of the manufactured partially etched-type ABM showed that the overall separation frequency range shifted to a lower frequency range more suitable for audible frequency bandwidths and it displayed an improved frequency separation performance. In addition, the maximum magnitude of the vibration displacement at the first local resonant frequency was enhanced by three times from 38 nm to 112 nm. It is expected that the newly designed, partially etched-type ABM will improve the issue of cross-talk between nearby electrodes and that the manufactured partially etched-type ABM will be utilized for next-generation ABM research.