• 융합신호처리학회논문지
• /
• 제8권2호
• /
• pp.119-123
• /
• 2007

본 논문은 유도전동기의 센서리스 속도제어기에 대한 연구이다. 유도전동기의 속도의 제어방법은 자속추정을 위한 기준모델로써 부하-토크 관측기를 이용한 MRAS(Model Reference Adaptive System)를 기초로 하였으며, 전형적인 MRAS 제어기 특성의 속도응답은 부하 토크 외란의 변화에 영향을 미친다. 따라서 제안된 시스템에서의 부하-토크 관측기를 사용한 속도제어 특성은 부하 토크 외란에 의한 영향을 받지 않는다. 이러한 제어 알고리즘을 MATLAB의 SIMULINK를 통해 전체 시스템을 모델링하여 시뮬레이션 한 결과는 유도 전동기의 다양한 부하 구동 적용에 대한 슬라이딩 속도 제어기의 효과적인 개선이 되었음을 알 수 있었다. 그러므로 이러한 제어 방법들이 산업 응용분야에 확대되어 적용되었으면 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1004-1005
• /
• 2006

This paper investigates a speed sensorless control of induction motor. The control strategy is based on MRAS (Model Reference Adaptive System) using load-torque observer as a reference model for flux estimation. The speed response of conventional MRAS controller characteristics is affected by variations of load torque disturbance. In the proposed system, the speed control characteristics using a load-torque observer control isn't affected by a load torque disturbance. Simulation results are presented to prove the effectiveness of the adaptive sliding mode controller for the drive variable load of induction motor.

• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.79-86
• /
• 2005

In this paper, an estimator scheme for the rotor speed and flux of an induction motor is proposed on the basis of a fourth-order electrical model. It is assumed that only the stator currents and voltages are measurable, and that the stator currents are bounded. There are a number of common terms in the motor dynamics, and this is utilized to find a simple error model involving some auxiliary variables. Using this error model, the state estimation problem is converted into a parameter estimation problem assuming that the rotor speed is constant. Some stability properties are given on the basis of Lyapunov analysis. In addition, the rotor resistance, which varies with the motor temperature, can also be estimated within the same framework. The effectiveness of the proposed scheme is demonstrated through computer simulations and experiments.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.967-979
• /
• 2014

This paper focuses on speed and current sensor fault detection and isolation (FDI) for induction motor (IM) drives. A new, accurate and high-efficiency FDI approach is proposed so that a system can continue operating with good performance even in the presence of speed sensor faults, current sensor faults or both. The proposed three paralleled adaptive observers are capable of current sensor fault detection and localization. By using observers, the rotor flux and rotor speed can be estimated which allows the system to run under the speed sensorless vector control mode when a speed sensor fault occurs. In order to detect speed sensor faults, a threshold-based scheme is proposed. To verify the feasibility and effectiveness of the proposed FDI strategy, experiments are carried out under different conditions based on a dSPACE DS1104 induction motor drive platform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.260-262
• /
• 1998

A new method of induction motor drive, which requires not shaft encoder, is presented. This system has both torque and speed controls that are performed by vector control. The scheme is on the basis of a rotor flux speed control, which is performed by torque producing current and rotor flux, derived from the stator voltages and currents. But, there is a problem with respect to the calculated rotor flux vector, which is an integrating operation by which the rotor induced voltage is converted into the rotor flux. The calculated rotor flux does not work so that it is unstable in initial operation, as motor speed approaches zero. For the proposed rotor flux estimator, a lag circuit is employed, to which both the motor-induced voltage and rotor flux command are imposed, and it is possible to calculate even a low frequency down to standstill. We show the validity of the proposed control method through several computer simulations.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.159-164
• /
• 2013

Difficulty of torque measurements in high-speed permanent magnet (HSPM) motors has necessitated the development of improved torque calculations. Hence, this paper presents an analytical torque calculation of a high speed permanent magnet (HSPM) motor based on the power factor angle. On the basis of analytical magnetic field solutions, the equations for circuit parameters such as back-emf and synchronous inductance are derived analytically. All analytical results are validated extensively by non-linear finite element (FE) calculations and measurements. The internal angle (${\delta}$) between the back-emf and the phase current is calculated according to the rotor speed by using analytical circuit parameters and the measured power factor because this angle is not measured but estimated in case of sensorless drive of the HSPM motor, significantly affecting torque calculation. Finally, the validity of the torque analysis method proposed in this paper is confirmed, by showing that the torque calculated on the basis of the internal angle is in better agreement with the measurements.

• 전자공학회논문지SC
• /
• 제41권2호
• /
• pp.9-16
• /
• 2004

산업이 발전되어감에 따라 일반 가정에서 산업의 각 분야에 이르기까지 각종 전동기의 사용이 증가하고 있으며, 그 종류도 날로 다양해지고 있다. 이러한 이유로 산업전반에 널리 보급된 인터넷을 이용하여, 가변속 구동 시스템에 대해 원격조작하고, 일괄 관리하거나 실시간으로 관리기기의 상태를 파악하고, 데이터를 수집, 처리하는 것이 요구된다. 또한 인터넷을 통해 기기를 직접 제어, 관리함으로써 시간과 공간, 비용절감의 측면에서 큰 효과를 기대 할 수 있다. 따라서 본 논문에서는 인터넷 웹 기반의 PMSM 원격제어시스템 개발을 연구하였다. 인터넷을 이용한 원격제어를 위해 DSP 제어기 및 TCP/IP를 사용한 클라이언트/서버 시스템과 PMSM의 상태와 Data를 확인할 수 있는 웹 인터페이스를 개발하였다. 이 시스템은 웹 기반의 관리 프로그램을 통해 실시간으로 PMSM의 기동, 정지 및 가변속에 대한 제어와 모니터링이 가능하다.