• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.267-273
• /
• 2015

Recently, a wide range of products incorporating cutting-edge technology are being introduced in various sectors of design. Belkin's WeMo or Phillips' Hue are representative examples. In this context, the color-responsive lighting bookcase is a design product that would satisfy the needs of contemporary consumers who seek entertainment in their purchases. By installing lightings that change color according to the user's behavior, this design reconceptualizes the bookcase as a source of entertainment rather than a mundane object of household furnishing. The lighting apparatus can be detached and reattached, serving as stand-alone equipment. The lighting bookcase is modularized, comprising extensions equipped with MCU (Micro Controller Unit), RGB LED and color sensors. The bookcase as a whole is extendable towards four directions up to nine units with the lighting bookcase at the center. The extended, multiple lighting bookcases are wired to receive power from the main bookcase, and are equipped with RGB LEDs but not with MCUs or color sensors. Receiving power and color signals from the main lighting bookcase, the sub-bookcases feature changing shades of color. Also, it includes IoT(internet of Things). This study is a proposal of a design product, modularized to control the shades of the bookcase lighting using these sensors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.796-801
• /
• 2011

The objective of this work presented here was focused on analysis of development trend for the integrated power system of naval vessels to perform the high-power and energy mission load platform. These mission loads are affected by the high level of military technologies, digitalization of the ocean battlefield, high power sensor system for maximization of the ship survivability. All electric power including propulsion power for ship should be controlled by integrated single system in order to carry various high power density weapon system such as Electromagnetic Aircraft Launch System, Electromagnetic Rail Gun[feasible precision striking at long distance 200NM(370km) or over]. As the analyzing the present state of things, mechanical propulsion system is shifted into hybrid or fully electric propulsion systems to realize integrated power system at the developed countries. Such challenges include reduced dependency on foreign-supplied fossil fuel, increasing demand for installed ship power, controlling life-cycle costs.

• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.125-129
• /
• 2018

In order to develop a smart cultivation facility based on ICT (Information Communication Technology), a cultivation house was selected. Sensor devices were installed to monitor any changes in the cultivation environment. A control panel was constructed to monitor and control the data on environmental changes collected by the sensors. To efficiently manage the proceedings of the cultivation environment, the cultivation process was divided into 4 stages. We designed an environmental control module using these processes. PC and mobile phone software were designed for remote monitoring and control to develop a smart cultivation system that can conveniently manage the cultivation environment and produce mushrooms in a more stable manner.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.601-605
• /
• 2014

Porous conductors are known to demonstrate excellent electrical, mechanical, and chemical resistance. These porous conductors demonstrated potential applications in various fields such as electrodes for supercapacitors, flexible heaters, catalytic electrodes, and sorbents. In this study, we described a pressure sensitive device using conductive and porous sponges. With an extremely simple "dipping and drying" process using a single-walled carbon nanotube (SWCNT) solution, we produced conductive sponges with sheet resistance of < $30k{\Omega}/sq$. These carbon nanotube sponges can be deformed into any shape elastically and repeatedly compressed to large strains without collapse. The pressure sensors developed from these sponges demonstrated high resistance change under pressure of up to a half of their initial resistance.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.69-79
• /
• 1999

The research and implementation was preformed on high-resolution CCTV camera with CCD exclusive DSP conventional analog signal processor CCTV camera has its limit on auto exposure(AE), auto white balance(AWB), back light compensation(BLC) processing, severe distortion and noise of image, manual control parameter setting, etc. In our study, to resolve the problems in conventional CCTV camera, we made it possible to control AE, AWB, BLC automatically by the use of the DSP, which are used exclusively in the CCD camera produced domestically, and the microcontroller. And we utilized the function of screen display of microcontroller for the user-friendly interface to control CCD camera. And the electronic variable resister(EVR) was used to avoid setting parameters manually in the level of manufacturing process. As the result, It became possible to control parameters of the camera by program. And the cost-down effect was accomplished by improving the reliability of parameter values and reducing the efforts in setting parameters.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.233-241
• /
• 2000

This paper presents comparative results of various commonly used anti-stiction methods for polysilicon surface micromachining using identical test structures. Four different types of cantilevers - single cantilevers, cantilevers with dimples, cantilevers with anti-stiction tip, cantilevers with plate - with different widths and lengths were employed as test structures. The detachment length of cantilevers was examined depending on the anti-stiction methods and test structure types. After sacrificial layer was removed, evaporation and sublimation drying methods were used in the drying step when takes place the stiction between structure and substrate. Various final rinsing liquids such as methanol, IPA, and DI water were employed to compare anti-stiction results depending on surface tension and rinsing temperature. For sublimation drying method, methanol was used as an intermediate rinsing liquid. Also, the influence of a stress gradient of the polysilicon was investigated by performing the identical anti-stiction experiments on identical test structures with a stress gradient. In conclusion, sublimation drying method showed superior results to various evaporation drying methods and hence it is considered the best method for releasing polysilicon microstructure in polysilicon surface micromachining.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.153-162
• /
• 2000

Triple points of high purity materials have been used to calibrate primarily the capsule-type platinum resistance thermometer (PRT) in the temperature range of the triple point of equilibrium hydrogen (13.8033 K) and water (273.16 K). In this work, triple points of Ne, $O_2$, Ar, Hg and $H_2O$ except for the triple point of equilibrium hydrogen were realized to establish the International Temperature Scale of 1990 (ITS-90). At each fixed point, two capsule-type PRTs, which were selected for the international comparison, were tested two times. The combined uncertainties of the realization of each triple point were calculated considering the type A and type B evaluation. In Korea Research Institute of Standards and Science, the combined standard uncertainties of the defining triple Points by the ITS-90 were estimated to about 0.18 mK for Ne, 0.14 mK for $O_2$, 0.14 mK for Ar, 0.24 mK for Hg and 0.11 mK for $H_2O$, respectively.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.171-176
• /
• 2000

The physical and electrical characteristics of MgO and Pt thin-films on it, deposited by reactive sputtering and rf magnetron sputtering, respectively, were analyzed with annealing temperature and time by four-point probe, SEM and XRD. Under annealing conditions of $1000^{\circ}C$ and 2 hr, MgO thin-film had the properties of improving Pt adhesion to $SiO_2$ and insulation without chemical reaction to Pt thin-film, and the sheet resistivity and the resistivity of Pt thin-film deposited on it were $0.1288\;{\Omega}/{\square}$ and $12.88\;{\mu}{\Omega}{\cdot}cm$, respectively. We made Pt resistance pattern on $SiO_2$/Si substrate by lift-off method and fabricated thin-film type Pt-RTD(resistance thermometer device) for micro thermal sensors by Pt-wire, Pt-paste and SOG(spin-on-glass). In the temperature range of $25{\sim}400^{\circ}C$, the TCR value of fabricated Pt-RTD with thickness of $1.0{\mu}m$ was $3927\;ppm/^{\circ}C$ close to the Pt bulk value. Resistance values were varied linearly within the range of measurement temperature.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.38-44
• /
• 1999

In this paper, we have constructed a self-diagnostic circuit which could detect erroneous signals in most cases that a eight-beam piezoresistive accelerometer were destroyed more than its one beam. To confirm the function of the circuit, PSPICE simulation was carried out. An IC chip was fabricated with a layout of KA 324 amplifier using a bipolar standard processing. After a package of the chip was sealed using a plastic package with 24 pins, the self-diagnostic characteristics were investigated. Then, the measured self-diagnostic characteristics of the circuit were compared with the PSPICE simulated result.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.34-43
• /
• 2003

In this study, we implemented the measurement of pH, $pO_2$, $pCO_2$ of the arterial blood on a portable blood gas analysis system. This system is consist of two parts of hardware and software. The hardware part is divided into a fluidic mechanism and an electronic circuit unit. The system program is composed of operating, washing, correcting, and measuring routines. Both of 1-point and 2-point calibration schemes were used to enhance the accuracy of the measurement. In order to evaluate the performance of the developed system, we measured and performed statistical analysis on the characteristics of the sensing electrode response. As a result, coefficient variation was within 1.12, and maximum error was within 1.298%. We confirmed development possibility of portable blood gas analyzer.