• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.118-128
• /
• 2017

In this study, we propose a real time inertial navigation system/global positioning system (INS/GPS) integrated smoothing algorithm based on an extended Kalman filter (EKF) and a position damping loop (PDL) for synthetic aperture radar (SAR). Integrated navigation algorithms usually induce discontinuities due to error correction update by the Kalman filter, which are as detrimental to the performance of SAR as the relative position error. The proposed smoothing algorithm suppresses these discontinuities and also reduces the relative position error in real time. An EKF estimates the navigation errors and sensor biases, and all the errors except for the position error are corrected directly and instantly. A PDL activated during SAR operation period imposes damping effects on the position error estimates, where the estimated position error is corrected smoothly and gradually, which contributes to the real time smoothing and small relative position errors. The residual errors are re-estimated by the EKF to maintain the estimation performance and the stability of the overall loop. The performance improvements were confirmed by Monte Carlo simulations. The simulation results showed that the discontinuities were reduced by 99.8% and the relative position error by 48% compared with a conventional EKF without a smoothing loop, thereby satisfying the basic performance requirements for SAR operation. The proposed algorithm may be applicable to low cost SAR systems which use a conventional INS/GPS without changing their hardware configurations.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.71-80
• /
• 2002

This paper suggests the Cardioid beamforming algorithm of the doublet sensors employing DIFAR (directional frequency analysis and recording) sensor signals in the frequency domain. The algorithm enables target bearing estimation using the signals from directional sensors. The algorithm verifies its applicability by successfully estimating bearings of a target projecting ten narrow-band signals in shallow water. The estimated bearings agree very well with those from GPS (global positioning system) data. Assuming the bearings from GPS data to be real values, the estimation errors are analyzed statistically. The histogram of estimation errors in each frequency have Gaussian shape, the mean and standard deviation dropping in the ranges -1.1°∼ 6.7°and 13.3∼43.6°, respectively. Estimation errors are caused by SNR (signal to noise ratio) degradation due to propagation loss between the source and receiver, daily fluctuating geo-magnetic fields, and non-stationary background noises. If multiple DIFAR systems are employed, in addition to bearing, range information could be estimated and finally localization or tracking of a target is possible.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.727-732
• /
• 2008

In this paper, the state-space representation of generalized complimentary filter is proposed. Complementary filter has the suitable structure to merge information from sensors whose frequency regions are complementary. First, the basic concept and structure of complementary filter is introduced. And then the structure of the generalized filter and its state-space representation are proposed. The state-space representation of complementary filter is able to design the complementary filter by applying modern filtering techniques like Kalman filter and $H_{\infty}$ filter. To show the usability of the proposed state-space representation, the design of Inertial Navigation System(INS) vertical channel damping loop using Global Positioning System(GPS) is described. The proposed GPS/INS damping loop lends the structure of Baro/INS(Barometer/INS) vertical channel damping loop that is an application of complementary filter. GPS altitude error has the non-stationary statistics although GPS offers navigation information which is insensitive to time and place. Therefore, $H_{\infty}$ filtering technique is selected for adding robustness to the loop. First, the state-space representation of GPS/INS damping loop is acquired. And next the weighted $H_{\infty}$ norm proposed in order to suitably consider characteristics of sensor errors is used for getting filter gains. Simulation results show that the proposed filter provides better performance than the conventional vertical channel loop design schemes even when error statistics are unknown.

• 한국전자통신학회논문지
• /
• 제6권2호
• /
• pp.304-311
• /
• 2011

최근 관광산업은 높은 성장잠재력을 지닌 미래 유망산업중의 하나로써, 전 세계 많은 나라들은 다양한 관광자원을 개발하여 외국인 관광객을 유치하는데 노력하고 있다. GPS (Global Positioning System)와 RFID (Radio Frequency Identification)와 같은 다양한 기술들을 이용하여 관광산업에 적용하고 있으나, 대부분의 제공되는 분야가 개별 관광객을 위한 현장에서의 콘텐츠 제공 기술로 매우 한정적이었다. 이에 본 논문에서 단체 관광객을 위한 GPS와 ZigBee 기술을 이용한 Intelligent Tour Guide System (ITGS)을 설계, 구현하였다. 이 지능형 관광 가이드 시스템은 단체 관광객들을 위한 시스템으로, 제한된 스케쥴을 최대한 활용하여 관광을 즐길 수 있도록 다양한 기능을 제공한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1494-1499
• /
• 2003

Kinematic calibration is a process whereby the actual values of geometric parameters are estimated so as to minimize the error in absolute positioning. Measuring all components of Cartesian posture, particularly the orientation, can be difficult. With partial pose measurements, all parameters may not be identifiable. This paper proposes a new device that can be used to identify all kinematic parameters with partial pose measurements. Study is performed for a six degree-of-freedom fully parallel Hexa Slide manipulator. The device, however, is general and can be used for other parallel manipulators. The proposed device consists of a link with U joints on both sides and is equipped with a rotary sensor and a biaxial inclinometer. When attached between the base and the mobile platform, the device restricts the end-effector's motion to five degree-of-freedom and can measure position of the end-effector and one of its rotations. Numerical analyses of the identification Jacobian reveal that all parameters are identifiable. Computer simulations show that the identification is robust for the errors in the initial guess and the measurement noise.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.968-974
• /
• 2006

We are moving into the era of ubiquitous computing. Ubiquitous Sensor Network (USN) is a base of such computing paradigm, where recognizing the identification and the position of objects is important. For the object identification, RFID tags are commonly used. For the object positioning, use of sensors such as laser and ultrasonic scanners is popular. Recently, there have been a few attempts to apply RFID technology in robot localization by replacing the sensors with RFID readers to achieve simpler and unified USN settings. However, RFID does not provide enough sensing accuracy for some USN applications such as robot navigation, mainly because of its inaccuracy in distance measurements. In this paper, we describe our approach on achieving accurate navigation using RFID. We solely rely on RFID mechanism for the localization by providing coordinate information through RFID tag installed floors. With the accurate positional information stored in the RFID tag, we complement coordinate errors accumulated during the wheel based robot navigation. We especially focus on how to distribute RFID tags (tag pattern) and how many to place (tag granularity) on the RFID tag-floor. To determine efficient tag granularities and tag patterns, we developed a simulation program. We define the error in navigation and use it to compare the effectiveness of the navigation. We analyze the simulation results to determine the efficient granularities and tag arrangement patterns that can improve the effectiveness of RFID navigation in general.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권10호
• /
• pp.5095-5111
• /
• 2019

A multi-rotor Unmanned Aerial Vehicle (UAV) system is developed to solve the manhole cover detection problem for the infrastructure maintenance in the suburbs of big city. The visible light sensor is employed to collect the ground image data and a series of image processing and machine learning methods are used to detect the manhole cover. First, the image enhancement technique is employed to improve the imaging effect of visible light camera. An imaging environment perception method is used to increase the computation robustness: the blind Image Quality Evaluation Metrics (IQEMs) are used to percept the imaging environment and select the images which have a high imaging definition for the following computation. Because of its excellent processing effect the adaptive Multiple Scale Retinex (MSR) is used to enhance the imaging quality. Second, the Single Shot multi-box Detector (SSD) method is utilized to identify the manhole cover for its stable processing effect. Third, the spatial coordinate of manhole cover is also estimated from the ground image. The practical applications have verified the outdoor environment adaptability of proposed algorithm and the target detection correctness of proposed system. The detection accuracy can reach 99% and the positioning accuracy is about 0.7 meters.

• 반도체디스플레이기술학회지
• /
• 제13권2호
• /
• pp.45-52
• /
• 2014

This paper proposes an efficient photo retrieval system that automatically indexes for searching of relevant images, using a combination of geo-coded information, direction/location of image capture device and content-based visual features. A photo image is labeled with its GPS (Global Positioning System) coordinates and direction of the camera view at the moment of capture, and the label leads to generate a geo-spatial index with three core elements of latitude, longitude and viewing direction. Then, content-based visual features are extracted and combined with the geo-spatial information, for indexing and retrieving the photo images. For user's querying process, the proposed method adopts two steps as a progressive approach, filtering the relevant subset prior to use a content-based ranking function. To evaluate the performance of the proposed scheme, we assess the simulation performance in terms of average precision and F-score, using a natural photo collection. Comparing the proposed approach to retrieve using only visual features, an improvement of 20.8% was observed. The experimental results show that the proposed method exhibited a significant enhancement of around 7.2% in retrieval effectiveness, compared to previous work. These results reveal that a combination of context and content analysis is markedly more efficient and meaningful that using only visual feature for image search.

• 한국화재소방학회논문지
• /
• 제21권4호
• /
• pp.115-122
• /
• 2007

화재와 같은 재난상황에서 피난행동을 돕는 피난유도시스템의 역할은 중요하다. 그러나 기존의 고정식 유도장치는 다양한 상황에 유연하게 대처하지 못한다. 본 연구에서는 피난유도시스템의 역할이 더욱 중요시되는 지하공간에서 실시간으로 화재 및 피난자의 위치를 파악하고 가변식 유도장치를 이용하여 신속하고 효율적인 피난을 가능하게 하는 실시간피난유도시스템을 구상, 설계하고 이를 제작, 설치하여 시험하였다. 또한 점차 대중화되고 있는 유비쿼터스의 기법을 센서간의 연결과 실시간 위치감지에 도입하여 저렴하고 확장성 있는 시스템의 구현을 시도하였다.

• International Journal of Control, Automation, and Systems
• /
• 제2권3호
• /
• pp.279-288
• /
• 2004

This paper presents a novel design for a tubular linear brushless permanent-magnet motor. In this design, the magnets in the moving part are oriented in an NS-NS―SN-SN fashion which leads to higher magnetic force near the like-pole region. An analytical methodology to calculate the motor force and to size the actuator was developed. The linear motor is operated in conjunction with a position sensor, three power amplifiers, and a controller to form a complete solution for controlled precision actuation. Real-time digital controllers enhanced the dynamic performance of the motor, and gain scheduling reduced the effects of a nonlinear dead band. In its current state, the motor has a rise time of 30 ms, a settling time of 60 ms, and 25% overshoot to a 5-mm step command. The motor has a maximum speed of 1.5 m/s and acceleration up to 10 g. It has a 10-cm travel range and 26-N maximum pull-out force. The compact size of the motor suggests it could be used in robotic applications requiring moderate force and precision, such as robotic-gripper positioning or actuation. The moving part of the motor can extend significantly beyond its fixed support base. This reaching ability makes it useful in applications requiring a small, direct-drive actuator, which is required to extend into a spatially constrained environment.