• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.1-10
• /
• 2021

The interest in underwater acoustic sensor networks (UWASNs), along with the rapid development of underwater industries, has increased. To operate UWASNs efficiently, it is important to adopt well-designed medium access control (MAC) protocols that prevent collisions and allow the sharing of resources between nodes efficiently. On the other hand, underwater channels suffer from a narrow bandwidth, long propagation delay, and low data rate, so existing terrestrial node pairing schemes for non orthogonal multiple access (NOMA) cannot be applied directly to underwater environments. Therefore, a multi-dimensional node pairing scheme is proposed to consider the unique underwater channel in UWASNs. Conventional NOMA schemes have considered the channel quality only in node pairing. Unlike previous schemes, the proposed scheme considers the channel gain and many other features, such as node fairness, traffic load, and the age of data packets to find the best node-pair. In addition, the sender employs a list of candidates for node-pairs rather than path loss to reduce the computational complexity. The simulation results showed that the proposed scheme outperforms the conventional scheme by considering the fairness factor with 23.8% increases in throughput, 28% decreases in latency, and 5.7% improvements in fairness at best.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.92-105
• /
• 2015

WBAN (Wireless Body Area Network) is a network which is to consistently monitor body signals with implanted or attached sensor nodes. Especially, nodes that are used in medical services have to operate with low power consumption since they are hard to replace, and have to guarantee high data rate and low transmission delay for consistent signal monitor. In this paper, we propose an algorithm that aims to reduce transmission delay and power consumption, and guarantees stable throughput, by assuming the number of active nodes, and followed by dynamically adjusting the random access period and transmission possibilities in a superframe. The assumed number of active nodes may be incorrect since it only relies on the channel status of a previous superframe. Therefore, we assume the number of active nodes and define a pattern. And revise the number of the active nodes with the defined pattern. To evaluate the performance of the proposed algorithm, we have implemented a WBAN environment with the MATLAB. The simulation results show that the proposed algorithm provides better throughput, low power consumption, and low transmission delay when compared to the slotted ALOHA of the IEEE 802.15.6.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.360-369
• /
• 2007

Since wireless sensor networks consist of nodes with the constrained battery, it is important to construct the topology performing energy-efficient routing while maximizing the whole network lifetime. Previous works related to this do not take into consideration the specific communication pattern in wireless sensor networks. In this paper, we propose a novel routing algorithm, called Up-Down Tree(UDT), which first constructs the tree topology based on distance and then adjusts the transmission range determined by the two different phases, tree setup and data gathering, to adapt the specific communication pattern in wireless sensor networks. Therefore, the UDT can improve energy efficiency, maximize the network lifetime, and block network partition Simulation results show that the UDT has the improved energy efficiency by constructing the optimal topology.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.85-92
• /
• 2010

In this paper, we propose a Clustering-based Cooperative Routing using OFDM (CCRO) for supporting transmission efficiency in mobile wireless sensor networks. The main features and contributions of the proposed method are as follows. First, the clustering method which uses the location information of nodes as underlying infrastructure for supporting stable transmission services efficiently is used. Second, cluster-based cooperative data transmission method is used for improving data transmission and reliability services. Third, OFDM based data transmission method is used for improving data transmission ratio with channel efficiency. Fourth, we consider realistic approach in the view points of the mobile ad-hoc wireless sensor networks while conventional methods just consider fixed sensor network environments. The performance evaluation of the proposed method is performed via simulation using OPNET and theoretical analysis. The results of performance evaluation show improvement of transmission efficiency.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.960-967
• /
• 2012

Wireless sensor network is used at the environment to obtain nearby information and since such information is transferred through wireless link, it causes unnecessary re-sending and disadvantage of big energy consumption at node. Because of this to select reliable, energy effective link, method of estimating quality on wireless link using RSSI(received signal strength indication), LQI(link quality indication), etc is needed on wireless link. To set up path extending survival time by reducing energy consumption of nodes at the wireless sensor network, the thesis selects with small standard deviation of LQI after obtaining LQI within each path. Additionally, LQI standard deviation routing algorithm is compared based on LQI algorithm such as minimum-LQI, hop-LQI weight and RF output -7dBm. According to the outcome, the algorithm suggested has superior characters such as the number of node, retransmission rate and network life span respectively compared to existing algorithm. Therefore, energy consumption can be efficiently reduced in case that LQI standard deviation routing scheme suggested by this paper is adapted to wireless sensor network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7B
• /
• pp.1098-1104
• /
• 2010

Recently, a variety of research of multi-hop routing protocol have been done to balance the sensor node energy consumption of WSN(wireless sensor network) and to improve the node efficiency for extending the life of the entire network. Especially in multi-hop protocol, a variety of models have been concerned to improve energy efficiency and apply in the reality. In multi-hop protocol, we assumption that energy consumption can be adjusted based on the distance between the sensor nodes. However, according to the physical property of the actual WSN, it's hard to establish this assumption. In this dissertation, we propose low-power sub-cluster protocol to improve the energy efficiency based on the spread of distance. Compared with the previous protocols, this proposed protocol can be effectively used in the wireless sensing networks.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.99-110
• /
• 2009

Currently, there are many applications being developed based on sensor network technology. A tracking method for moving objects in sensor network is one of the main issue of this field. There is a little research on this issue, but most of the existing work has two problems. The first problem is a communication overhead for visiting sensor nodes many times to track a moving object. The second problem is an disability for dealing with many moving objects at a time. To resolve the problems, we, in this paper, propose a signature-based tracking method using efficient data aggregation for moving objects, called SigMO-TRK. For this, we first design a local routing hierarchy tree to aggregate moving objects' trajectories efficiently by using a space filtering technique. Secondly, we do the tracking of all trajectories of moving objects by using signature in a efficient way, our approach generates signatures to method. In addition, by extending the SigMO-TRK, we can retrieve the similar trajectories of moving objects for given a query. Finally, by using the TOSSIM simulator, we show that our signature-based tracking method outperforms the existing tracking method in terms of energy efficiency.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.38-50
• /
• 2011

For energy-efficiency in Wireless Sensor Networks (WSNs), when a sensor node detects events, the sensing period for collecting the detailed information is likely to be short. The lifetime of WSNs decreases because communication modules are used excessively on a specific sensor node. To solve this problem, the TARP decentralized network packets to neighbor nodes. It considered the average data transmission rate as well as the data distribution. However, since the existing scheme did not consider the energy consumption of a node in WSNs, its network lifetime is reduced. The proposed scheme considers the remaining amount of energy and the transmission rate on a single node in fitness evaluation. Since the proposed scheme performs an efficient congestion control it extends the network lifetime. The simulation result shows that our scheme enhances the data fairness and improves the network lifetime by about 27% on average over the existing scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.980-992
• /
• 2011

WSN gateway which runs transmission between WSN (Wireless Sensor Network) based on IEEE 802.15.4 and PN (Public Network) based on TCP/IP belongs to core technology of application based on two network. Because WSN Gateway receives various kinds of packet from many sensor nodes in an uncertain time as well as uses hardware's performance enough, it has high level of complexity about software and it is hard to be implemented. To solve these problems, this paper suggests both efficient event detection scheme for identify packet and implementation unit of protocol called 'Transaction'. The results of applying the proposed network framework, complexity of software reduces. And we provide software development environments of reflect various performance requirements.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.291-298
• /
• 2010

In wireless sensor networks, energy is the most important consideration because the lifetime of the sensor node is limited by battery. The clustering is the one of methods used to manage network energy consumption efficiently and LEACH(Low-Energy Adaptive Clustering Hierarchy) is one of the most famous clustering algorithms. LEACH utilizes randomized rotation of cluster-head to evenly distribute the energy load among the sensor nodes in the network. The random selection method of cluster-head does not guarantee the number of cluster-heads produced in each round to be equal to expected optimal value. And, the cluster head in a high-density cluster has an overload condition. In this paper, we proposed both a token based cluster-head selection algorithm for guarantee the number of cluster-heads and a cluster selection algorithm for uniform-density cluster. Through simulation, it is shown that the proposed algorithm improve the network lifetime about 9.3% better than LEACH.