• Journal of the Korean Society for Precision Engineering
• /
• 제33권4호
• /
• pp.309-316
• /
• 2016

In this study, we described the design of a three-axis force/torque sensor for measuring the force and torque in a lower-limb rehabilitation robot. The three-axis force/torque sensor is composed of Fx force sensor, Fz force sensor and Tz torque sensor. The sensing element for Fx force sensor and Tz torque sensor is used in a two-step parallel plate beam, and that of Fz force sensor is used in a parallel plate beam. The rated loads of Fx force sensor, Tz torque sensor and Fz force sensor are 300 N, 15 N m and 100 N, respectively. The three-axis force/torque sensor was designed using the finite element method, and manufactured using strain-gauges. The three-axis force sensor was further characterized. As a result, the interference error of the three-axis force/torque sensor was < 1.24%, the repeatability error of each sensor was < 0.03%, and the non-linearity was < 0.02%.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1369-1379
• /
• 2001

This paper focuses on a development of a sensor system measuring locations of a vehicle to localize a mobile robot while it tracks on the track (location sensor) . Also it focuses on a system configuration identifying the vehicle's orientation and distance from the object while it is stationary at certain station (position sensor) . As for the location sensor it consists of a set of sensors with a combined guiding and counting sensor, and an address-coded sensor to localize the vehicle while moving on the rail. For the position sensor a PSD (Position Sensitive Device) sensor with photo-switches sensor to measure the offset and orientation of the vehicle at each station is introduced. Both sensor systems are integrated with a microprocessor as a data relay to the main computer controlling the vehicle. The location sensor system is developed and its performance for a mobile robot is verified by experiments. The position measuring system is proposed and is robust to the environmental variation. Moreover, the two kinds of sensor systems guarantee a low cost application and high reliability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.826-829
• /
• 1995

The oil-pressure type torque sensor has been adopted in steering system of major automobiles. However, it has been well known that this type of torque sensor needed many subcomponents and produced inaccurate responses. This paper intends to suggest new type of torque sensor based on the shape design by using finite element. A dedicated mesh generation, analysis and post result display program has been developed. As for shape design purpose, the half shape of torque sensor is considered. The result of this study has shown that the design automation for precise torque sensor for control of high velocity rotation shaft can be achieved whithout any expensive investment to the design software.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.317-322
• /
• 1994

The design and performance verification of collocated capacitance sensor system for magnetic bearing is presented. Noncollocation between actuators and sensors may cause unstable rotor behavior. The capacitance sensor is not affected by magnetic field. PCB type capacitance sensor is installed between magnetic bearing polse. so, collocation of sensors and actuators can be achieved. Experiment of sensor's static and dynamic charactistics is conducted. Modeling of the rotor system supported by magnetic bearing is made. And performance comparison between simulation and experiment is showed.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.497-498
• /
• 2007

The most of important thing when we design a Wireless Sensor Network is resources. You have to consider energy efficient operation When you design Wireless Sensor Network. Because Sensor devices have a limited resources. In this paper, we proposed energy efficiency localization technique in Wireless Sensor Network. We used Cell ID technique for location search. This method can reduce power consumption and the network life time will be extension.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제14권1호
• /
• pp.123-131
• /
• 2011

In this paper, modeling and design of a distributed detection system are considered for an active sonar sensor network. The sensor network has a parallel configuration and it consists of a fusion center and a set of receiver nodes. A system with two receiver nodes is considered to investigate a theoretical aspect of design. To be specific, AND rule and OR rule are considered as the fusion rules of the sensor network. For the fusion rules, it is shown that a threshold rule of each sensor node has uniformly most powerful properties. Optimum threshold for each sensor is obtained that maximizes the probability of detection given probability of false alarm. Numerical experiments were also performed to investigate the detection characteristics of a distributed detection system with multiple sensor nodes. The experimental results show how signal strength, false alarm probability, and the distance between nodes in a sensor field affect the system detection performances.

• Journal of Sensor Science and Technology
• /
• 제25권2호
• /
• pp.148-154
• /
• 2016

This paper describes the design and fabrication of a two-axis force/torque sensor and an one-axis force sensor with parallel plate beams(PPSs) for measuring forces and torque in an ankle rehabilitation exercise using by a lower rehabilitation robot. The two-axis force/torque sensor is composed of a Fy force sensor and Tz torque sensor and the force sensor detects x direction force. The two-axis force/torque sensor and one-axis force sensor were designed using by FEM(Finite Element Method), and manufactured using strain-gages. The characteristics experiment of the two-axis force/torque sensor and one-axis force sensor were carried out respectively. As a test results, the interference error of the two-axis force/torque sensor was less than 1.56%, the repeatability error and the non-linearity of the two-axis force/torque sensor were less than 0.03% respectively, and the repeatability error and the non-linearity of the one-axis force sensor were less than 0.03% and 0.02% respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.497-502
• /
• 2002

This paper describes a design methodology of a tri-axial silicon-based farce sensor with square membrane by using micromachining technology (MEMS). The sensor has a maximum farce range of 5 N and a minimum force range of 0.1N in the three-axis directions. A simple beam theory was adopted to design the shape of the micro-force sensor. Also the optimal positions of piezoresistors were determined by the strain distribution obtained from the commercial finite element analysis program, ANSYS. The Wheatstone bridge circuits were designed to consider the sensitivity of the force sensor and its temperature compensation. Finally the process for microfabrication was designed using micromachining technology.

• Journal of Aerospace System Engineering
• /
• 제10권1호
• /
• pp.82-85
• /
• 2016

In this study, structural design of exhaust gas sensor of automobile was performed. In order to evaluate the structural design of the measurement sensor, the structural analysis was performed by the finite element method. The vibration and thermal stress analysis was carried out at the high temperature condition. Finally, the structural test of sensor system was performed, and used for comparison with the analyzed model. Through the structural analysis and test, it is confirmed that the designed measurement sensor structure is acceptable.

• Korean Management Science Review
• /
• 제26권3호
• /
• pp.55-65
• /
• 2009

The objective of this paper is to propose an ant colony optimization (ACO) for clustering design in wireless sensor network problem. This proposed ACO approach is designed to deal with the dynamics of the sensor nodes which can be adaptable to topological changes to any network graph in a time. Long communication distances between sensors and a sink in a sensor network can greatly consume the energy of sensors and reduce the lifetime of a network. We can greatly minimize the total communication distance while minimizing the number of cluster heads using proposed ACO. Simulation results show that our proposed method is very efficient to find the best solutions comparing to the optimal solution using CPLEX in 100, 200, and 400 node sensor networks.