• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.128-134
• /
• 1995

A fiber-optic temperature sensor utilizing an optical absorption device (InP) was fabricated. The spectrum of transmitted light through an InP device was obtained at the three temperatures(249 K, 369 K). A stabilized LED(light emmiting diode) driver, photoreceiver, and signal proocessing electronics were designed. An intensity referencing technique was adopted in order to minimize the fluctuation of output signal due to external pertubation of the transmitting optical fiber. The optical absorption edge of the InP device moves to longer wavelength at a rate of 0.42 nm / K, and energy gap of InP is 1.35 eV at room temperature. From these results, it is concluded that the InP device has temperature dynamic range of 300 K with LED of center wavelength of 940nm and spectral width of 50nm. The designed fiber-optic temperature sensor system showed good linearity within the temperature range from -30$^{\circ}C$ to + 150$^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.956-958
• /
• 1999

We designed and fabricated p-type MOSFETs with floating gate in n-type well lesion and examined their photo characteristics. The fabricated MOBFETs showed a high photo-respsonse characteristics, indicating a possibility as a photo sensor. The structures of MOSFETs were changed as to the number of gate and channel. As the number of channel increased, the induced current by light source s increased. However, the effect of the number of gate was negligble on the photo-response characteristics of the device.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2153-2158
• /
• 2016

Multimedia such as image, audio, and video is easy to create and distribute with the advance of IT. Since novice uses them for illegal purposes, multimedia forensics are required to protect contents and block illegal usage. This paper presents a multimedia forensic algorithm for video to identify the device used for acquiring unknown video files. First, the way to calculate a sensor pattern noise using Wiener filter (W-SPN) is presented, which comes from the imperfection of photon detectors against light. Then, the way to identify the device is explained after estimating W-SPNs from the reference device and the unknown video. For the experiment, 30 devices including DSLR, compact camera, smartphone, and camcorder are tested and analyzed quantitatively. Based on the results, the presented algorithm can achieve the 96.0% identification accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.12-14
• /
• 2021

A sensor registry system (SRS) provides semantic metadata about a sensor based on location information of a mobile device in order to solve a problem of interoperability between a sensor and a device. However, if the GPS of the mobile device is incorrectly received, the SRS receives incorrect sensor information and has a problem in that it cannot connect with the sensor. This paper proposes a dual collaboration strategy based on geographical embedding and LSTM-based path prediction to improve the probability of successful requests between mobile devices and sensors to address this problem and evaluate with the Monte Carlo approach. Through experiments, it was shown that the proposed method can compensate for location abnormalities and is an effective multicasting mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3C
• /
• pp.233-240
• /
• 2012

Unlike traditional factory environment, in an industrial factory network applied wireless sensor network technologies, all procedures of discovery, identification and verification of devices should be performed in an automatic fashion. To address these challenges, we design a management system using the device registry server that we propose in this paper. In the phase of device discovery, the proposed system utilizes properties of routing protocol running in factories. Also, in the phase of identification and verification, the system uses unique and general information of a device stored within the device registration server. Such a way allows management system to reduce implementation complexity and to easily manage devices in a factory applied with a wireless network consisting of heterogeneous devices.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.971-974
• /
• 2005

In this paper, we describe photonic sensor interface in SOPC(System on a programmable chip) platform. This platform uses device that has ARM922T processor and APEX FPGA area on a chip. We use two development kits. The one is embedded kit that using Intel's Xscale device, the another is SOPC kit that using Altera's Excalibur device. We implement some device logic that DMAC, ADCC, etc. and application.

• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1547-1554
• /
• 2008

This paper proposes a fire shunt guidance system model based on rule, it presents suitable shunt route in real-time according to collected fire information of the building inside using wireless sensor networks. So, this system model is composed of the sensor alert module, the behavior suggestion module, and the emergency device control module. The sensor alert module uses rule-base algorithm that monitored the information to collect periodically in wireless sensor networks. And, the behavior suggestion module proposed a suitable behavior, this module supports to judge the fire area with danger sensor list. Additional, the emergency device control module controls a related emergency device according to the suggested behavior and to present on a control screen. We experiment the fire shunt guidance system based on Internet Web for operation verification of the proposed system. Consequently, this study supports people safety with the behavior suggestion according to the context information when an emergency situation happens.

• Journal of Fashion Business
• /
• v.18 no.4
• /
• pp.1-14
• /
• 2014

Currently smart textile market is rapidly expanding and the demand is increasing integration of an electronic fiber circuit. The garments are an attractive platform for wearable device. This is one of the integration techniques, which consists of is the selective introduction of conductive yarns into the fabric through knitting, weaving or embroidering. The aim of this work is to develop a golf bend driven prototype design for an attachable Arduino that can be used to assess elbow motion. The process begins with the development of a wearable device technique that uses conductive yarn and flex sensor for measurement of elbow bending movements. Also this paper describes and discusses resistance value of zigzag embroidery of the conductive yarns on the tensile properties of the fabrics. Furthermore, by forming a circuit using an Arduino and flex sensor the prototype was created with an assistance band for golf posture training. This study provides valuable information to those interested in the future directions of the smart fashion industry.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.32-36
• /
• 2011

We fabricated a sensor for measuring the water level and water temperature using GMR-SV (giant magnetoresistance-spin valve) device, simultaneously. It could be applied to the medical cooling system of the potassium titanylphosphate KTP) laser system for the therapy of a benign prostatic hyperplasia. The middle point of GMR-SV device was set to the near position of a high magnetic sensitivity with 2.8%/Oe. The sensitivity for the water level and water temperature of the fabricated sensor were $400\;m{\Omega}/mm$ and $100\;m{\Omega}/^{\circ}C$, respectively.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.416-422
• /
• 2008

This study was performed to design and construct a digital soil shear stress sensor in order to replace the conventional devices for measuring soil shear property. The developed digital shear stress measuring device can store measured data with GPS position information as a vector format into a computer. Based on the experiments at various field conditions, the measuring characteristic of the device was quite similar to that of a conventional device, SR-2 that has been a major tool to measure the soil shear property. It was concluded that the digital shear stress measuring device was an effective and comprehensive sensor for measuring soil shear property.