• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.241-248
• /
• 2008

민감도 해석은 구조 모델링 변수의 변화에 따른 역학적인 거동의 특성을 찾는 것을 목적으로 한다. 따라서 건물의 구조 진단과 보수 보강 분야에서 특히 중요한 설계 자료로서 활용되고 있다. 본 연구는 구조물의 위상학적 최적 모델링에서 중요하게 다루어지는 민감도 해석을 다양한 방법을 사용하여 공식화하였다. 감차법과 변분법을 적용하여 직접법과 수반법으로서 최종적인 해석적인 민감도 식들을 유도하였다. 구조 해석에 관한 간단한 수치예제를 통하여 유도된 민감도 식들의 해가 적절함을 수치적인 민감도 해석치와 비교하여 검증하였고, 최종적으로 이산화 민감도 해석에 의한 밀도분배법의 위상학적 최적 모델링을 수행하여 민감도 공식들을 위상 최적화 문제에서 정식화하였다.

• Water Engineering Research
• /
• 제6권2호
• /
• pp.73-89
• /
• 2005

Two kinds of high resolution GCMs with the same spatial resolutions but with different schemes run by domestic and foreign agencies are used to clarify the usefulness and sensitivity of GCM for water resources applications for Korea. One is AMIP-II (Atmospheric Model Intercomparison Project-II) type GCM simulation results done by ECMWF (European Centre for Medium-Range Weather Forecasts) and the other one is AMIP-I type GCM simulation results done by METRI (Korean Meteorological Research Institute). Observed mean areal precipitation, temperature, and discharge values on 7 major river basins were used for target variables. Monte Carlo simulation was used to establish the significance of the estimator values. Sensitivity analyses were done in accordance with the proposed ways. Through the various tests, discrimination condition is sensitive for the distribution of the data. Window size is sensitive for the data variation and the area of the basins. Discrimination abilities of each nodal value affects on the correct association. In addition to theses sensitivity analyses results, we also noticed some characteristics of each GCM. For Korean water resources, monthly and small window setting analyses are recommended using GCMs.

• 제어로봇시스템학회논문지
• /
• 제10권4호
• /
• pp.295-303
• /
• 2004

Previously it has been shown that the all pole systems resulting good time responses can be characterized by so called K-polynomial. The polynomial is defined in terms of the principal characteristic ratio $\alpha_1$ and the generalized time constant $\tau$ . In this paper, Part II presents several sensitivity analyses of such systems with respect to $\alpha_1$ and $\tau$ changes. We first deal with the root sensitivity to the perturbation of $\alpha_1$ . By way of determining the unnormalized function sensitivity, both time response sensitivity and frequency response sensitivity are derived. Finally, the root sensitivity relative to $\tau$ change is also analyzed. These results provide some useful insight and background theory when we select of and l to compose a reference model of which denominator is a K-polynomial, which is illustrated by examples.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.1-7
• /
• 2006

Euler and Navier-Stokes flow analyses for helicopter rotor in hover were performed as low and high fidelity analysis models respectively for the future multidisciplinary design optimization(MDO). These design-oriented analyses possess several attributes such as variable complexity, sensitivity-computation capability and modularity which analysis models involved in MDO are recommended to provide with. To realize PC-based analyses for both fidelity models, reduction of flow domain was made by appling farfield boundary condition based on 3-dimensional point sink with simple momentum theory and also periodic boundary condition in the azimuthal direction. Correlations of thrust, torque and their sensitivities between low and high complexity models were tried to evaluate the applicability of these analysis models in MDO process. It was found that the low-fidelity Euler analysis model predicted inaccurate sensitivity derivatives at relatively high angle of attack.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.770-781
• /
• 2008

In nuclear power plants, ferritic low alloy steel components were connected with austenitic stainless steel piping system through alloy 82/182 butt weld. There have been incidents recently where cracking has been observed in the dissimilar metal weld. Alloy 82/182 is susceptible to primary water stress corrosion cracking. Weld-induced residual stress is main factor for crack growth. Therefore exact estimation of residual stress is important for reliable operating. This paper presents residual stress computation performed by 6" safety & relief nozzle. Based on 2 dimensional and 3 dimensional finite element analyses, effect of welding variables on residual stress variation is estimated for sensitivity analysis.

• 한국압력기기공학회 논문집
• /
• 제15권2호
• /
• pp.40-49
• /
• 2019

In this paper, failure probabilities of the OPR1000 reactor vessel under pressurized thermal shock (PTS) were estimated using the probabilistic fracture mechanics code, R-PIE. Input variables of initial crack distribution, crack size, copper contents, and upper shelf toughness were selected for the sensitivity analyses. A wide range of the input data were considered. Through-wall cracking frequencies determined by the product of the vessel failure probability and the corresponding occurrence frequency of the transient were also compared to the acceptance criterion. The results showed that transient history had the most significant impact on the vessel failure probability. Moreover, conservative assumptions resulted in extremely high through-wall cracking frequencies.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.142-154
• /
• 1994

본 논문에서는 정하중을 받는 보강 원통형 쉘의 확률론적 초기결함 민감도 해석을 수행하였다. Donnell의 쉘이론, Galerkin 근사법에 의거 좌굴하중 도출을 위한 다중모드 정식화를 수행하고 이에 random한 기하학적 초기결함의 확률장 이론 및 응답면 기법을 결합하였다. 계산된 확률론적 좌굴하중 결과로부터 신뢰도 지수-하중, 신뢰도 지수-안전계수의 관계를 구할 수 있고 이를 이용하면 요구되는 안전계수의 범위, 허용가능 초기결함의 범위 설정이 가능할 것이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.183-190
• /
• 1993

The seismic response of the reactor structures depends on the dynamic charact-eristics of the structures and the input earthquake loadings. The stuctural integ-rity of the reactor internal components can be verified by the dynamic response analyses to implement the effects of the design loadings like earthquakes. The sensitivity analyses of the dynamic characteristics for the analytical model of reactor structures considering the possible variations of the stiffnesses of the CSB upper flange and the snubber were performed to improve the dynamic characteri-stics of the structures against seismic loading. And to enhance the structural design margin of the reactor internal components the nonlinear time history analyses were attempted for the modified analytical model, and the results were compared between the reference model and the modified ones.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.509-521
• /
• 2021

In this paper, from a review of the size distribution of the bubbles during pool scrubbing obtained from experiments by EPRI, we apply the bubble size distributions to analyses on the decontamination factors of pool scrubbing via I-COSTA (In-Containment Source Term Analysis). We perform sensitivity studies of the bubble size on the various mechanisms of deposition of aerosol particles in pool scrubbing. We also perform sensitivity studies on the size distributions of the bubbles depending on the diameters at the nozzle exit, the molecular weights of non-condensable gases in the carrier gases, and the steam fractions of the carrier gases. We then perform analyses of LACE-ESPANA experiments and compare the numerical ~ results to those from SPARC-90 and experimental results in order to show the effect of the bubble size distributions.

• 한국관개배수논문집
• /
• 제8권2호
• /
• pp.55-63
• /
• 2001

This study was performed to analyse the sensitivity of the Tank model parameters . First of all, the proper values of the parameters which have the least simulation error to the observed data, were estimated. These were used as the standard values which a