• KIEAE Journal
• /
• v.14 no.6
• /
• pp.93-97
• /
• 2014

Curtain wall system of office buildings has recently become very common in Korea. As the multi-layer curtain glazing is exposed to outdoor environment, it is very subjected to direct environmental impact. Consequently, breakage and cracks of glazing due to heat expansion is frequently observed. This study explores various causes and aspects for destruction of multi-layer glazing. A sensitivity analysis was performed on the basis that thermal changes causes damage to the multi-layer glazing. Air temperature in air cavity within the multi-layer glazing was examined to find its effect on multi-layer glazing breakage. Analysis showed high deflection to depth ratio of 1:1.8 and that higher the aspect ratio, smaller is the deflection. Allowable pressure showed that the weakest value is for aspect ratio of 1:2.9. Sensitivity analysis by the area of the glazing showed that as area of glazing becomes higher, allowable pressure and deflection-depth ratio becomes smaller. For allowable pressure and allowable deflection-depth within air cavity, the glazing breakage occurred at least $107^{\circ}C$. The results from glazing breakage by thermal factor shows that it is hard to break the glazing with only an increase in air cavity temperature in multi-layer glazing applied in buildings.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.295-303
• /
• 2004

Previously it has been shown that the all pole systems resulting good time responses can be characterized by so called K-polynomial. The polynomial is defined in terms of the principal characteristic ratio $\alpha_1$ and the generalized time constant $\tau$ . In this paper, Part II presents several sensitivity analyses of such systems with respect to $\alpha_1$ and $\tau$ changes. We first deal with the root sensitivity to the perturbation of $\alpha_1$ . By way of determining the unnormalized function sensitivity, both time response sensitivity and frequency response sensitivity are derived. Finally, the root sensitivity relative to $\tau$ change is also analyzed. These results provide some useful insight and background theory when we select of and l to compose a reference model of which denominator is a K-polynomial, which is illustrated by examples.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.2
• /
• pp.278-287
• /
• 2007

Since traffic congestion ratio at any given port fluctuates on the number of arriving and departing vessels, the total tonnage of freight volume being handled, and the number of berth in operation and other factors, there exists a need to numerically analyze the waterway traffic volume. However, there are no effective regulations in regards to the waterway traffic analysis prior to expansion of a port facility. The current analysis requires the traffic analysis in relation only to the width of the waterway, which clearly falls short of achieving a comprehensive evaluation study that could be used in consideration of port expansion.This study provides five scenarios to execute a comprehensive evaluation study and base for the sensitivity study by analyzing the scenarios. As a result of the sensitivity analysis, the A, B, and C scenarios varies the average arrival ratio of the berth shows 1.1, 1.19, and 1.28 times of delays respectively. Also, The D and E scenarios take place malfunctions of pier shows 1.21 and 1.53 times of delays respectively. Therefore, various strategies of harbor development and method of harbor management are needed for the flexible correspondence to the environmental changes such as the excessive increasing of the freight volume and often taking place of malfunctioning.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.3-7
• /
• 2000

This paper is on the sensitivity characteristics of a concentric composite mandrel type fiber optic acoustic sensor with inclusion of an air cavity With the finite element method, we have analyzed sensitivity variation of the sensor in relation to its geometrical factors such as thickness of the air cavity, thickness of the foaming layer, and the ratio of inner diameter/outer diameter of the mandrel. Results of the analysis suggest a thicker air cavity, a thinner foaming layer, and a smaller ratio of the inner diameter/outer diameter of the mandrel to be desirable for higher sensitivity. The sensor structure designed with the above rules provides the sensitivity of about 0.8dB higher than that of a normal concentric composite mandrel sensor without the inherent air cavity.

• Korea-Australia Rheology Journal
• /
• v.15 no.2
• /
• pp.91-96
• /
• 2003

The sensitivity of the product to the ongoing sinusoidal disturbances of the process has been investigated in the film casting of viscoelastic polymer fluids using frequency response analysis. As demonstrated for fiber spinning process (Jung et al., 2002; Devereux and Denn, 1994), this frequency response analysis is useful for examining the process sensitivity and the stability of extensional deformation processes including film casting. The results of the present study reveal that the amplification ratios or gains of the process/product variables such as the cross-sectional area at the take-up to disturbances exhibit resonant peaks along the frequency regime as expected for the systems having hyperbolic characteristics with spilt boundary conditions (Friedly, 1972). The effects on the sensitivity results of two important parameters of film casting, i.e., the fluid viscoelasticity and the aspect ratio of the casting equipment have been scrutinized. It turns out that depending on the extension thinning or thickening nature of the fluid, increasing viscoelasticity results in enlargement or reduction of the sensitivity, respectively. As regards the aspect ratio, it has been found that an optimum value exists making the system least sensitive. The present study also confirms that the frequency response method produces results that corroborate well those by other methods like linear stability Analysis and transient solutions response. (Iyengar and Co, 1996; Silagy et al., 1996; Lee and Hyun, 2001).

• Journal of the Korean Dietetic Association
• /
• v.6 no.1
• /
• pp.33-43
• /
• 2000

Environmental pressures from such sources an economic condition, the government and inter-institutional competition create managerial challenges. Economic pressures may be forcing dietetic dept, in hospital to utilize cost∙benefit analysis to assist them in their problem solving. Cost∙benefit analysis have been widely used in business, industry and many other fields with only limited application to foodservice. Due to the lack or this information the purposes of this study were to identify use of cost∙benefit analysis in hospital foodservice system to evaluate the economic efficiency of alternatives, and to make recommendation for operation system change. Using the cost∙benefit method, cash flows are separated into cost and benefits. For an alternative to be selected, indicators, such as NPV, benefit-cost ratio (B/C ratio) with 5% discount rate per annum. The sensitivity analysis was also conducted with difference rate 3%, 7% respectively and reduced employee payroll change. The result of this study can be summarized as follows : 1. The total cost of investment for operation system change was 390,570 thousand won and the total benefit through operation system change was 865,808 thousand won. 2. Net present value(NPV) for 5 years was 475,239 thousand won and benefit-cost ratio was 2.22. 3. In sensitivity analysis with different discount rate 3%, 7%, benefit-cost ratio was 2.25, 2.18 respectively, with total reduced employee payroll change, benefit-cost ratio was 2.86. In conclusion, total benefits were exceeded total costs. Therefore, the project of operation system change in hospital foodservice was found to be economically efficient.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.186-189
• /
• 2004

Sensor used by semiconductor process produced an MAP sensor and applied to several industry. Among those sensors divided as transducer which convert physical quantity into electrical value, piezoresistive type sensor has been studied for the properties and sensitivity of piezoresistor. In this paper, the variation of seismic mass which have been functioned as actuator moving the cantilever beam analyzed the effect on distribution of resistance change ratio and supposed the optimal shape and position of piezoresistor. The resulting are following; According to the increment of seismic mass size, the value of resistance change ratio decreased caused by improve the stiffness. Y directional piezoresistor is formed in spot of 100 m apart from cantilever edge and length of that is 800$\mu$m. To increase the sensitivity, piezoresistor is made as n-type and x-direction.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.343-348
• /
• 2008

This study was carried out to commercialize FTTH by developing a burst mode optical receiver for E-PON. The optical receiver was manufactured by minimizing the capacitance of a photodiode to improve sensitivity for meeting 10, 20 km OLT Rx standard of E-PON at the transmission speed of 1.25 Gb/s. When bit-error ratio is $10^{-12}$ and PRBS is $2^5-1$, sensitivity is -26 dBm, loud/soft ratio is 23 dB. Both preamble time and guard time were set to 102.4 ns (128 bit). After comparing a photodiode whose capacitance is 0.53 pF with another photodiode whose capacitance has been minimized to 0.26 pF, we could see that sensitivity improved to 0.7 dBm and so did bandwidth to 190 MHz of burst mode for the optical receiver manufactured by the photodiode whose capacitance is 0.26 pF.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.236-240
• /
• 2016

The purpose of this study is to propose a novel high sensitivity neuro-PET design. The improvement of sensitivity in neuro-PET is important because it can reduce scan time and/or radiation dose. In this study, we proposed a novel PET detector design that combined conical shape detector with cylindrical one to obtain high sensitivity. The sensitivity as a function of the oblique angle and the ratio of the conical to cylindrical portion was estimated to optimize the design of brain PET using Monte Carlo simulation tool, GATE. An axial sensitivity and misplacement rate by penetration of ${\gamma}$ rays were also estimated to evaluate the performance of the proposed PET. The sensitivity was improved by 36% at the center of axial FOV. This value was similar to the calculated value. The misplacement rate of conical shaped PET was about 5% higher than the conventional PET. The results of this study demonstrated the conical detector proposed in this study could provide subsequent improvement in sensitivity which could allow to design high sensitivity PET for brain imaging.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.6
• /
• pp.1403-1409
• /
• 2008

The purpose of this study is to develop the systematic process on the discrimination of Sasang constitution with the pulse diagnosis apparatus. The pulse waves were acquired at the right and the left Guan point with 1420 people who were apparently healthy. In order to minimize the effect of aging on the shape of pulse wave, the age groups of 30s, 40s, and 50s were used. Taeum group was the best to classify, Soyang group was the worst. With the same group size, the sensitivity of Soyang group was increased. Input variables were selected with the consideration of the floating-sink ratio, tests of equality of group means, multiple comparison, multicollinearity, and structure matrix. To increase the sensitivity of Soyang, the variables which could tell the difference between Soyang and Soeum were selected.