• 한국수자원학회논문집
• /
• 제31권3호
• /
• pp.243-252
• /
• 1998

본 연구에서는 새로운 무차원값을 제시하여 도시유출모형의 매개변수결정을 위한 상대적인 민감도분석을 실시하여 매개변수별 민감도특성을 구명하였다. 민감도분석을 위한 무차원값으로 총유출량비,첨두유출량비, 유출민감도비, 민감도비율을 다음과 같이 개발하였다. $$ 유역면적의 크기와 강우분포형과 강우지속기간별로 각 적용단계별 총유출량비, 첨두유출량비, 유출민감도를 산정하기 위해 ILLUDAS모형과 SWMM모형의 매개변수를 선저하고 적정 적용범위를 결정하였다.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1207-1222
• /
• 2004

In this paper, the explicit equations on the power consumption and sensitivity ratio of VCM-type actuator for disk drive are proposed. The power consumption and sensitivity ratio is derived in frequency domain. The power consumption during the track following of the actuator can be described well in frequency domain and it can be used to calculate the total power dissipation of the actuator which is needed to compensate the tracking and focusing errors. Also, the sensitivity ratio of an actuator is derived by using the reference servo of a disk drive and will be used to optimally obtain the performances of the actuator. This sensitivity ratio can persuasively explain the basis of the target performances of the actuator in the considerations of the reference servo. The usefulness of the proposed equations for the sensitivity ratio and power consumption of an actuator is shown by a lot of simulations. In the near future, we will verify the simulation results by experiments.

• 상하수도학회지
• /
• 제18권6호
• /
• pp.748-757
• /
• 2004

In this study, we analyzed the sensitivity of parameters which affect the result of ILLUDAS model, in the various rainfall conditions. The three basins including Namgaja, Kings creek, Gray haven were selected for this research. The rainfall conditions are considered in terms of the rainfall frequency, the duration and the distribution. In most cases, the impermeability area ratio, the sewer slope, and the sewer roughness coefficient give more significant effects on the results than others. The results show that as increasing the rainfall frequency, the sensitivity of the parameters, sewer slope and roughness coefficient are rised, while the impermeability area ratio is decreasing. And also, for the duration of rainfall, the impermeability area ratio's sensitivity shows similar tendency. In case of the rainfall distribution, the parameters of the sewer roughness and the impermeability area ratio show more sensitive in Huff distribution. Especially, The impermeability area ratio is the most sensitive parameter in Central blocking and Yen & Chow distributions respectively.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.50-55
• /
• 2022

Acceleration performance, maximum velocity, urban driving energy consumption, and high-way driving energy consumption are important characteristics of electric vehicle driving. This study analyzes the effect of a gear ratio on these characteristics for a front wheel drive electric vehicle. The normalized sensitivity metric is used to compare the sensitivity of these scaled characteristics to the changes in the gear ratio. The sensitivity analysis results show that the normalized values are 0.95 for maximum velocity, 0.91 for acceleration performance, 0.51 for urban driving energy consumption, and 0.24 for high-way driving energy consumption. Therefore, the maximum velocity was affected the most by the changes in the gear ratio. These results can be used to determine the gear ratio of a front wheel drive electric vehicle to optimize the driving characteristics simultaneously.

• 한국수자원학회논문집
• /
• 제31권3호
• /
• pp.253-267
• /
• 1998

본 연구에서는 유역의 크기와 형상 및 도시화 정도가 다른 동수천유역과 무심천의 청주 시험유역, 두 곳을 대상으로 ILLUDAS 모형과 SWMM 모형을 적용한 유출특성을 바탕으로 각 매개변수의 민간도 정도를 분석하였다. 총 유출량비는 선정 매개변수 대부분 강우지속기간과 유역면적크기에 따라서 일정한 관계가 있는 것으로 분석되었으며 강우의 시간적 분포형변화에는 관계성이 약한 것으로 분석되었다. 첨두유출량비는 ILLUDAS 모형에서는 침투능과 매개변수 모두 일정한 관계성을 갖고 선형변화하는 것으로 분석되었다. 유출민감도비는 1 이하의 값을 유지하는 것으로 나타나 첨두유출량보다 총유출량에 대한 민감도 영향이 더 큰 것으로 분석되었고, SWMM 모형의 조도계수 유출민감도비는 거의 1의 값을 갖는 것으로 분석되었다. 적용모형에서 선정된 주요 매개변수에 대해 유역면적크기별, 60,120,180분 강우지속기간별과 Huff의 4분위형별로 총유출량비, 첨두유출량비, 유출민감도비를 산정하여 도시적인 방법으로 분석하였고 민감도비율 결과를 표로 제시하였다.

• Nutrition Research and Practice
• /
• 제12권5호
• /
• pp.443-448
• /
• 2018

BACKGROUND/OBJECTIVES: This study was conducted to investigate the effects of sodium-potassium ratio on insulin resistance and sensitivity in Korean adults. SUBJECTS/METHODS: Subjects were 3,722 adults (1,632 men and 2,090 women) aged 40-69 years participating in the Korean genome and epidemiology study_Ansan and Ansung study. Insulin resistance was assessed using homeostasis model assessment of insulin resistance (HoMA-IR) and fasting insulin, and insulin sensitivity was assessed by using the quantitative insulin sensitivity check index (QUICKI). The 24-h urinary sodium and potassium excretion were estimated from spot urinary samples using the Tanaka formula. The generalized linear model was applied to determine the association between urinary sodium-potassium ratio and insulin resistance. RESULTS: HoMA-IR (P-value = 0.029, P-trend = 0.008) and fasting insulin (P-value = 0.017, P-trend = 0.005) levels were positively associated with 24-h estimated urinary sodium-potassium ratio in the multivariable model. QUICKI was inversely associated with 24-h estimated urinary sodium-potassium ratio in all models (P-value = 0.0002, P-trend < 0.0001 in the multivariate model). CONCLUSION: The present study suggests that high sodium-potassium ratio is related to high insulin resistance and low insulin sensitivity. Decreasing sodium intake and increasing potassium intake are important for maintaining insulin sensitivity. Further studies are needed to confirm these findings in longitudinal studies.

• 대한기계학회논문집
• /
• 제19권10호
• /
• pp.2678-2689
• /
• 1995

In this study, a new hot-wire anemometer which has greater sensitivity than that of a constant temperature anemometer (CTA) was proposed. In contrast to CTA, the wire working resistance of the new anemometer increases with flow velocity, that is, the operating mode of the wire becomes variable temperature. The variable temperature anemometer(VTA) was made by substituting a voltage controlled variable resistor such as photoconductive cell or transistor for one of the resistors in the bridge. By positively feeding back the bridge top signal to the input side of these electronic components, the wire overheat ratio could be increased with velocity automatically. Static response analyses of the VTA, constant voltage anemometer (CVA) and CTA were made in detail and calibration experiments were performed to validate the proposed operating principle. The wire operating resistance of the CVA decreases with velocity and this leads to lower sensitivity than that of a CTA. But the sensitivity of the newly proposed VTA is superior to that of a CTA, since the wire overheat ratio increases with velocity. Consequently, it is found that the major factor that is responsible for large sensitivity of a VTA is not the working resistance itself but the change of the wire working resistance with velocity.

• Nutrition Research and Practice
• /
• 제5권1호
• /
• pp.40-45
• /
• 2011

Hemoglobin and zinc protoporphyrin (ZPP) tests are commonly used to screen for iron deficiency, but little research has been done to systematically evaluate the sensitivity and specificity of these two tests. The goal of this study was to evaluate the effectiveness of zinc protoporphyrin/heme (ZPP/H) ratio as a point-of-service screening test for iron deficiency among preschool-aged children by comparing the sensitivity and specificity of hemoglobin, ZPP/H ratio, and serum ferritin (SF). Also completed were assessments for the prevalence of anemia, iron deficiency (ID), and iron deficiency anemia (IDA) with indicators of ferritin models. This study was carried out with 95 children ages 3 to 6 y. Anthropometric measurements were assessed and blood samples were analyzed for hemoglobin, SF, transferrin saturation (TS), and ZPP. Anemia was common and the prevalences of anemia, ID, and IDA were 14.7%, 12.6%, and 5.2%, respectively. The ZPP/H ratio was strongly and significantly correlated with hemoglobin. And ZPP/H ratio was a more sensitive test for ID than hemoglobin or SF measurement, correctly identifying more than twice as many iron-deficient children (sensitivity of 91.7%, compared to 41.7% for hemoglobin and SF). However, ZPP/H ratio had lower specificity (60.2%, compared to 89.1% for hemoglobin or 96.4% for SF) and resulted in the false identification of more subjects who actually were not iron deficient than did hemoglobin or SF. Low hemoglobin concentration is a late-stage indicator of ID, but ZPP/H ratio can detect ID at early stages and can be performed easily at a relatively low cost. Therefore, ZPP/H ratio can serve as a potential screening test for pre-anemic iron deficiency in community pediatric practices.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.418-422
• /
• 2001

To achieve a high performance in direct vector control of induction motor, it is essential to correct estimation of rotor flux. The accuracy of flux observers for induction machines inherently depends on parameter sensitivity. This paper presents an analysis method for conventional flux observers using Parameter Sensitivity. The Parameter sensitivity is defined as the ratio of the percentage change in the system transfer function to the percentage change of the parameter variation. We define the ratio between real flux and estimated flux as the transfer function, and analyzed a parameter sensitivity of this transfer function by simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1176-1178
• /
• 2001

To obtain a high performance in a direct vector controlled induction machine, it is essential to correct estimation of rotor flux. The accuracy of flux observers for induction machines inherently depends on parameter sensitivity. This paper presents an analysis method for conventional flux observers using parameter Sensitivity. The Parameter sensitivity is defined as the ratio of the percentage change in the system transfer function to the percentage change of the parameter variation. We define the ratio between real flux and estimated flux as the transfer function, and analyzed a parameter sensitivity of this transfer function.