• Journal of the military operations research society of Korea
• /
• v.24 no.1
• /
• pp.176-188
• /
• 1998

In this paper, it is identified that the optimal level of each performance measures (service and inventory level) is not sensitive to an uncertain environment under JIT Kanban system designed by Moeeni. Moreover, it is proposed that the optimal design method considering multiple performance characteristics is the optimal level decision method according to the relative importance differences of each performance when there exist multiple performance characteristics. The result from the simulation analysis shows that the number of Kanban for stage 3 (final process) and stage 2 is increased at the service level. It is found that the expected loss is minimal when the cycle time decreases and the container size increases. However, the stage 1 is not affected by the number and cycle time of Kanban. It is thus important to consider carefully the cycle time and the container size of the Kanban to satisfy the demand in right time. In case of inventory level, the working inventory level decreases when the container size is decreased and the working inventory level also decreases slightly when the cycle time of the Kankban is increased in stage 1 and 2.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.213-224
• /
• 2019

There is an increasing frequency in the occurrence of abnormal weather phenomena such as sharp increases and decreases in temperature. Under these weather conditions, the heading time of rice changes unexpectedly, which poses problems in agriculture. Therefore, we investigated the effect of temperature on the heading response at different growth stages in rice. During the period from transplanting to heading, the plants were subjected to different temperature treatments, each for a 9-day period, to observe the heading response. For the heading date analysis, "heading date" was defined as the number of days from transplanting to the appearance of the first spikelet. We found that the influence of temperature increased in the order of rooting stage, followed by meiosis, early tillering, spikelet differentiation, and panicle initiation stage in all ecological types and cultivars. In particular, unlike the results reported previously, the effect of temperature on heading during the photo-sensitive period was very small. Meanwhile, the influence of temperature on vegetative growth response at different growth stages was not consistent with heading response. These results can be used as basic data for predicting the variation in heading date owing to temperature variation at each growth stage. In addition, we propose that the concept of day length should be included in determining the influence of temperature on the photo-sensitive period.

• Child Health Nursing Research
• /
• v.8 no.1
• /
• pp.44-54
• /
• 2002

The main purpose of this methodological study was to develop an assessment tool and intervention protocol for child and family with childhood cancer at early diagnosis stage. The assessment tool and intervention protocol was developed by extensive literature review and consultation with experts. Review of nine domestic and sixty-six international journal articles were done to identify stress, interventions, coping strategies and adjustment of children with cancer and their family. Results were as follows; First, assessment at the early diagnosis stage need to include information on patient, family, and patient/family attitude toward diagnosis and treatment. Second, intervention protocol for children with cancer includes control physical symptoms, manage the side effects of chemotherapy and diagnostic or therapeutic procedures, control emotional responses, provide support and information, assist decision-making and adjust to environment. Third, intervention protocol for family includes controlling emotional responses, provision of informations, inducing family support to patient, improving family cohesion, supporting siblings and supporting spiritual growth. In conclusion, the early diagnosis stage in cancer treatment is important for child and family since this stage greatly affects the overall adjustment of child and family to live with cancer. Therefore, pediatric nurses need to be sensitive to the need of patient/family and systematically manage their needs at this stage.

• The Korean Journal of Applied Statistics
• /
• v.19 no.1
• /
• pp.69-80
• /
• 2006

In this study, we make an effort to find a method to acquire sensitive information when sensitive populations are consisted of several clusters that vary in size. We suggest and systemize the theoretical validity for applying RRT(Randomized Response Technique) to PPS(Probability Proportional to Size) sampling method and derive the estimate and it's variance of the proportion of sensitive characteristic of population by using the suggested method. We compare the efficiency of the suggested technique by two-stage equal probability sampling. We examine practical aspects of the suggested method of RRT by PPS sampling through field survey.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.314-327
• /
• 2015

20th century, beginning of modern, the style of art and design, separated reasonable and sensitive code. Art form including cubism, constructivism, futurism and different form including fauvism, expressionism, surrealism and abstract expressionism coexist two code in early modern. But the style of design was separated each period with geometric and organic form, reasonable and sensitive code. Replacement timing on two design style was the transition period of the production-oriented step to the sale-oriented step in marketing. In early stage modern it was stable production-oriented step. Geometric style include G. Rietvevld (Red and Blue chair), M. Breuer (Wassily chair), Fanizon and Martinelli (I-Ching) was simple and functional, received the absolute support. An aggressive demand generation and sales promotion for the design change was needed so that excess supply in the market with a stable production. In sale-oriented step for sales promotion in mid modernism, it was accepted transitions to the sensual organic volume with elegant and sleek style include C. Eames (LCW chair), V. Panton (Panton chair) and C. Mollino (Arabesco Tea table).

• Corrosion Science and Technology
• /
• v.12 no.3
• /
• pp.149-157
• /
• 2013

In corrosion-sensitive areas of exsisting unpainted weathering steel bridges with closed box girder structures. there are some serious local corrosion problems because of rain water or dew water which can not be solved by exsisting maintenance methods. These problems must be controled technically because of bad. influence on the safety of bridge. This study is the first stage of developing the economic corrosion control manual for these local corrosion problems. Through the injection of tar sealant into the crevice of mock-up equipment, it was prooved that the corrosive sealant can be useful to corrosion control at crevice of corrosion sensitive area.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.486-494
• /
• 2021

Watermelon (Citrullus lanatus (Thunb.) Matsum. & Nakai) is sensitive to low temperature and shows retarded growth under 10℃. Although early transplanting guarantees higher returns, it requires cost and labor to maintain the appropriate temperature for plant growth. Therefore, cultivars tolerant to chilling stress is necessary to reduce the cost and labor requirements. The purpose of this study is to analyze data on plant growth and fruit enlargement under continuous chilling night temperature to develop new cultivars tolerant to chilling temperature. Two cultivars expected to have chilling tolerance and another cultivar sensitive to chilling temperature were grown in greenhouses with chilling and optimal night temperature conditions. In the early growth stage after transplanting, the cultivars expected to have chilling tolerance showed better vine length, fresh weight and dry weight. However, one of the tolerant cultivars showed significantly lower vine length, leaf length and width, and petiole length than the sensitive cultivar during pollination period and later growth stage, showing genotype specific responses. The fruit length, width, and weight were also significantly lower in the tolerant cultivar. The fruit set ratio was significantly higher in the chilling sensitive cultivar than the two tolerant cultivars. These results suggest that the present chilling tolerant cultivars in watermelon were selected based on their performance in the early growth stage, and further studies on chilling tolerance in different growth and development stages are required to develop cultivars adapted to various forcing cultivation systems.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.229-229
• /
• 2022

Rapeseed is a crop that is waterlogging sensitive, and it is necessary to breed waterlogging tolerance varieties. Our study presents the comparative transcriptome changes in two rapeseed lines, i.e., waterlogging-tolerant (tJ8634-B-30,) and - sensitive ('EMS26') lines under control and waterlogging stress treatments at the flowering stage. RNA-sequencing analysis revealed 13,279 differentially expressed genes (DEGs) for 'J8634-B-30' and 8,682 DEGs for 'EMS26' under waterlogging stress condition compared to control. Among DEGs of 'J8634-B-30', 6,818 were up-regulated and 6,461 were down-regulated. On the other hand, among the DEGs of 'EMS26', the number of down-regulated genes (5,240) were higher than that of up-regulated genes (3,442). Gene ontology enrichment analysis showed that DEGs related to glucan metabolic, cell wall, and oxidoreductase activity were significantly changed in 'J8634-B-30'. Kyoto Encyclopedia of Genes and Genomes (KEGG)-based analysis in 'J8634-B-30' identified up-regulated DEGs being involved in MAPK signaling pathways. In addition, the DEGs belonging to mechanisms responding to waterlogging stress, i.e., plant hormones, carbon metabolism, Reactive oxygen species (ROS), Nitric oxide (NO) etc. were compared in rapeseed lines. Several DEGs including ethylene-responsive transcription factor (ERF), constitutive triple response (CTR) (in ethylene signaling pathway), monodehydroascorbate Reductase (MDAR), NADPH oxidase (in ROS pathway), cytochrome c oxidase assembly protein (COX) (in NO pathway) up-regulated in 'J8634-B-30'. These outcomes provided the valuable information for further exploring the genetic mechanism of waterlogging tolerance in rapeseed.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.623-635
• /
• 2018

In order to study the mechanical behavior of shield tunnel segments during assembly stage, the in-situ tests and FDM numerical simulation were conducted based on the Foguan Shiziyang Tunnel with large cross-section. Analysis for the load state of the assembling segments in different assembly steps as well as the investigation for the changing of inner forces and longitudinal stress of segments with assembling steps were carried out in this paper. By comparing the tested results with the simulated results, the conclusions and suggestions could be drawn as follows: (1) It is the most significant for the effects on axial force and bending moment caused by the assembly of adjacent segment, followed by the insertion of key segment while the effects in the other assembly steps are relative smaller. With the increasing value of axial force, the negative bending moment turns into positive and remains increasing in most monitored sections, while the bending moment of segment B1and B6 are negative and keeping increasing; (2) The closer the monitored section to the adjacent segments or the key segment, the more significant the internal forces response, and the monitored effects of key segment insertion are more obvious than that of calculation; (3) The axial forces are all in compression during assembling and the monitored values are about 1.5~1.75 times larger than the calculated values, and the monitored values of bending moment are about 2 times the numerical calculation. The bending moment is more sensitive to the segments assembly process compared with axial force, and it will result in the large bending moment of segments during assembling when the construction parameters are not suitable or the assembly error is too large. However, the internal forces in assembly stage are less than those in normal service stage; (4) The distribution of longitudinal stress has strong influence on the changing of the internal forces. The segment side surface and intrados in the middle of two adjacent jacks are the crack-sensitive positions in the early assembly stage, and subsequently segment corners far away from the jacks become the crack-sensitive parts either.

• The Korean Journal of Applied Statistics
• /
• v.25 no.3
• /
• pp.447-456
• /
• 2012

For a sensitive survey in which the population is comprised of several clusters with a quantitative attribute, we present an additive quantitative randomized response model by cluster sampling that adapts a two-stage cluster sampling instead of a simple random sample based on Himmelfarb-Edgell's additive quantitative attribute model and Gjestvang-Singh's one. We also derive optimum values for the number of 1st stage clusters and the optimum values of observation units in a 2nd stage cluster under the condition of minimizing the variance given constant cost. We can see that Himmelfarb-Edgell's model is more efficient than Gjestvang-Singh's model under the condition of cluster sampling.