• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.164-170
• /
• 2019

The absorption and release capacities, survival efficiency, and recovery rates of five kinds of transport media were evaluated based on the swab elution method (Quantitative) of CLSI (Clinical and Laboratory Standards Institute) M40-A2. Liquid media showed mostly better results than semi-solid media in the three evaluations. The flocked swabs had better ability to absorption and discharge bacteria than the standard swabs. The liquid medium (S4) had the best survival efficiency. Pneumococcal strains with poor growth had a higher survival efficiency and recovery rate in liquid media (S4, S5). The results of microbial recovery showed that S. pyogenes met all the CLSI standards in all media. S. pneumoniae was inadequate in the semi- solid media (S2, S3) and all the remaining media met the criteria. H. influenzae was unsuitable in semi-solid media (S1, S3) and met the criteria in semi-solid medium (S2) and liquid medium (S4, S5). The viability of the H. influenzae, pneumococcal strain causing respiratory disease, was poor in most media. Overgrowth of P. aeruginosa was observed at room temperature. The combination of liquid medium and flocked swab confirmed the best results in the three evaluation methods.

• Journal of Plant Biology
• /
• v.32 no.4
• /
• pp.313-322
• /
• 1989

A system was established for induction of multi-shoots and plant regeneration from mesophyll protoplasts of alfalfa, Medicago sativa L. cv. Vernal. Different hormonal effects were tested at each step of protoplast culture, i.e. cell division in modified Kao's liquid medium (K566-7). calli formation on SH semi solid medium, and multi-shoot regeneration from calli on SHa and SHb solid media. Frequency of multi-shoots and plant regeneration was affected by various combinations of phytohormones in final step. The evaluation of multi-shoots induction systems via protoplast culture was discused.

• Plant Resources
• /
• v.6 no.2
• /
• pp.153-158
• /
• 2003

Effects of shaking, medium consistency and anther density on polyhaploid production in two wheat cultivars, Pavon and Chris, were studied using a modified 85D12 medium. Pavon produced more calli in shaking and more albino plants tban Chris. However, Chris produced threefold more green plants than Pavon in non-shaking treatment. More calli and green plants were derived from non-shaking treatment than those from shaking treatment. Anthers were cultured on both liquid and semi-solid 85D12 media, using two anther densities, 48 and 96 anthers per plate. Although Pavon generally produced more calli and albino plants than Chris, Chris produced more green plants than Pavon. More green plants were derived from semi-solid medium than those from liquid medium. A factor that may affect plant regeneration from anthers is the length of time on initiation medium. Most of the calli for both genotypes were transferred during the first two time periods. Fertility, as measured by seed set, was determined for all surviving regenerated plants. About 24% of Chris and Pavon anther-derived green plants in the experiment of medium consistency and anther density produced seed.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.3
• /
• pp.153-157
• /
• 2001

Protoplasts were isolated from hypocotyls, cotyledons, and young leaves of Chinese cabbage grown under in vitro environmental condition. An enzyme mixture of 1% Cellulysin and 0.5% Macerozyme in combination with 0.4 M mannitol was most effective condition for protoplast isolation. The highest yield of protoplasts, 7.6$\times$10$^{5}$ protoplast/g of fresh weight, was obtained from the treatment of leaves for 12~16 hours at 27~28$^{\circ}C$ with shaking at 30 rpm. The most suitable medium for an initial cell division was K8p basal medium supplemented with 5 mg/L 2,4-D and 2 mg/L kinetin. Within 7~10 days, protoplasts derived from hypocotyl and cotyledon tissues formed cell colonies. When the cells were grown at the size of 8~10 cells, they were embedded into semi-solid medium containing 0.2% agarose. Calli derived from protoplast culture were transferred to the 100 different types of plant regeneration media, but no completely regenerated plants from inbred lines of Chinese cabbage used for this study wore obtained, though frequent rooting took place in several media tested.

• Journal of Microbiology
• /
• v.44 no.3
• /
• pp.263-268
• /
• 2006

Pleurotus ostreatus is a widely cultivated white-rot fungus. Owing to its considerable enzymatic versatility p. ostreatus has become the focus of increasing attention for its possible utility in biobleaching and bioremediation applications. Interactions between microorganisms can be an important factor in those processes. In this study, we describe the presence of a bacterial species associated with P. ostreatus strain G2. This bacterial species grew slowly (approximately 30 days) in the liquid and semi-solid media tested. When p. ostreatus was inoculated in solid media containing Tween 80 or Tween 20, bacterial microcolonies were detected proximal to the fungal colonies, and the relevant bacterium was identified via the analysis of a partial 16S rDNA sequence; it was determined to belong to the Burkholderia cepacia complex, but was not closely related to other fungus-isolated Burkholderiaceae. New specific primers were designed, and confirmed the presence of in vitro P. ostreatus cultures. This is the first time that a bacterial species belonging to the B. cepacia complex has been found associated with P. ostreatus.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.119-125
• /
• 2018

The particle based computational fluid dynamics (CFD) method, which follow Lagrangian approach for fluid dynamics, fluid particle behavior by tracking all particle calculation physical quantities of each particle. According to basic concept of particle based CFD method, it is difficult to satisfy continuum theory and measure influences from neighboring particle. Article number density and weight function were used to solve aforementioned issue. Difficulties continuum mean simulate non-continuum particles such as solid including granular and sand. In this regard, the particle based CFD method modified solid particle problems by replacing viscous and surface tension forces friction and drag forces. In this paper, particle interaction model for solid particle friction model implemented to simulate solid particle problems. The broken dam problem, which is common to verify particle based CFD method, used fluid or solid particles. The angle of repose was observed in the simulation results the solid particle not fluid particle.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.959-965
• /
• 2024

The High Temperature Test Unit (HTTU) was an experimental set-up to conduct separate and integral effects tests of the Pebble Bed Modular Reactor (PBMR) core. The annular core consisted of a randomly packed bed of uniform spheres. Natural convection tests using both nitrogen and helium, and forced convection tests using nitrogen, were conducted. The maximum material temperature achieved during forced convection testing was 1200 ℃. This paper presents the numerical analysis of the flow and temperature distribution for a forced convection test using 3D CFD as well as a 1D systems-CFD computer code. Several modelling approaches are possible, ranging from a fully explicit to a semi-implicit method that relies on correlations of their associated phenomena. For the comparison between codes, the analysis was performed using a porous media approach, where the conduction and radiative heat transfer were lumped together as an effective thermal conductivity and the convective heat transfer was correlated between the solid and gas phases. The results from both codes were validated against the experimental measurements. Favourable results were obtained, in particular by the systems-CFD code with minimal computational and time requirements.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.6
• /
• pp.549-558
• /
• 2022

Objectives: Poor complementary feeding practices have consistently contributed to the burden of child undernutrition in Indonesia. This study aimed to estimate the prevalence and predictors of the time of the introduction of solid, semi-solid, and soft foods (ISSSF), minimum dietary diversity (MDD), minimum meal frequency (MMF), and minimum acceptable diet (MAD). Methods: We analyzed 4804 last-born infants aged 6-23 months from the 2017 Indonesia Demographic and Health Survey, which employed multistage cluster random sampling. The outcomes were calculated based on the 2021 World Health Organization/United Nations Children's Fund guidelines. The predictors of the 4 complementary feeding indicators were assessed using multivariate Poisson regression with robust variance adjusting for potential confounders and study design. Results: The prevalence of ISSSF, MDD, MMF, and MAD was 86.1%, 54.3%, 71.8%, and 37.6%, respectively, with younger children less likely to meet 3 out of the 4 outcomes. Parental education, the presence of a birth attendant, and maternal media consumption were among the predictors of MDD and MAD. Children from families with higher income were more likely to meet MDD than those from low-income households (adjusted prevalence ratio [aPR], 1.16; 95% confidence interval [CI], 1.05 to 1.28). Living in an urban area was positively associated with MMF (aPR, 1.09; 95% CI, 1.04 to 1.15) and MAD (aPR, 1.12; 95% CI 1.02 to 1.24). In eastern regions, the prevalence of children achieving MDD and MAD was lower than in those living in Java and Bali. Conclusions: It is crucial that more attention and efforts are made to improve the recommended practices throughout Indonesia, since the prevalence of adequate complementary feeding practices remains low.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.5
• /
• pp.346-351
• /
• 2007

An efficient somatic embryogenesis and plant regeneration protocol was developed for Schisandra chinensis Baill, using embryogenic cell suspensions and optimized media conditions. Friable embryogenic callus was induced from cotyledonary leaf and hypocotyl explants of 7 days old seedlings on MS agar medium supplemented with 1.0 to $4.0\;mg\;l^{-1}$ of 2,4-dichlorophenoxyacetic acid (2,4-D). Fast growing and well dispersed embryogenic cell suspensions were developed within two months when embryogenic calli were transferred to MS liquid medium containing $1.0\;mg\;l^{-1}\;2,4-D$. One third strength of MS medium was the best for both overall growth and development of somatic embryos in liquid culture. Over 3400 viable somatic embryos were produced from each 150 ml flask with an initial cell density of 30 mg in 30 ml medium. Germinated somatic embryos developed in liquid medium converted into plantlets after transferred to half-strength MS semi-solid medium. Approximately 90% of the converted plantlets were successfully transplanted to soil and grew into fertile plants.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.223-231
• /
• 2013

This paper presents a time-domain Gauss-Newton full-waveform inversion method for the material profile reconstruction in heterogeneous semi-infinite solid media. To implement the inverse problem in a finite computational domain, perfectly-matchedlayers( PMLs) are introduced as wave-absorbing boundaries within which the domain's wave velocity profile is to be reconstructed. The inverse problem is formulated in a partial-differential-equations(PDE)-constrained optimization framework, where a least-squares misfit between measured and calculated surface responses is minimized under the constraint of PML-endowed wave equations. A Gauss-Newton-Krylov optimization algorithm is utilized to iteratively update the unknown wave velocity profile with the aid of a specialized regularization scheme. Through a series of one-dimensional examples, the solution of the Gauss-Newton inversion was close enough to the target profile, and showed superior convergence behavior with reduced wall-clock time of implementation compared to a conventional inversion using Fletcher-Reeves optimization algorithm.