• 한국측량학회지
• /
• 제31권5호
• /
• pp.401-410
• /
• 2013

최근에 공간정보에 대한 수요가 증가함에 따라, 이에 대한 지속적인 모니터링과 변화지역에 대한 효과적인 갱신을 수행하여 정보의 최신성을 확보하고 보다 정확한 정보를 취득하기 위한 다양한 연구가 진행되고 있다. 이러한 연구의 일환으로, 본 연구에서는 변화지역에 대한 갱신주기별 최적의 모니터링 운영방안을 도출하고자한다. 이를 위해, 갱신주기를 실시간갱신과 주기갱신으로 나누어 각각에 대한 대표적인 모니터링 방법의 특성과 현재 우리나라의 적용현황에 대해 서술하였다. 각 방법에 대한 장단점을 파악하여 실무 적용 가능성을 평가해보았으며, 이를 토대로 최종적으로 실시간갱신과 주기갱신 각각에 대한 최적의 모니터링 운영방안을 도출하였다.

• 한국강구조학회 논문집
• /
• 제27권2호
• /
• pp.181-193
• /
• 2015

심미성과 기능성이 현대 건축의 중요한 요소로 대두되면서 최근 비교적 경량의 고진동수 계단의 활용처가 점차 증가하고 있다. 하지만 국내의 실정 상 고진동수 계단의 진동성능을 평가하기 위한 방법이 전무한 실정이다. 유럽강구조학회의 지침의 경우 등가임펄스하중 개념을 도입하여 고진동수 바닥의 응답예측 및 진동성능 평가에 활용하고 있으나, 이는 서행보행에 대한 실험치를 토대로 제안한 값으로 2.2Hz 이상의 속보 가진에 대한 응답을 과대평가하는 한계를 지니고 있다. 이에 본 연구에는 1.4~4.5Hz의 다양한 가진진동수에 대한 가속도 응답의 실측값을 바탕으로 서행 및 속보 가진 시의 응답을 합리적으로 예측할 수 있는 등가임펄스 식을 제안하였다.

• 한국지역지리학회지
• /
• 제11권2호
• /
• pp.291-311
• /
• 2005

스페인의 전통 토지운영 체제의 하나였던 대농장은 1520년대 신대륙 개척기에 제국군대, 성직자, 상인은 물론 구대륙 생태계의 구성요소인 다양한 동식물과 함께 멕시코를 비롯한 현재의 중남미에 이식되었다. 중세기 스페인 남부의 대농체제인 라티푼디오의 전통과 신대륙의 자연환경이 접목된 아시엔다는 미국 남부의 플랜테이션에 비유되며 식민지시대가 막을 내리는 1821년에 이미 멕시코 농촌의 보편적인 경관으로 자리잡기에 이른다. 아시엔다는 식민지시대 멕시코를 일컫는 뉴-스페인 중부지방에 집중적으로 분포하였고, 입지결정에는 건조한 환경에서 필수적으로 요구되는 식수 및 농업용수가 깊이 관여하였으며, 수행하는 내부 경제출동의 종류에 따라 곡물아시엔다, 가축아시엔다, 광산아시엔다, 아네킨아시엔다 등 다양한 유형으로 분류된다. 대토지소유자, 농장관리자, 임노동 소작인을 주요 구성원으로 하는 아시엔다는 준 자급자족적 취락으로서 주거는 물론 종교, 농업, 문화전파 등 다양한 기능을 수행하였다. 식민지시대 멕시코의 아시엔다는 자본주의의 확산과 함께 전환기를 맞게되고 이를 계기로 내부적으로 대대적인 변형을 경험하는데, 축소된 형태이지만 오늘날 대농장과 영세농지를 특징으로 하는 멕시코 농촌경관의 일부로 잔존해 있다.

• 한국수산과학회지
• /
• 제45권5호
• /
• pp.445-453
• /
• 2012

This study examined microbial contamination during seasoned and dried squid Dosidicus gigas processing, including the apparatus, machines, and employee's gloves at each step in processing at two companies. The numbers of bacteria floating in air in each processing area were also examined. The numbers of Staphylococcus aureus (3.6-6.0 log CFU/g) and Escherichia coli (1.3-1.4 log MPN/100 g) in domestic and imported daruma (a semi-processed product of seasoned and dried squid) at companies A and B exceeded the regulatory limits of the Food Sanitary Law of Korea (S. aureus, ${\leq}2.0$ log CFU/g; E. coli, negative). S. aureus in both daruma was reduced to below the detection limit or 3.6 log CFU/g after the roasting step, but increased again to 3.3 and 5.5 log CFU/g after the mechanical tearing step at companies A and B, respectively. E. coli showed similar tendencies at both companies. The surfaces of the apparatus, machines, and employee's gloves that contacted daruma were also contaminated with S. aureus (1.0-5.5 log CFU/$m^2$) and E. coli (negative-to 3.5 log MPN/$m^2$). The numbers of bacteria floating in air were high (1.7-5.1 log CFU/$m^3$) at both companies. These results suggest that sanitation standard operating procedures (SSOP) must be developed to control of microbial cintamination in seasoned and dried squid.

• Environmental Engineering Research
• /
• 제20권2호
• /
• pp.127-132
• /
• 2015

Perfluorooctane sulfonate (PFOS) and Perfluorooctanoic acid (PFOA) are persistent environmental pollutants, extremely stable, and possibly adversely affect human health. They are widely used in many industries and consumer goods, including sunscreen products. These substances are stable chemicals made of long carbon chains, having both lipid- and water-repellent qualities. The research objectives are (1) to find the most effective method for the preparation of semi-liquid samples by comparing solid phase extraction (SPE) and centrifugation after Pressurized liquid extraction (PLE), and (2) to determine the contamination levels of PFOS and PFOA in waterproof sunscreen samples. All sunscreen samples were analyzed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Sunscreen samples were purchased from domestic and international brands sold in Thailand. Special chemical properties were considered for the selection of samples, e.g., those found in waterproof, sweat resistant, water resistant, and non-stick products. Considering the factors of physical properties, e.g., operation time, chemical consumption, and recovery percentage for selecting methods to develop, the centrifugation method using 2 mL of extracted sample with the conditions of 12,000 rpm and $5^{\circ}C$ for 1 hour after PLE was chosen. The highest concentrations of PFOS and PFOA were detected at 0.0671 ng/g and 21.0644 ng/g, respectively. Even though present concentrations are found at ng/g levels, the daily use of sunscreen products is normally several grams. Therefore, a risk assessment of PFOS and PFOA contamination in sunscreen products is an important concern, and more attention needs to be paid to the long-term effects on human health.

• 한국환경복원기술학회지
• /
• 제12권1호
• /
• pp.52-66
• /
• 2009

The increase of rice productivity, the decrease of rice demand, aging farmers, and the market-opening of rice along with the domestic and international conditions changes have been led to the increase of the abandoned rice paddy fields. Such abandoned rice paddy fields have been left in many areas and most of them have become wetlands. The purpose of this study is methodology of selection to the wetland for development in the abandoned rice paddy fields along with surroundings. The selection of habitat suitability index assessment study to conservation and restoration was done through hydrology, wild animals habitation, wetland vegetation, outside disturbance, and natural purification capacity assessment. In addition, the same method was applied to assessment items and standards for both the restoration site selection and the type of restoration. Both assessment items and standards were applied to the sites, drawn on the maps, and overlayer for the comprehensive map, and then the wetland suitability index was applied to the suitable site. The development technique was applied to 10 sites near the Banwol Stream watershed in Gunpo, Gyeonggi province. The selection of conservation, restoration, and the optimal sites can lead to not only the biodiveristy increase in agricultural or semi natural areas but also to the establishment of ecological networks in national level.

• 한국약용작물학회지
• /
• 제9권2호
• /
• pp.139-145
• /
• 2001

도입한 작약 92계통중 12계통은 조기 고사하거나 생육이 불량하였고 80계통 중 65계통의 개화하였다. 조기개화계통으로는 9616, 9646, 9671등이 있었고 만기개화계통으로는 9632, 9638, 9658등이 있었다. 9651, 9655, 9662, 9677등은 절화용으로 좋았다. 9645, 9653은 semi-double형으로 독특하였고 9635는 백색과 황색의 겹꽃으로 아름다웠다. 9637, 9645, 9670은 키 큰 화단용으로 좋을 뿐 아니라 뿌리수량이 매우 높아 다수성 계통으로 평가되었다. 9613, 9628, 9635, 9642, 9655, 9680은 paeoniflorin 고함량 계통이었다. 이런 다수성 계통 및 Paeoniflorin 고함량 계통은 약용작약품종의 육종자원으로도 이용될 수 있을 것이며 9637, 9645, 9676, 9677등은 수량과 약효성분이 적절하여 관상용과 약용을 겸한 겸용품종으로 이용 가능성을 보였다.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.55-66
• /
• 2017

Korean small and medium sized software companies have tried to export their solutions or services to overseas markets. In 2016, exports of the software industry increased by 6.0% from the previous year, and the value added of the industry was 2.2 times higher than that of the manufacturing industry. From a long-term perspective, it is important to secure a global competitive advantage in order to sustain the export high value-added of the software industry. The obstacles to entry into the overseas market of small to medium enterprises are as follows: first, difficulty in product development and localization of marketing; second, lack of investment for overseas expansion; and finally, competitiveness of software technology. In particular, To overcome such obstacles, Korean small and medium sized software companies should increase the technical perfection and secure software export competitiveness. The paper presents a payment settlement framework enabling adaptive reuse and semiautomatic development of global payment settlement services. The quantitative and qualitative evaluation results are presented with domestic and overseas case studies as follows: Firstly, semi-automatic development is realized successfully by applying the framework. Secondly, it is possible to maintain consistent quality of software and to deliver maintenance services without relying on the internal human resources. Thirdly, it is possible to reduce the project duration of the same development cope to less than 50% by applying the framework. Finally, because it is based on BPMN 2.0, which is a high level design diagram, it is expected that it will be easy to implement through components connection and reduce difficulties in technology transfer and localization. Also, at the time of runtime operation, it will be effective to understand the design idea easily and to carry out additional developments without human resource who participated in the initial project.

• 청정기술
• /
• 제2권2호
• /
• pp.100-125
• /
• 1996

After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.

• 한국건설관리학회논문집
• /
• 제9권3호
• /
• pp.108-117
• /
• 2008

최근 유통시설물 공사의 증가와 함께 발주처와 시공사간의 불확실성 요인에 따른 공사비 계약 및 정산방식에 있어서 분쟁의 소지가 많이 제기되고 있다. 이에 초기 착공 시 공사비에 대한 명확한 검증기준이 마련되어야 하며, 저가 공사수주로 인한 공기지연, 품질저하 등을 미연에 예방할 수 있는 적정공사비 추정이 가능해야 할 것이다. 이와 같은 관점에서 본 연구에서는 대형 유통시설물의 공사비 예측을 통한 초기 투자비 분석 및 공사 진행시 발주자와 시공사간의 원만한 공사 진행을 위해 국내 유통시설물 관련 15개 현장의 실적공사비를 조사 분석하여 공법 및 공간, 면적별 적정공사비를 산출하였으며, 이를 근거로 신규 프로젝트 진행시 초기 기획 설계단계에서 부터 타당성 조사를 위한 예측공사비 분석을 통하여 유통시설물 사업의 적정성 여부를 결정하는 수단으로 활용될 수 있는 자료를 제시하고자 하였다.