• Communications of the Korean Mathematical Society
• /
• v.26 no.1
• /
• pp.115-124
• /
• 2011

In this paper, some fuzzy fixed point theorems for fuzzy mappings are established by considering the nonempty closed $\alpha$-cut sets. Some importance observations are also discussed. Our results clearly extend, generalize and improve the corresponding results in the literatures, which have given most of their attention to the class of fuzzy sets with nonempty compact or closed and bounded $\alpha$-cut sets.

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.2016-2024
• /
• 2005

In this work, a mixed beam approach that combines both the stiffness and the flexibility methods has been performed to analyze the coupled composite blades with closed, two-cell cross-sections. The Reissner's semi-complementary energy functional is used to derive the beam force-displacement relations. Only the membrane part of the shell wall is taken into account to make the analysis simple and also to deliver a clear picture of the mixed method. All the cross section stiffness coefficients as well as the distribution of shear across the section are evaluated in a closed-form through the beam formulation. The theory is validated against experimental test data, detailed finite element analysis results, and other analytical results for coupled composite blades with a two-cell airfoil section. Despite the simple kinematic model adopted in the theory, an accuracy comparable to that of two-dimensional finite element analysis has been obtained for cases considered in this study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1763-1773
• /
• 1998

In the present experimental study, the flow behavior in a semi-closed two-phase natural circulation loop was examined. Water was used as the working fluid. Heat flux, heater-inlet subcooling, and flow restrictions at the heater-inlet and at the expansion-tank-line were taken as the controlling parameters Six circulation modes were identified by changing heat flux and inlet subcooling conditions ; single-phase continuous circulation, periodic circulation (A), two-phase continuous circulation, and periodic circulations (B), (C), and (D). Among these, the single-phase and two-phase continuous-circulation modes exhibit no significant oscillations and are considered to be stable. Periodic circulation (A) is characterized by the large amplitude two-phase f10w oscillations with the temporal single-phase circulation between them, while periodic circulation (B) featured by the flow oscillations with continuous boiling inside the heater section. Periodic circulation (C) appears to be the manometric oscillation with continuous boiling. Periodic circulation (D) has the longer period than periodic circulation (B) and a substantial amount of liquid flow back and forth through the expansion-tank-line periodically ; this mode is considered the pressure drop oscillation. Parametric study shows that the increases of the inlet- and expansion-tank-line- restrictions and the decrease of inlet subcooling broaden the range of the stable two-phase(continuous circulation) mode.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.409-418
• /
• 1999

Gamcheon Bay has complicated and unique flow pattern which is affected by topography characteristics of a semi-closed bay and warm water discharge from the power plant located at the bay. It is very important to consider warm water discharge with tidal period and wind effects, which are mainly acting on the surface flow patterns in Gamcheon Bay. The results of observation show as follows; i) Because Gamcheon bay has much elongated shape to the north-south direction and narrow entrance with two separated breakwaters, the flow is very weak inside the bay. ii) The main flow path is at the west side of the bay. The direction of flood current is northward along the west side of the bay and the direction of ebb current is southward along the west side of the bay. The southward direction of warm water discharge has curved to the west side of the bay. iii)At the period of flood current for neap tide, the flow direction is southward in the bay, which is thought by the effects of warm water discharge. But at the bottom layer, the effects of tidal current reached to the middle of the bay, and showed features like eddy. iv) The wind effect is very strong, especially, prominent in the west and east side of the bay.

• Journal of Communications and Networks
• /
• v.12 no.3
• /
• pp.222-230
• /
• 2010

In this paper, we present a closed-form approximation of the average sum rate of zero-forcing (ZF) beamforming (BF) with semi-orthogonal user selection (SUS). We first derive the survival probability associated with the SUS that absolute square of the channel correlation between two users is less than the orthogonalization level threshold (OLT).With this result, each distribution for the number of surviving users at each iteration of the SUS and the number of streams for transmission is calculated. Secondly, the received signal power of ZF-BF is represented as a function of the elements of the upper triangular matrix from QR decomposition of the channel matrix. Thirdly, we approximate the received signal power of ZF-BF with the SUS as the maximum of scaled chisquare random variables where the scaling factor is approximated as a function of both OLT and the number of users in the system. Putting all the above derivations and order statistics together, the approximated ergodic sum rate of ZF-BF with the SUS is shown in a closed form. The simulation results verify that the approximation tightly matches with the sample average for any OLT and even for a small number of users.

• Transactions of Materials Processing
• /
• v.7 no.2
• /
• pp.139-149
• /
• 1998

The technology of Semi-Solid Forging(SSF) has been actively developed to fabricate near net shape products using light and hardly formable materials. Generally the SSF process is composed of slug is compressed during a certain holding time in order to completely fill the die cavity and accelerate the solidification rate. The decision of compression time is important since it can affect microstructural characteristics, mechanical properties and shape of products.. In order to determine it proper overall heat transfer coefficient between the slug and dies should be investigated. This paper presents the procedure to find the overall heat transfer coefficient between the slug and dies by nonlinear optimization of temperature and solid fraction for a cylindrical slug at compression step in closed-die semi-solid forging. In finite ele-ment heat transfer analysis release of latent heat during solidification was considered. The influence of the predicted compression time on miscrostructural characteristics mechanimcal properties and shape of products is finally investigated by experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.186-194
• /
• 2001

To meet the challenge of testing increasingly complex automotive control systems, the real-time hardware-in-the-loop(HIL) simulation technology has been developed. In this paper, a strategy for evaluation of semiactive suspension systems using real-time HIL simulation is presented. A multibody vehicle model is adopted to simulate vehicle dynamic motions accurately. Accuracy of the vehicle simulation results is compared to that of the real vehicle field test and proven to be very accurate. The controller and stepping motor to adjust semi-active damper stage are equipped as external hardwares and connected to the real-time computer which has vehicle dynamic model. Open and closed loop test methods are used to evaluate a controlled suspension system and the system's operations are verified it is found that the proposed evaluation methods can be used well for the verification of semi-active suspension systems.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.6
• /
• pp.353-364
• /
• 2020

This paper presents the semi-analytical ice load calculation methods that are useful to simulate the ice-breaking process. Since the semi-analytical methods rely on the previously developed closed form equations or numerical analysis results, the user's exact understanding for the equations must be supported in order to use the methods properly. In this study, various failure modes of ice such as local crushing, in-plane splitting failure, out-of-plane bending failure and radial or circumferential cracking with rotation of the broken ice floe are considered. Based on the presented methods, the fracture modes were evaluated according to the size and thickness of ice. In addition, time series analysis for the ice-breaking process was performed on several ice conditions and the results were analyzed.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.3
• /
• pp.57-66
• /
• 2018

Recently various composite beams in which concrete is filled in the U-shaped steel plate have been developed for saving story height and reducing construction period. Due to the high flexural stiffness and strength, they are widely being used for the building with large loads and long spans. The semi-slim AU composite beam has proven to take highly improved stability compared to the existing composite beams, because it consists of the closed steel section by attaching cap-type shear connectors to the upper side of U-shaped steel plate. In this study the finite element analyses were performed to evaluate the safety of the AU composite beam with unconsolidated concrete which were sustained through the closed steel section during the construction phase. The analyses were performed on the two types of cross section applied to the fabrication of AU composite beams, and the results were compared to the those of 2-point bending tests. In addition, the flexural performance according to the space of intermittent cap-type shear connectors and the location of reinforcing steel bars for compression was comparatively investigated. Through the results of analytical studies, it is preferable to adopt the yield moment of AU composite beam for evaluating the safety in the construction phase, and to limit the space of intermittent shear connectors to 400 mm or less for the construction load.

• The Journal of Korean Physical Therapy
• /
• v.28 no.2
• /
• pp.65-70
• /
• 2016

Purpose: The aim of this study was to determine the effects of electromyographic (EMG)-Biofeedback using closed kinetic chain exercise (EB-CKCE) on quadriceps angle (Q-angle) and quadriceps muscle activation and muscle activation ratio in subjects with patellofemoral pain syndrome and to provide fundamental information on rehabilitation exercise in patellofemoral pain syndrome. Methods: Thirty participants who met the criteria were included. The subjects were randomly divided into three groups: control group (Group I, n=10), semi-squat exercise group (Group II, n=10), and EMG-Biofeedback using closed kinetic chain exercise group (Group III, n=10). Intervention was provided to each group for eight weeks (three times per week; 30 minutes per day). Subjects were measured on Q-angle and quadriceps muscle activation. Results: Significant difference in Q-angle and quadriceps muscle activation was observed in groups II and III compared with control group I (p<0.01). Results of post-hoc analysis showed a significant difference in Q-angle and quadriceps muscle activation in on group III compared with groups I and II. Conclusion: Findings of this study suggest that closed kinetic chain exercise using EMG-Biofeedback that provides real-time biofeedback information on muscle contraction may have a beneficial effect on improvement of Q-angle and quadriceps muscle activation in patellofemoral pain syndrome.