• The Korean Journal of Pain
• /
• 제11권2호
• /
• pp.220-225
• /
• 1998

Background: The patients of facial hyperhidrosis have been known that they had much difficulties in interpersonal relationships and social activities due to excessive hidrosis when they were in stress, hot weather, or having meals. Previous drug therapy and stellate ganglion block have only temporary effects. The surgical method, $T_1$ sympathetomy has the risk of Hornor's syndrome. For that reasons, the sympathicotomy of proximal and distal portions of $T_2$ sympathetic ganglion with electroresectoscope used in transurethral resection seemed to be appropriate procedure, and we would like to report the results of our procedure. Method: Under the general anesthesia with semi-sitting position, and the portal was made through the small incision along the upper border of the 4th rib at the crossing point of mid-axillary line. After the partial collapse of lung by insufflation of 300 to 500 ml of $CO_2$, $T_2$ sympathetic ganglion was identified and resected proximally and distally with electro-cauterization. Finally the lung was expanded by limiting flow until the airway pressure reached 30 to 40 cm$H_2O$, and the wound was closed after removal of electroresectoscope. Result: There was no postoperative complication requiring surgical interventions. The facial sweating was stopped immediately after the operation and all the patients appeared to be satisfied. Conclusion: $T_2$ sympathicotomy with TUR electroresectoscope is thought be the minimal invasive and highly successful method in the treatment of facial hyperhidrosis. But longer terms follow-up will be needed to prove this result.

• 한국동물생명공학회지
• /
• 제35권3호
• /
• pp.279-288
• /
• 2020

Changes of gonadal morphology and mRNA expression patterns of vitellogenin were investigated in Siberian sturgeon Acipenser baerii (Chondrostei) during its early gonadal maturation period. Early differentiations and morphological transitions of both ovaries and testes appeared to occur actively until the age of 3 years, however from then on, the maturation patterns to full maturity were largely gender-dependent, in which males showed a faster progression of maturation than did females while females experienced a steady-state progress with a lagged interval before entering the final maturation. Expression of vitellogenin mRNAs are closely correlated with transitional patterns of gonadal appearances. In both females and males, hepatic mRNA levels of vitellogenin exponentially increased in the earliest interval (up to 1-year-old). However, in subsequent periods, vitellogenin expression in females continued to increase with age, whereas in males, the expression stabilized at a younger age. Nevertheless, at the age older than or equal to 7-year-old, fully matured individuals showed a quite low level of vitellogenin expression in both females and males. Collectively, results from this study could be useful as a fundamental guideline to address the gonad maturation of this sturgeon species, which is helpful for making practical decisions about farming practices and management for caviar production on local sturgeon farms.

• 한국항해항만학회지
• /
• 제28권10호
• /
• pp.925-931
• /
• 2004

목포항 인접해역은 영산강 하구둑과 영암-금호방조제 건설로 인하여 많은 변화를 가져왔다. 특히, 영산강 하구둑과 영암-금호방조제 방류에 의한 영향은 조류속 변화와 퇴적특성 변화와 같은 환경적 영향을 초래하기 때문에 중요하다. 본 연구에서는 영암-금호방조제, 영산강 하구둑 방류현황을 수집${\cdot}$분석하고, 이를 바탕으로 하여 기존의 수치모형실험에서 간과되어 온 방류와 관련된 각종 실험계수를 재조정하여 수치모의론 수행하여 인근 해역 특성을 분석하였다. 영암-금호방조제에서의 방류량에 따른 조류변화를 파악하였으며 이에 기초하여 퇴적특성 변화를 비교한 결과, 조류 순환과 밀접한 관련이 있음을 알 수 있었다.

• 한국습지학회지
• /
• 제7권2호
• /
• pp.53-67
• /
• 2005

천수만은 전형적인 반 폐쇄형만으로 수로, 사퇴, 작은 섬 그리고 갯벌 등 다양한 환경들이 있다. 1983년에서 1985년 사이에 건설된 서산 A와 B 방조제는 천수만 북부의 퇴적환경을 지속적으로 변화시켰을 것으로 보인다. 황도 갯벌과 주변 해역의 퇴적환경을 파악하기 위하여 2003년 6월과 10월에 표층과 주상 퇴적물을 채취하였다. 표층 퇴적물은 5개의 퇴적상으로 구성되어 있었다. 일반적으로 10월의 표층퇴적물은 6월과 비교하여 갯벌은 조립해 졌으나 주변 해역은 거의 변화가 없었다. 3개의 주상퇴적물의 퇴적상은 황도 주변 갯벌은 파랑과 조류 에너지가 상대적으로 높고, 조수로 근처의 갯벌은 에너지가 상대적으로 낮은 것으로 나타났다. 황도 갯벌의 11개월 동안 단기 퇴적률은 중앙지역은 퇴적 되었으나, 갯벌의 동쪽 측면과 서쪽 측면은 침식된 것으로 나타났다. 이는 방조제에 의하여 조류 형태와 퇴적물 순환이 변화되었기 때문으로 보인다.

• 한국해양바이오학회지
• /
• 제4권1호
• /
• pp.24-30
• /
• 2010

Species Kappaphycus alvarezii (Doty) Doty, Kappaphycus striatum (Schmitz.) Doty and Eucheuma denticulatum (N. L. Burman) Collins et Harvey, which was brought to Vietnam from Japan in 1993 and Coco island, Martan Sea, Cebu, Philippines in 2005 have been cultivated in the different coasts of South Central Vietnam. Their growth rates and physical properties of carrageenan, then, were analyzed. The obtained results showed that the growth rate of E. denticulatum and K. striatum strains is higher than those of K. alvarezii. Species of K. striatum could grow over wide range of temperature and tolerate more strongly to high temperature compared with K. alvarezii, but their content and gel strength of kappa-carrageenan were almost the same and high. For purpose of the Kappahycus cultivation farms with stable and high production all year round (especially in the seawaters of shallow, semi-closed Lagoons where the water movement is not good and with high temperature in the hot season), mixed cropping of K. alvarezii and K. striatum as seeds stock during different cropping seasons was established. Our results suggested that K. alvarezii and K. striatum could be grown in the cool season (from Oct. to next March) with the same and high content and gel strength of kappa - carrageenan, but in the hot season need to chose K. striatum for cultivation only (from Apr. to Sept.).

• Structural Engineering and Mechanics
• /
• 제58권1호
• /
• pp.59-91
• /
• 2016

Laminated composite shells are commonly used in various engineering applications including aerospace and marine structures. In this paper, using semi-analytical finite strip method, the buckling behavior of laminated composite deep as well as thick shells of revolution under follower forces which remain normal to the shell is investigated. The stiffness caused by pressure is calculated for the follower forces subjected to external fibers in thick shells. The shell is divided into several closed strips with alignment of their nodal lines in the circumferential direction. The governing equations are derived based on first-order shear deformation theory which accounts for through thickness-shear flexibility. Displacements and rotations in the middle surface of shell are approximated by combining polynomial functions in the meridional direction as well as truncated Fourier series with an appropriate number of harmonic terms in the circumferential direction. The load stiffness matrix which accounts for variation of loads direction will be derived for each strip of the shell. Assembling of these matrices results in global load stiffness matrix which may be un-symmetric. Upon forming linear elastic stiffness matrix called constitutive stiffness matrix, geometric stiffness matrix and load stiffness matrix, the required elements for the second step analysis which is an eigenvalue problem are provided. In this study, different parameter effects are investigated including shell geometry, material properties, and different boundary conditions. Afterwards, the outcomes are compared with other researches. By considering the results of this article, it can be concluded that the deformation-dependent pressure assumption can entail to decrease the calculated buckling load in shells. This characteristic is studied for different examples.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.1-8
• /
• 1986

This paper is concerned with a gas sensor composed of semi-conducting ${\gamma}$-$Fe_2O_3$ ceramics made by oxidizing $Fe_2O_3$ sintered body. Acicular $\alpha$-FeOOH powder prepared by precipitation of $FeSO_4$.$7H_2O$ solution was transformed to $FeSO_4$ sintered at 700$^{\circ}$-850$^{\circ}$C for 1 hr. and then oxidized to ${\gamma}$-$Fe_2O_3$ The gas sensitive properties of ${\gamma}$-$Fe_2O_3$ ceramic bodies based on the lectrical resistance change was measured in 0.5-2 vol% $H_2$ and $C_2$ $H_2$ gas at 35$0^{\circ}C$ The specific surface area of sintered specimen largely dependent on the sintering temperature and grain shape directly affected the gas sensitive pro-perties of ${\gamma}$-$Fe_2O_3$gas sensor. Specimens having larger specific surface area showed better sensitivity which means the electrical resistance change due to oxidation and reduction process occurs on ly at the surface of grains microscopically in the ${\gamma}$-$Fe_2O_3$ceramics. Micropores made in $Fe_2O_3$ powder during dehydration of $\alpha$-FeOOH can not prompt the gas sensitive properties of sintered ${\gamma}$-$Fe_2O_3$ because they are sintered or closed in the grains during sintering process and dose not affect the specific surface area of sintered body.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.587-614
• /
• 2014

In recent years the interest in online monitoring of lightweight structures with ultrasonic guided waves is steadily growing. Especially the aircraft industry is a driving force in the development of structural health monitoring (SHM) systems. In order to optimally design SHM systems powerful and efficient numerical simulation tools to predict the behaviour of ultrasonic elastic waves in thin-walled structures are required. It has been shown that in real industrial applications, such as airplane wings or fuselages, conventional linear and quadratic pure displacement finite elements commonly used to model ultrasonic elastic waves quickly reach their limits. The required mesh density, to obtain good quality solutions, results in enormous computational costs when solving the wave propagation problem in the time domain. To resolve this problem different possibilities are available. Analytical methods and higher order finite element method approaches (HO-FEM), like p-FEM, spectral elements, spectral analysis and isogeometric analysis, are among them. Although analytical approaches offer fast and accurate results, they are limited to rather simple geometries. On the other hand, the application of higher order finite element schemes is a computationally demanding task. The drawbacks of both methods can be circumvented if regions of complex geometry are modelled using a HO-FEM approach while the response of the remaining structure is computed utilizing an analytical approach. The objective of the paper is to present an efficient method to couple different HO-FEM schemes with an analytical description of an undisturbed region. Using this hybrid formulation the numerical effort can be drastically reduced. The functionality of the proposed scheme is demonstrated by studying the propagation of ultrasonic guided waves in plates, excited by a piezoelectric patch actuator. The actuator is modelled utilizing higher order coupled field finite elements, whereas the homogenous, isotropic plate is described analytically. The results of this "semi-analytical" approach highlight the opportunities to reduce the numerical effort if closed-form solutions are partially available.

• Wind and Structures
• /
• 제27권2호
• /
• pp.71-88
• /
• 2018

At the University of Western Ontario (UWO), numerical tools represented in semi-closed form solution for the conductors and finite element modeling of the lattice tower were developed and utilized significantly to assess the behavior of transmission lines under downburst wind fields. Although these tools were validated against other finite element analyses, it is essential to validate the findings of those tools using experimental data. This paper reports the first aeroelastic test for a multi-span transmission line under simulated downburst. The test has been conducted at the three-dimensional wind testing facility, the WindEEE dome, located at the UWO. The experiment considers various downburst locations with respect to the transmission line system. Responses obtained from the experiment are analyzed in the current study to identify the critical downburst locations causing maximum internal forces in the structure (i.e., potential failure modes), which are compared with the failure modes obtained from the numerical tools. In addition, a quantitative comparison between the measured critical responses obtained from the experiment with critical responses obtained from the numerical tools is also conducted. The study shows a very good agreement between the critical configurations of the downburst obtained from the experiment compared to those predicted previously by different numerical studies. In addition, the structural responses obtained from the experiment and those obtained from the numerical tools are in a good agreement where a maximum difference of 16% is found for the mean responses and 25% for the peak responses.

• 한국습지학회지
• /
• 제9권2호
• /
• pp.71-84
• /
• 2007

마산만은 한국의 대표적인 반 폐쇄성 내만으로 유속이 느리며, 해수의 순환이 제한되어 입자물질의 침강이 주로 일어나고 있다. 특히, 육상기원 오염물질 유입은 환경오염문제를 일으켜, 부영양화, 적조, 저층 빈산소 현상 등의 문제가 빈번히 발생하고 있다. 본 연구에서는 생태계 모델을 이용하여, 이매패류를 포함하는 생태계 시스템에서 물질순환 과정의 계산을 수행하였으며, 여과식자인 이매패류에 의한 COD와 식물플랑크톤 같은 입자유기물질의 제거 효과도 계산하였다. 또한, 이매패류 양식장의 입식위치와 입식량을 산정하여, 생물학적 수질관리에 적용하고자 하였다. 모델결과에서, 최적 입식위치는 해양 물리적 과정을 참고로 하여 식물플랑크톤의 집적이 일어나는 곳을 선정하였으며, 최적 입식밀도는 35 개체/$m^{-3}$였고, 최적 입식 면적은 약 500 ha로 나타났다. 이매패류가 최적의 성장을 보인다고 가정하면, 육상부하의 삭감에 관한 노력 없이도 수중의 COD 농도의 18%의 개선효과가 나타났다.