• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.17-23
• /
• 2008

The purpose of this study is to estimate the shrinkage of wood by LV-SEM (Low-Vacuum Scanning Electron Microscope) which can observe wetted wood sample. The shrinkage of small sample specimen by the dehumidification in the specimen chamber was investigated and compared with that of normal wood specimen. The observation of cross sectional surface of wood from wetted condition to dried condition can be achieved in about twenty minutes by means of the dehumidification in the specimen chamber of LV-SEM. The volumetric shrinkage of earlywood was almost the same as that of latewood. The shrinkage of SEM observation specimen was similar to that of normal wood specimen. From the correlation of the shrinkages between SEM observation specimen and normal wood specimen, it is surmised that the shrinkage of wood is more strictly dominated by shrinkage of latewood than that of earlywood.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.115-117
• /
• 1999

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.05a
• /
• pp.24-25
• /
• 1995

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.68-77
• /
• 2018

In order to analyze the overall characteristics of the lunar orbiter, the Variable Coast method, which can be launched everyday, is applied to the 3.5 phasing loop transfer trajectory. The mission scenario for the entire process from launching to entering the lunar orbit is set up and performed simulation by selecting the launch pad and launch vehicle. In particular, the SEM(Satellite-Earth-Moon) angle defined in Earth-Moon rotating frame is an important constraint to comprehensively evaluate the 3.5 phasing loop transfer trajectory. The simulation using SEM angle is analyzed from various viewpoints such as launch epoch, coast duration, perigee altitude and ${\Delta}V$ not only trans-lunar trajectory but lunar orbit insertions and the optimum SEM angle is suggested in this study. It is expected that this results will be helpful to evaluate the characteristics of the 3.5 phasing loop transfer trajectory according to the launch vehicle selection by comparison with Fixed Coast analysis results in the future.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.463-470
• /
• 2007

Revocation is one of the main difficulties faced in implementing Public Key Infrastructures(PHs). Boneh, Ding and Tsudik first introduced a mediated cryptography for obtaining immediate revocation of RSA keys used in PKIs. Their method is based on the idea that each user's private key can be split into two random shares, one of which is given to the user and the other to an online security mediator(SEM). Thus any signature or decryption must be performed as a cooperation between a user and his/her associated SEM and revocation is achieved by instructing the mediator SEM to stop cooperating the user. Recently, Libert and Quisquater showed that the fast revocation method using a SEcurity Mediator(SEM) in a mRSA can be applied to the Boneh-Franklin identify based encryption and GDH signature schemes. In this paper we propose a mediated identity based signature(mIBS) with batch verification which apply the SEM architecture to an identity based signature. Libert's GDH siganture scheme is not forward secure even though forward security is an important and desirable feature for signature schemes. We propose an efficient key udating mediated signature scheme, mKUS based on mIBS and analyze its security and efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1070-1077
• /
• 2011

This paper is studied on the influence of machining conditions on weldability obtained by ultrasonic machining. The weldability estimation of dissimilar Ni-Cu sheets with the optimization of one-wavelength horn is confirmed by the use of ultrasonic machining. The optimal welding condition with tensile test by setting the ultrasonic machining parameters is suggested and the weldability is estimated by SEM observation and EDX-ray analysis. Experimental studies are worked with the measure of tensile strength and the analysis of SEM photograph after the ultrasonic machining of workpiece. Machining parameters of machining time, pressure, and amplitude are also applied to this paper.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1288-1293
• /
• 2007

The present study covers the design and analysis of a thermionic scanning electron microscope (SEM) column. The SEM column contains an electron optical system in which electrons are emitted and moved to form a focused beam, and this generates secondary electrons from the specimen surfaces, eventually making an image. The electron optical system mainly consists of a thermionic electron gun as the beam source, the lens system, the electron control unit, and the vacuum unit. In the design process, the dimension and capacity of the SEM components need to be optimally determined with the aid of finite element analyses. Considering the geometry of the filament, a three-dimensional (3D) finite element analysis is utilized. Through the analysis, the beam emission characteristics and relevant trajectories are predicted from which a systematic design of the electron optical system is enabled. The validity of the proposed 3D analysis is also discussed by comparing the directional beam spot radius. As a result, a prototype of a thermionic SEM is successfully developed with a relatively short time and low investment costs, which proves the adoptability of the proposed 3D analysis.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2010.04a
• /
• pp.67-67
• /
• 2010

이미지를 이용한 도공층 구조 분석은 도공층의 실제 Morphology를 분석하여 평가하는 방법으로서 최근 세밀한 도공층 구조 분석을 위해 이 방법에 대한 많은 연구가 진행되고 있다. 특히 이러한 방법은 수은압입법(Mercury intrusion)이나 질소흡착법 (Nitrogen adsorption by BJH theory) 등과 같은 기존의 공극 특성 평가 방법과 달리 pore aspect ratio 및 orientation 등과 같은 공극 dimension을 평가할 수 있는 장점이 있다. 이러한 공극 dimension은 size distribution 및 porosity와 더불어 인쇄, 라미네이션 접착 등과 같은 Liquid interfacial 및 침투 측면에서 중요한 요소이기 때문에 이를 평가하기 위한 적합한 방법으로 인식되고 있다. 또, 원지 부분과 도공층 간의 경계를 명확하게 보여주고 Surface와 Cross-section 영역을 구분하여 평가 할 수 있어 더 명확한 평가를 가능하게 한다. 본 연구에서는 이미지 분석을 통해 도공액 구성 조건에 따른 도공층의 공극 구조 특성을 평가 하였고 일부 요소에 대해서는 수은 압입법과 비교 평가하여 이미지 분석법과의 상관성에 대해 고찰 하였다. 본 연구에서 사용된 FE (Field Emission)-SEM은 일반 SEM과 달리 전압에 의한 높은 전기장의 형성을 통해 저 가속 전압으로 이미지를 구현하는 장비로서 본 연구에서는 FE-SEM을 통해 도공층의 세밀한 Morphology와 공극 구조 이미지를 구현할 수 있었다.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.5
• /
• pp.7-20
• /
• 2019

Purpose - This study provides appropriate procedures for EFA to help researchers conduct empirical studies by using PLS-SEM. Research design, data, and methodology - This study addresses the absolute and relative sample size criteria, sampling adequacy, factor extraction models, factor rotation methods, the criterion for the number of factors to retain, interpretation of results, and reporting information. Results - The factor analysis procedure for PLS-SEM consists of the following five stages. First, it is important to look at whether both the Bartlett test of sphericity and the KMO MSA meet the qualitative criteria. Second, PAF is a better choice of methodology. Third, an oblique technique is a suitable method for PLS-SEM. Fourth, a combined approach is strongly recommended to factor retention. PA should be used at the onset. Next, it is recommended using the K1 criterion. In addition, it is necessary to extract factors that increase the total variance explanatory power through the PVA-FS. Finally, it is appropriate to select an item with a factor loading into 0.5 or higher and a communality of 0.5. Conclusions - It is expected that the accurate factor analysis processed for PLS-SEM as previously presented will help us extract more precise factors of the structural model.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2633-2636
• /
• 2011

A new type of ionic liquid based on N-(3-aminepropyl)imidazolium iodide, called IIQAI, which consists of imidazolium and quaternary ammonium salt, and APII-(hydroxyethyl, propyl, hexyl) were synthesized and used as ionic liquid in dye-sensitized solar cells. APII-hexyl is solid, whereas IIQAI, APII-(hydroxyethyl, propyl) are viscous liquids. The synthesized ionic liquid showed relative thermal stability compared to the commercial ionic liquid of DMII. Among them, IIQAI was more stable than the other ionic liquid because of the two salt groups. APII-hydroxyethyl, which contains two hydroxyl groups, showed low viscosity with good flow. New types of ionic liquids were examined by $^1H$-NMR spectroscopy, thermo gravimetric analysis (TGA). IIQAI enabled a solar energy conversion efficiency of 6.3%, which is slightly higher than that of the referenced (DMII, 6.2%).