• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1570-1575
• /
• 1991

The feasibility of using an adaptive resonance network (ART2) with unsupervised learning capability for too] wear detection in turning operations is investigated. Specifically, acoustic emission (AE) and cutting force signals were measured during machining, the multichannel AR coefficients of the two signals were calculated and then presented to the network to make a decision on tool wear. If the presented features are significantly different from previously learned patterns associated with a fresh tool, the network will recognize the difference and form a new category m worn tool. The experimental results show that tool wear can be effectively detected with or without minimum prior training using the self-organization property of the ART2 network.

• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.375-379
• /
• 2003

In this paper, a novel design of multilayer ceramic-based Transmit/Receive (T/R) switch using Low Temperature Co-fired Ceramic (LTCC) technology have been presented. Compact T/R switch has been designed by transforming quarter-wave transmission line to its lumped equivalent circuit. Especially, high-Q three dimensional inductors with double strip have been proposed and incorporated. The proposed inductor has been modeled by multi-conductor coupled lines. A measured inductor quality factor (Q) of 80 and a Self-Resonance Frequency (SRF) of 6.6 GHz have been demonstrated. The inductor library has been incorporated into the design of WCDMA T/R switch.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.947-950
• /
• 2007

In this study, vibration analysis of a refrigerator was carried out to reduce vibration by considering grommet. When the refrigerator machine room is modeled by finite element method, spring elements are added to constructions of the FEmodel for each component and update. To design the grommet of refrigerator, FEmodel must have vibration characteristics of each components such as baseplate, pipe and compressor it self. The modal analyses are conducted to validate suggested approach when the components of machine room are assembled together. And, in this study, optimal design of grommet is conducted to avoid the resonance at the operating frequency of refrigerator. The experimental and FEM result of suggested design showed good agreement and are presented here.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.225-230
• /
• 1996

탄화규소(SiC)가 도포된 핵연료 제조를 위해 고온 연소 합성법(Self-propagating High Temperature Synthesis, SHS)이 적용되었으며, 반응물로 규소(Si) 분말, 규소 박막 (Si-thin film), 흑연 분말과 카본(C) 화이버가 사용되었다. 규소 박막은 프라즈마가 강화된 화학증착법(a microwave pulsed electron cyclotron resonance plasma enhanced chemical vapor deposition)으로 준비되었다. 그 결과 규소와 탄소의 고온 연소 합성반응 생성물은 반응물이 분말이거나 박막에 관계없이. 탄화규소(SiC)가 합성되었으며, 생성물의 형상(morphology)은 초기 탄소의 형상에 의존하였다. 본 연구를 통해 고온 연소 합성법이 탄화규소와 탄소가 도포된 핵연료 제조에 적용 가능함을 알 수 있었다.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2007

This paper presents an INS(Inertial Navigation System) grade, surface micro-machined differential resonant accelerometer(DRXL) manufactured by an epitaxially grown thick poly silicon process. The proposed DRXL system generates a differential digital output upon an applied acceleration, in which frequency transition is measured due to gap dependent electrical stiffness change. To facilitate the resonance dynamics of the electromechanical system, the micromachined DRXL device is packaged by using the wafer level vacuum sealing process. To test the DRXL performance, a nonlinear self-oscillation loop is designed based on the extended describing function technique. The oscillation loop is implemented using discrete electronic elements including precision charge amplifier and hard feedback nonlinearity. The performance test of the DRXL system shows that the sensitivity of the accelerometer is 24 Hz/g and its long term bias stability is about 2 mg($1{\sigma}$) with dynamic range of ${\sigma}70g$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.777-783
• /
• 2007

In this work, a highly integrated downconverter MMIC employing HBT(heterojunction bipolar transistor) was developed for application to one chip tranceiver solution of Ku-band commercial wireless communication system. The downconverter MMIC (monolithic microwave integrated circuit) includes mixer filter. amplifier and input/output matching circuit. Especially, spiral inductor structures employing SiN film were used for a suppression of LO and its second harmonic leakage signals. Concretely, they were properly designed so that the self-resonance frequency was accurately tuned to LO and its second harmonic frequency, and they were integrated on the downconverter MMIC.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.393-399
• /
• 2009

Historically, industrial condition monitoring has been performed by costly hard-wired sensors or infrequent checks by maintenance personnel equipped with hand held monitoring equipment. Self- powered wireless condition monitoring systems provides on-line monitoring of critical plant and machinery providing major operating cost benefits. A vibration energy harvester(VEH) is a device that converts kinetic energy occurred by machine vibration into useable electrical energy. Using VEHs to power wireless monitoring systems can yield significant benefits: increased reliability, lower life time costs and no battery disposal issues, etc. This paper proposes the novel prototype design and manufacturing of a VEH that can eliminate the effect by failed batteries.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.95-100
• /
• 2007

The traction motor for High Speed Train is being required reliability and stability for high-speed operation. And also required low noise level, high performance, compact size owing to the space and weight limitation for attaching to train, etc. As a result of requiring the low noise level and high power capacity, it is adopted forced-air-ventilation insead of self-ventilation that is generally used on electric multiple unit. Traction motor is cooled by cooling air through the air-ventilation hole. When the traction motor is operated with forced-air-ventilation, there is some abnormal noise in the specific RPM. This paper is dealing with the method to reduce the resonance phenomena by adopting the rotor blade.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1389-1390
• /
• 2008

In this paper, a This paper presents the Hilbert curve Fractal Antenna has properties of Self-similarity and Plane-Filling. In case of fractal antenna is very useful to be small and multiple resonant. The antenna has a resonant frequency of 910MHz and 2450MHz base on RFID(Radio Frequency IDentification). In particular, we designed tag antenna by the $4^{th}$ repeat. According to the repeated number of fractal structures, resonance frequency became looking downward. Theses presented Frequency, Such as 910MHz and 2450MHz, at $S_{11}$ is -31dB and -19dB, bandwidth 120MHz and 90MHz to VSWR 2:1.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.125-126
• /
• 2015

통신 시스템에서의 더 늘어난 대역폭(Band Width)의 수요로 인해 집적회로(Integrated Circuit)에서 더 높은 동작 주파수(Operating Frequency)를 필요로 하게 되었다. 고주파 영역에서는 SRF(Self Resonance Frequency) 문제와 소자 값의 정확성(Accuracy)에 대한 문제 때문에 정수소자(Lumped Element)를 이용하여 해석을 할 수 없으며 이로 인하여 어떠한 회로의 전기적 특성을 평가함에 있어서 전송선로(Transmission Line)를 이용하여 해석을 하는 것은 중요한 역할을 하게 되었다. 이러한 해석을 위해 순수한 내부 특성을 얻기 위하여 디 임베딩(De-Embedding)이라는 기법이 사용되고 있으나, 알려진 몇 가지의 방법들은 인터커넥터 부분을 완벽히 나타내지 못한다. 따라서 본 논문에서는 1-Port 측정을 기반으로 한 8-Term Error을 이용한 디 임베딩(De-Embedding) 방법을 이용하여 넓은 주파수 영역에서의 교정 값을 얻는 방법에 대하여 소개하고자 한다.