• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11
• /
• pp.3500-3508
• /
• 2000

In is proposed that the algorithm for self-healing to restoration the backup-VP occurrence error in ATM network. Backup-VP used method is one of the most used algorithm. Most of the problem of backup-VP used algorithm occurts heavily when backup-VP is fault new algorithm is proposed to repair this problem which senup secondary backup-VP. The sccondary gackup-VP algorithm has many disadvantages in mitial setup. That is it requires too manyy calculation. To setile preseribed problem, this thesis proose quality of serviec algorithm to propose of the present problem. Analysis is adopted.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.692-699
• /
• 2008

The purpose of this study was to evaluate the effect of surface treatment on the shear bond strength between new and old composite resin. The prepared resin specimens were separated 6 groups, and each group then received a different surface treatment. Then the repair material was added. Shear bond strengths for repair were measured after 7 days and the results were analyzed by using one way ANOVA. The results were as follows; 1. Group 3, 4(air abrasion) showed significantly higher shear bond strength than Group 1(phosphoric acid)(p<0.05). Group 5, 6(diamond bur) showed higher bond strength than Group 1(phosphoric acid) but not significantly different( p>0.05). 2. Group 2(self-etching adhesive) showed lower shear bond strength than Group 1(phosphoric acid) but not significantly different(p>0.05). 3. There was no statistically significant difference between Group 3(air abrasion) and Group 4(air abrasion+etching). 4. There was no statistically significant difference between Group 5(diamond bur) and Group 6(diamond bur+etching). In conclusion, the surface treatment with air abrasion resulted in higher repair bond strength than other methods. Repair bond strength was not significantly affected by acid etching.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.233-239
• /
• 2013

This study is interested in manufacturing the self-cleaning silicate concrete surface impregnant including tetra ethyl ortho silicate, lithium silicate for the repair of the exposed concrete surface and the color concrete requiring the advanced function in view of the concrete appearance. The concrete surface layer change and static contact angel was tested for the review of application. The result of this study shows that the effective silicate is tetra ethyl ortho silicate and lithium silicate. The adhesion in tension is satisfied with performance requirement of KS standard but the reinforcement of concrete substrate is slight. So, The self-cleaning silicate concrete impregnant of this study is more desirable for the improvement of durability rather than the reinforcement.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.501-511
• /
• 2009

This study was conducted to develop self-healing ability of concrete so that inspection could be available even in the event of minute cracks without complex works at any time for more economic concrete structure maintenance and longevity. A completely different method has been carried out in comparison with many of similar researches on self-healing concrete. This is a basic study on the development of self-healing concrete using microbial biomineralization. Compounds were generated except for cells by precipitation reaction of CaC$O_3$ during the microbial metabolism and we examined the use as a binder that hardens the surface of sand using biomineralization that Sporosarcina pasteurii precipitates CaC$O_3$. In result, the formation of new mineral and hardening of sand surface could be verified partly, and it was available for cracks to be repaired by calcite with organic (microorganism) and inorganic (CaC$O_3$) complex structure through the basic experiment a little bit. Therefore the use of biomineralization by this sort of microbial metabolism for concrete structure helps to develop absolute repair-concrete like this concrete with microorganism. The effect of microbial application will be one of the most important research tasks having influence on not only repair for concrete structure but also development of new materials able to reduce environmental problems.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.808-818
• /
• 2013

Programmable memory built-in self-test (PMBIST) is an attractive approach for testing embedded memory. However, the main difficulties of the previous works are the large area overhead and low flexibility. To overcome these problems, a new flexible PMBIST (FPMBIST) architecture that can test both single-port memory and dual-port memory using various test algorithms is proposed. In the FPMBIST, a new instruction set is developed to minimize the FPMBIST area overhead and to maximize the flexibility. In addition, FPMBIST includes a diagnostic scheme that can improve the yield by supporting three types of diagnostic methods for repair and diagnosis. The experiment results show that the proposed FPMBIST has small area overhead despite the fact that it supports various test algorithms, thus having high flexibility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.202-206
• /
• 2012

In this paper, we proposed on the direction of self-repairing mimicking the cell on the digital system design. Three-dimensional array of cells rather than using the original structure of FPGA, an array of blocks for efficient error detection methods were investigated. With a certain regularity, so the design method in detail by dividing the full array. The digital circuits can be detected fault location easily and quickly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1306-1311
• /
• 2012

In this paper, we proposed on the direction of self-repairing mimicking the cell on the digital system design. Three-dimensional array of cells rather than using the original structure of FPGA, an array of blocks for efficient error detection methods were investigated. With a certain regularity, so the design method in detail by dividing the full array. The digital circuits can be detected fault location easily and quickly.

• Journal of Trauma and Injury
• /
• v.33 no.2
• /
• pp.134-137
• /
• 2020

Here we present a 43-year-old man who was brought with a self-inflicted cut throat injury; 18 hours after the suicidal attempt. On examination a deep 12 cm cut at the level of the hyoid bone exposing the posterior pharyngeal wall was seen. Emergency surgery with primary repair, tracheostomy and feeding gastrostomy was done. Post-operative period was uneventful and patient recovered without any speech or swallowing abnormalities. Through this article we would like to stress that even in cases of frightening ghastly wounds, by maintaining simple surgical principles we can achieve good outcomes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.198-201
• /
• 2003

The R.C Building will be superannuated as time passes. This program is generated by propagation of cracks. In order to manage such cracks, time and efforts, expense, etc. are required. In this study, glass sensors were embedding in a model beam and column and leakage of fluorescence and adhesive material was investigated. Further, currents in glass pipe were observed to find the leakage of liquid in glass pipes. Progressive cracks generated by cause the fracture of glass pipes. Therefore, the liquid become to flow and electric current stops, and the cracked part of the member can be found easily. Moreover, the adhesive delays progressive cracking system that responds in air, and the life of a structure can be made to extend. The purpose of this research is to develop of low price sensors that can perform of self-diagnosis in addition to ability of concrete repair concrete to damage.

• Journal of Sensor Science and Technology
• /
• v.19 no.2
• /
• pp.124-129
• /
• 2010

For the industrial printing applications, the stability of the piezo-driven inkjet printhead is a major requirement. In this paper, we focused on the failure modes of the inkjet printhead and realized a method to detect and repair them at high speed. The printhead monitoring is performed by detecting the residual vibration of the actuating plate using the self- sensing capability of the piezoelectric material. To measure the channel acoustics and to identify the malfunctioning nozzle, we devised the bridge sensing circuitry and failure detection algorithm. The residual vibration signals can be affected by the boundary conditions of the channel acoustics, so it is possible to identify the failure causes by analyzing the monitoring signals. Therefore it is also possible to apply a proper restoring process to the defective printhead. The experimental results show that this method is effective in improving the reliability of the industrial printing.