• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.627-643
• /
• 2015

Negative stiffness, previously emulated by active or semi-active control for cable vibration mitigation, is realized passively using a self-contained highly compressed spring, the negative stiffness device (NSD).The NSD installed in parallel with a viscous damper (VD) in the vicinity of cable anchorage, enables increment of damper deformation during cable vibrations and hence increases the attainable cable damping. Considering the small cable displacement at the damper location, even with the weakening device, the force provided by the NSD-VD assembly is approximately linear. Complex frequency analysis has thus been conducted to evaluate the damping effect of the assembly on the cable; the displacement-dependent negative stiffness is further accounted by numerical analysis, validating the accuracy of the linear approximation for practical ranges of cable and NSD configurations. The NSD is confirmed to be a practical and cost-effective solution to improve the modal damping of a cable provided by an external damper, especially for super-long cables where the damper location is particularly limited. Moreover, mathematically, a linear negative stiffness and viscous damping assembly has proven capability to represent active or semi-active control for simplified cable vibration analysis as reported in the literature, while in these studies only the assembly located near cable anchorage has been addressed. It is of considerable interest to understand the general characteristics of a cable with the assembly relieving the location restriction, since it is quite practical to have an active controller installed at arbitrary location along the cable span such as by hanging an active tuned mass damper. In this paper the cable frequency variations and damping evolutions with respect to the arbitrary assembly location are then evaluated and compared to those of a taut cable with a viscous damper at arbitrary location, and novel frequency shifts are observed. The characterized complex frequencies presented in this paper can be used for preliminary damping effect evaluation of an adaptive passive or semi-active or active device for cable vibration control.

• International Journal of Advanced Culture Technology
• /
• v.5 no.1
• /
• pp.90-97
• /
• 2017

Nowadays, the most of commercial buildings are build-out with complex architecture and decorated with more complicated interiors of buildings so establishing intelligible escape routes becomes an important case of fire or other emergency in a limited time. The commercial buildings are already equipped with multiple exit signs and these exit signs may create confusion and leads the people into different directions under emergency. This can jeopardize the emergency situation into a chaotic state, especially in a complex layout buildings. There are many research focused on implementing different approached to improve the exit sign system with better visual navigating effects, such as the use of laser beams, the combination of audio and video cues, etc. However the digital signage system based emergency exit sign management is one of the best solution to guide people under emergency situations to escape. This research paper, propose an intelligent evacuation route GUIDE that uses the combination centralized Wireless Sensor Networks (WSN) and digital signage for people safety and avoids dangers from emergency conditions. This proposed system applies WSN to detect the environment condition in the building and uses an evacuation algorithm to estimate the safe route to escape using the sensor information and then activates the signage system to display the safe evacuation route instruction GUIDE according to the location the signage system is installed. This paper presented the prototype of the proposed signage system and execution time to find the route with future research directions. The proposed system provides a natural intelligent evacuation route interface for self or remote operation in facility management to efficiently GUIDE people to the safe exit under emergency conditions.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5568-5587
• /
• 2018

This research uses artificial intelligence methods for computer network intrusion detection system modeling. Primary classification is done using self-organized maps (SOM) in two levels, while the secondary classification of ambiguous data is done using Sugeno type Fuzzy Inference System (FIS). FIS is created by using Adaptive Neuro-Fuzzy Inference System (ANFIS). The main challenge for this system was to successfully detect attacks that are either unknown or that are represented by very small percentage of samples in training dataset. Improved algorithm for SOMs in second layer and for the FIS creation is developed for this purpose. Number of clusters in the second SOM layer is optimized by using our improved algorithm to minimize amount of ambiguous data forwarded to FIS. FIS is created using ANFIS that was built on ambiguous training dataset clustered by another SOM (which size is determined dynamically). Proposed hybrid model is created and tested using NSL KDD dataset. For our research, NSL KDD is especially interesting in terms of class distribution (overlapping). Objectives of this research were: to successfully detect intrusions represented in data with small percentage of the total traffic during early detection stages, to successfully deal with overlapping data (separate ambiguous data), to maximize detection rate (DR) and minimize false alarm rate (FAR). Proposed hybrid model with test data achieved acceptable DR value 0.8883 and FAR value 0.2415. The objectives were successfully achieved as it is presented (compared with the similar researches on NSL KDD dataset). Proposed model can be used not only in further research related to this domain, but also in other research areas.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.99-108
• /
• 2021

Recently, unexpected and more advanced cyber medical treat attacks are on the rise. However, in responding to various patterns of cyber medical threat attack, rule-based security methodologies such as physical blocking and replacement of medical devices have the limitations such as lack of the man-power and high cost. As a way to solve the problems, the medical community is also paying attention to artificial intelligence technology that enables security threat detection and prediction by self-learning the past abnormal behaviors. In this study, there has collecting and learning the medical information data from integrated Medical-Information-Systems of the medical center and introduce the research methodology which is to develop the AI-based Net-Working Behavior Adaptive Information data. By doing this study, we will introduce all technological matters of rule-based security programs and discuss strategies to activate artificial intelligence technology in the medical information business with the various restrictions.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.12
• /
• pp.549-564
• /
• 2017

Not only services that are provided by a single system have been various with the development of the Internet of Things and autonomous software but also new services that are not possible before are provided through collaboration between systems. The collaboration between autonomous systems is similar to the ecosystem configuration in terms of biological viewpoints. Thus, it is called the IT Ecosystem, and this concept has arisen newly in recent years. The IT Ecosystem refers to a concept that achieves a mission of each of a number of heterogeneous systems rather than a single system utilizing their own autonomy as well as achieving the objectives of the overall system simultaneously in order to meet a single common goal. In our previous study, we proposed architecture of elementary level and as well as basic several meta-models to implement the IT Ecosystem. This paper proposes comprehensive reference architecture framework to implement the IT Ecosystem by cleansing the previous study. Among them, a utility function based on cost-benefit model is proposed to solve the dynamic re-configuration problem of system components. Furthermore, a measure of using genetic algorithm is proposed as a solution to reduce the dynamic re-configuration overhead that is increased exponentially according to the expansion of the number of entities of components in the IT Ecosystem. Finally, the utilization of the proposed orchestration framework is verified quantitatively through probable case studies on IT Ecosystem for unmanned forestry management.

• Korean Journal of Environment and Ecology
• /
• v.32 no.4
• /
• pp.425-439
• /
• 2018

W investigated the environmental factors and inhabiting biota such as macrophytes and zooplankton in 43 sites located on Jeju Island from May and June 2017 to evaluate the spread and ecosystem risk of dotted duckweed (landoltia punctata) which was recently found for the first time in Jeju Island. Dotted duckweeds were found in a total of 18 sites which tended to show low biomass of aquatic macrophyte species other than the dotted duckweed. We conducted a pattern analysis using SOM (Self-Organizing Map), which extracts information through competitive and adaptive properties, to analyze the effect of inhabiting biota on aquatic macrophytes such as the dotted duckweed and environmental factors. The SOM analysis showed that the inhabiting biota such as the zooplankton affected the biomass of aquatic macrophytes than they did the environmental factors. In particular, the biomass of dotted duckweed was positively related to plant-attached species (Alona, Chydorus, and Pleuroxus). Considering that low density of aquatic macrophytes covers the streams and wetlands on Jeju Island because of irregular water source and sharp change of water depth, the dotted duckweeds are likely to play an essential role as the vital habitat for micro-biota including zooplankton in wetlands and streams on Jeju Island. Furthermore, considering that organic matters are utilized as the primary food source in the areas occupied by dotted duckweed, dotted duckweeds have the role of being both habitat and food source. Although the dense growth of dotted duckweed adversely affects growth and development of some aquatic plants due to the shadow effect, it is due to the dominance of floating plants on the water surface should not be regarded as the risk of the dotted duckweed. In conclusion, the dotted duckweeds have spread and settled in most of the water systems on Jeju Island, their impact on inhabiting biota and the aquatic environment was minor. It is necessary to monitor the distribution and spread of dotted duckweeds in the inland areas outside of Jeju Island in the future.