• Title/Summary/Keyword: Self contact

검색결과 648건 처리시간 0.024초

$TiB_2$ SHS 및 직접 접촉가열에 의한 동시 가압법 : 온도분포 모델링 및 공급에너지와 치밀화 관계 (Simultaneous Consolidation of Titanium Diboride with Self-Propagating High-Temperature Synthesis, Direct Contact-Heating, and Pressure: Modeling of Temperature Distribution and the Relationship between Applied Energy and Densification)

  • 정진근;조건;이형복
    • 한국세라믹학회지
    • /
    • 제32권7호
    • /
    • pp.817-824
    • /
    • 1995
  • TiB2 was simultaneously synthesized and densified with concurrent self-propagating high-temperature synthesis and direct contact-heating by electrcial power input and pressure. Density of TiB2 synthesized by self-propagating high-temperature synthesis and consolidated simultaneously by direct contact-heating and pressure was maximum 80% of the theoretical density (4.52g/㎤). Temperature profile was analyzed by solving heat balance equation with numerical method (FTCS method). The temperature of the sample was sufficiently raised to that temperature sufficient to be densified. It was ascertained that the density of the SHS synthesized TiB2 is exponentially proportinal to the input thermal energy per mass.

  • PDF

Effect of self-assembled monolayer and aluminum oxide ALD film on a PMMA substrate

  • Shin, Sora;Park, Jongwan
    • Journal of Ceramic Processing Research
    • /
    • 제19권6호
    • /
    • pp.525-529
    • /
    • 2018
  • The antireflective (AR) coated poly methyl methacrylate (PMMA) substrate was deposited by atomic layer deposition (ALD) on a self-assembled monolayer (SAM) to improve hydrophobicity and mechano-chemical properties of organic thin films. The water contact angles (WCA) were tested to characterize the surface wettability of SAM octadecyltrichlorosilane (OTS) films. Results showed that a contact angle of $105.9^{\circ}$ was obtained for the SAM films with an annealing process, and the highest WCA of $120^{\circ}$ was achieved for the films prepared by the SAM and ALD multi-process. The surface morphology of the SAM films with different assembly times and varying number of ALD cycles was obtained by atomic force microscopy (AFM). The maximum light transmittance for the SAM films on the PMMA substrate reached 99.9% at a wavelength of 450 nm. It was found that the SAM surfaces were not affected at all by the ALD process.

국내 해상풍력발전단지에서의 바이오파울링에 대한 연구 (Study of biofouling in Korea offshore wind farms)

  • 채윤석;김호민;김지형;이성훈
    • 풍력에너지저널
    • /
    • 제14권4호
    • /
    • pp.43-49
    • /
    • 2023
  • We have studied biofouling in Korea's offshore wind farms by using image analysis through monitoring and surface energy analysis. To observe the biofouling characteristics, samples were fabricated using Micron extra 2 and PropOne, which have a self-polishing property, and Hempathane HS 55610, which is used in substructure coatings. The manufactured samples were installed at the bottom of a ladder in a substructure, and monitored for 10 months. The most biofouling occurred in the sample without the self-polishing property, and algae, barnacles and corallinales were observed. The surface energy analysis used the Owens-Wendt-Rabel and Kaelble (OWRK) model, which uses the contact angles of two standard fluids. As a result of calculating the surface energy using contact angle measurement, the sample without the self-polishing property showed the highest value. This result was consistent with the biofouling incidence observed through monitoring.

Effect of length of alkyl chain consisting of fluorine and carbon in self-assembled monolayers

  • Park, Sang-Geon;Lee, Won Jae;Lee, Won Jae;Kim, Tae Wan
    • Journal of Ceramic Processing Research
    • /
    • 제19권5호
    • /
    • pp.361-368
    • /
    • 2018
  • We investigated the interfacial properties of fluorocarbon self-assembled monolayers (FC-SAMs) with different alkyl chain lengths. It was found that the substrate characteristics were changed rapidly with the fabrication time and temperature of the SAM. FC-3SAM, which has the shortest alkyl chain in this study, showed a contact angle of $54.1^{\circ}$ when it was fabricated in an electric oven at $60^{\circ}C$ for the first minute. The FC-3SAM showed a contact angle of up to $76.9^{\circ}$ when it was fabricated in an electric oven at the same temperature condition for 180 minutes. FC-10SAM, which has the longest alkyl chain in this study, showed a contact angle of $64.7^{\circ}$ when it was fabricated at a temperature condition of $60^{\circ}C$ for 1 minute, and a contact angle of $98.7^{\circ}C$ at a temperature condition of $60^{\circ}C$ for 180 minutes. It was found that the FC-10SAM shows an increased contact angle and hydrophobic properties due to a well-aligned molecular structure resulting from a strong van der Waals force. In contrast, the FC-3SAM shows a small contact angle due to the intermolecular disorder resulting from a weak van der Waals force. The average roughness of FC-SAMs was investigated using AFM. The surface roughness of FC-SAMs, which verifies the results of contact angle, was confirmed. At a fabrication time of 120 minutes, the FC-10SAM showed an improvement in average roughness by 62% compared to that of FC-3SAM due to its good alignment.

이성교제를 하는 십대여학생의 성접촉과 자아존중감.자기주장의 관계 (Relationship between the level of Sexual Contacts and Self-Esteem, Self-Assertiveness of Teenage Girls Who Have or Had Boyfriends)

  • 이선경
    • 여성건강간호학회지
    • /
    • 제7권2호
    • /
    • pp.212-228
    • /
    • 2001
  • This is a cross-sectional descriptive correlation study that aimed to understand the relationship between the level of sexual contacts during the dates and psycho-social factors in teenage girls who have or had boyfriends. The purpose of this study was to describe the relationship between sexual contacts and self-esteem and self- assertiveness. The subjects of the study were 6,130 teenage girls who have or had boyfriends. They were selected convienently 12,733 teenage girls from 254 secondary schools located in 7 large cities and 9 provinces in Korea. A structured questionaire was used it included items one general characteristics, the levels of sexual contacts, self-esteem and self-assertiveness. Seven levels of sexual contacts were rated they were holding a hand, putting arms around each other's shoulders, kiss, french kiss, touching breast, petting genitalia, and sexual intercourse during the dates. Self-esteem and self-assertiveness were measured by the "Self-esteem scale" of Rogenberg (1971) and the questionaires developed by S. B. Chang et al(2000), respectively. The self-reported questionaires were collected from October 2, to October 28, 2000 and analyzed by using SPSS 10.0 Program. The data were analyzed by descriptive statistics, reliability, One-way ANOVA with Duncan method & Scheffe method. The results of the analysis were as follows. 1.An average Percentage of the respondents who have (46.1%) or had (53.9%) boyfriends was 48.1% (n=6,130) and the most common sexual contact during the dates was french kiss (26.7%, n=1,634). While 7.5%(458) of respondents had a sexual intercourse, 13.7%(842) of respondents didn't have any sexual contact during the dates. 2. Distribution of starting point of the first sexual contact demonstrates that 1,950 respondents (31.8%) held partner's hand at the first date and 1,367 respondents (22.3%) put arms around each other's shoulders at the 2nd or 3rd date. Sexual contacts such as kiss, french kiss, touching breast, petting genitalia, or sexual intercourse were experienced mostly at the later than the 10th date. However, surprisingly large number(1.7%) of respondents had genital contact and sexual intercourses at the first date. 3. The means of self-esteem and self-assertiveness socres of the respondents who have or had boyfriends are 27.43$({\pm}4.03)$ and 17.96$({\pm}2.55)$, respectively. The range of scores for self esteem was 10-40, 40 with most self esteem. The range of scores for self assertiveness was 7-21, 21 with most self assertiveness. 4. As sexual contacts proceeded, the means of self-esteem and self-assertiveness values decreased. In detail, the respondents having no or light sexual contacts (kiss, putting arms around each other's shoulder, holding a hand) had similar self-esteem values($p{\leq}0.05$). However, ones having relatively intensive sexual contacts (french kiss, touching breast) showed significantly lower self-esteem values($p{\leq}0.05$). Same trend has been obtained for self-assertiveness value. 5. The higher values of self-esteem and self-assertiveness values the respondents had, the later they started the moderate sexual contact (kiss, french kiss) during the dates. Interestingly, among the respondents having intensive sexual contacts (petting genitalia, sexual intercourse) during the dates, those who experienced the such contacts at the first date or later than 10th date have higher self-esteem and self-assertiveness values than one experienced the such contacts during the 2nd$\sim$9th dates, giving U-shape curve. 6. There was a significant relationship between self-esteem and self-assertiveness in girls who have or had boyfriends($P{\leq}.001$). In conclusion, the research shows that self-esteem and self-assertiveness values are significantly related with the sexual contacts of the teenage girls who have or had boyfriends. These results strongly suggest that proper sex education program for teenage girls should contain the program on improving the self-esteem and self-assertiveness. We believe that sex education program is the one of the best ways to prevent the unwanted sexual contacts and pregnancy of teenage girls.

  • PDF

실직노숙자의 자아존중감, 우울 및 희망에 관한 연구 (A Study on Self-esteem, Depression, and Hope of Unemployed Homeless)

  • 김현미;최연희
    • 지역사회간호학회지
    • /
    • 제13권1호
    • /
    • pp.171-181
    • /
    • 2002
  • Purpose: To provide the basic data for nursing intervention to improve the psychosocial adaptation of unemployed homeless by examining the degree of self-esteem, depression. and hope, and the relation of these variables. Method: The subjects were a volunteer sample of 218 unemployed homeless residing at 2 shelters in Seoul and Suwon, Korea. The instruments for this study were Rosenberg's self-esteem scale, Beck's depression inventory, and Miller and Powers's hope scale. Using the SPSS program, the data were analysed by frequency, percentage, t-test, ANOVA, Duncan test and Pearson Correlation Coefficient. Result: 1) The degree of self-esteem is, on average, 23.72 points, depression is 24.41 points, and hope is 124.72 points. 2) The degree of self-esteem in the general characteristics of the subjects showed a significant difference by age, marital status, and contact with family. 3) The degree of depression in the general characteristics of the subjects showed a significant difference by age, marital status, and contact with family. 4) The degree of hope in the general characteristics of the subjects showed a significant difference by contact with family. 5) There was a significant positive correlation between the variables of self-esteem and hope, while there was a significant negative correlation between the variables of self-esteem and depression, and hope and depression. Conclusion: 1) The study identifies psychological characteristics of the homeless. 2) It is required not only to develop nursing intervention programs to improve the degree of self-esteem and hope, and alleviate depression but also to testify the effect of the program. 3) It is needed to develop nursing intervention programs to prevent chronic homelessness.

  • PDF

자기-아핀 표면 특성을 고려한 유기탄성체 복합재료 마찰 이론 및 타이어 트레드/노면 마찰 응용 (Sliding Friction of Elastomer Composites in Contact with Rough Self-affine Surfaces: Theory and Application)

  • 윤범용;장윤진;김백환;서종환
    • Composites Research
    • /
    • 제36권3호
    • /
    • pp.141-153
    • /
    • 2023
  • 본 리뷰 논문에서는 일반 접촉 역학 이론과 더불어 유기탄성체 마찰에 관한 이론 및 배경을 소개한다. 특히 Greenwood & Williamson 접촉 역학 이론을 확장하여 거친 표면을 자기-아핀(self-affine) 특성으로 고려한 접촉 역학 및 마찰의 수학적 모델을 제시한 Klüppel & Heinrich 이론을 중심으로 유기탄성체 복합재료의 마찰 거동에 대해 살펴본다. 자기-아핀 특성에 의한 노면의 멀티스케일 거칠기로 인해 미끄러짐 마찰 시 유기탄성체 복합재료는 다양한 주파수에 따른 동적 변형이 가해지며 이때 재료가 나타내는 점탄성이 마찰 거동에 주요한 영향을 미친다. 따라서 유기탄성체 복합재료의 비선형 점탄성을 고려하여 광범위한 주파수 영역에서의 점탄성 거동인 마스터커브를 구축하는 원리 및 방법을 제시하였다. 마지막으로 유기탄성체 복합재료 마찰 이론을 타이어 트레드 컴파운드와 노면 간의 마찰에 응용한 실험적 결과와 그 물리적 의미를 이론과 접목하여 설명하였다.

프랙탈 표면을 가진 공구와 재료의 마이크로 접촉거동해석 (Microcontacting behaviour of material with fractal rough surface)

  • 김영석;현상일
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2009년도 추계학술대회 논문집
    • /
    • pp.33-37
    • /
    • 2009
  • Finite-element methods are used to study non-adhesive, frictionless rough contact of elastic and plastic solids. Roughness on spherical surfaces is realized by self-affine fractal. True contact area between the rough surfaces and flat rigid surfaces increases with power law under external normal loads. The power exponent is sensitive to surface roughness as well as the curvature of spherical geometry. Surface contact pressures are analyzed and compared for the elastic and plastic solids. Distributions of local contact pressure are shown dependent on the surface roughness and the yield stress of plastic solids.

  • PDF

3종의 자가부식 프라이머의 상아질계면 접촉각 및 미세인장결합강도에 관한 연구 (Measurement of Contact Angle and Bond Strength Using 3 Different Self-Etching Primer)

  • 장석우;권호범;유현미;박동성;오태석;배광식
    • 구강회복응용과학지
    • /
    • 제24권1호
    • /
    • pp.105-112
    • /
    • 2008
  • 본 연구의 목적은 3종의 자가부식 프라이머(Clearfil SE Bond, AdheSE, Tyrian) 사용시 상아질계면의 접촉각 및 미세인장결합강도를 측정하는 것이다. 연마된 상아질 표면에 3종의 자가부식 프라이머를 각각 적용한 후 접촉각을 측정하였으며 (n=30), One-way ANOVA를 사용하여 통계처리하였다. 미세인장결합강도측정을 위해서는 상아질 표면에 3종의 자가부식 프라이머 및 상아질 접착제를 각각 적용한 후 광중합 복합레진 (Z 250)을 5mm 두께로 쌓아 올렸다. 그 후 각 시편을 결합계면에 수직으로 분할한 뒤 (n=45) universal testing machine을 사용하여 미세인장강도를 측정하였고, Kruskal-Wallis test를 통하여 통계처리하였다. 접촉각 측정결과, AdheSE, Clearfil SE Bond, Tyrian 순으로 높은 접촉각을 보였으며 각 군간 통계적 유의성 있는 차이를 보였다 (p<0.05). 미세인장결합강도 측정결과 Clearfil SE Bond군과 AdheSE군은 유의성 있는 차이를 보이지 않았으며, Tyrian군은 Clearfil SE Bond 군이나 AdheSE 군에 비해 유의성 있게 작은 미세인장결합강도를 보였다.