• Korean Journal of Medicinal Crop Science
• /
• 제18권2호
• /
• pp.74-78
• /
• 2010

This experiment was carried out to select suitable organic matter in To-jik nursery (self soil nursery) for complement To-jik nursery's defects that are deterioration of raw material by poor quality of seed ginseng and reduction of the quantity in seed ginseng production. Organic matter used were Yacto, rice bean, defatted rice bran, soybean cake and their mixture. As follows, bulk density in soil physical property by treating organic composts was the greatest in soybean cake and the next was followed by mix, Yacto, defatted rice bran, and rice bran treatment in order. Soil pore space ratio was totally the opposite; that was rice bran the first and followed by defatted rice bran, Yacto, mix and soybean cake treatment. The incidence rate of damping off by treating organic composts was 1.5% in both soybean cake and mix while the others was 1.0%. Emergence time was the same among treatment on April 16 and Emergence rate was the highest at 73% in Yacto. There was no significant differences among treatment in the growth of aboveground part but it was a little better in defatted rice bran treatment. In Yacto treatment, the growth of underground part, total root number per kan, rate of first grade ginseng seedling, and rate of usable ginseng seedling etc. were entirely higher but there was little differences. Using defatted rice bran was slightly lower in productivity compared to Yacto, but the possibility was high as a alternative for Yacto in a view of managing cost down.

• Journal of Korean Society of Rural Planning
• /
• 제24권1호
• /
• pp.113-127
• /
• 2018

This study comprehends that the landscape of Ipsan Village is the accumulated output of the landscape management and social behavior by the historic personages through the reference research and field surveys. And the study sorted out the over-layered landscape characteristics of Ipsan Village by analyzing the dispersed landscape elements as follows. First, right before the start of Japanese invasions to Korea(1592-98), Tamjin(耽津) An(安) Family moved into Ipsan and started establishing the a single clan village. At a site with mountain background and facing the water(背山臨水), the village used to be a typical farming one with an organically planned road-system and housing area following the traditional order. However, the landscape has changed drastically since the 20th century with the construction of banks, roads and readjustment of arable land etc. Second, the original landscape, which can be figured out through the 'Gosanjaesibyukgyeong(高山齋十六景)' in the 18th century, shows its harmony with natural landscape: mountain & valley, stream & field, traditional trees, etc, cultural landscape: village, well, spring, etc, and momentary landscape: seasons, time, weather phenomena, sound, behavior, etc. Third, based on the second, 16 natural landscape elements: mountain & stream, planting, etc. and 25 cultural landscape elements: housing spaces, self-cultivation & ceremony spaces, community spaces and modern education & enlightenment spaces were selected and interpreted as landscaping meanings. Fourth, the over-layered landscape which stems from the compositive functions and inter-connectivity of landscape elements which consists Ipsan Village is regarded as 'Natural geographical and Fungsu landscape', 'Rural production and livelihood landscape', 'Confucian ceremony and symbolic landscape' and 'Modern education and enlightenment landscape.'

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제9권1호
• /
• pp.73-86
• /
• 1999

This study was performed to find out factors affecting degree of satisfaction with workers' working environment. The study subjects were 165 workers who were working at painting process of twelve furniture manufacturing factories in Incheon area. We used self-administered questionnaire containing general characteristics, working conditions, the degree of satisfaction with working environment, and the degree of satisfaction with working condition. In addition, we measured the exposure levels of occupational hazardous agents. The results were as follows; 1. Correlations between the degree of satisfaction with workers' working environment and the measured of occupational hazardous agents did not affect the degree of satisfaction with workers' working environment. 2. Factors affecting the degree of satisfaction with workers' working environment were not the exposure levels of occupational hazardous agents, but the degree of satisfaction with working condition, size of industry, health status, and types of ventilation system. As the degree of satisfaction with working condition was increased, the degree of satisfaction with working environment was increased. Also, for the workers who had good health status, the degree of satisfaction with work environment was appeared to be high. To increase the degree of satisfaction, with workers' working environment, firstly, effective work management and production control are required. Also, the worker's effort to negotiate continuously with top manager on improving working conditions is required. Secondly, developing heath promotion program to be appropriate for the characteristics of worksite is required. Moreover, leading worker's participation in health promotion program is very important to increase the degree of satisfaction with workers' working environment.

• Journal of Society of Preventive Korean Medicine
• /
• 제9권1호
• /
• pp.1-16
• /
• 2005

This study was conducted to identify the needs of introducing new medical specialties in oriental medicine. Three stakeholders in introducing new oriental medical specialties are oriental medical doctors, policy makers and medical consumers. Of the three, this study intended to focus on opinions of oriental medical doctors. About 1,150 self-administered questionaries were sent to the potential respondents, 320 specialists, 250 interns & residents and 580 private oriental medicine practitioners, and 480 doctors responded. The study revealed that 62% of respondents showed negative attitudes towards the introduction of new oriental medicine specialties. The private oriental medical practitioners were more likely not in favor of adding new medical boardmanship. The reasons of objection were as follows : First, it is more important to enrich the existing oriental medical boardmanship (70%). Second, the newly established specialties are most likely to be weakened(15%). The study revealed that the first and most likely specialties to be introduced was Chuna(18%), subspecialization of oriental internal medicine (15.8%), the next oriental family medicine (15.1%) and so on. And the second specialties to be desired most by the respondents were (1) cooperative medicine between the westem and oriental medicine (28%), (2) oriental preventive medicine (17.4%) and (3) oriental family medicine (16.8%). Caution must be exercised in introducing new oriental medicine specialties. The failures of western medicine in the operation of its specialist production should carefully by examined here.

• Journal of Fashion Business
• /
• 제1권1호
• /
• pp.99-109
• /
• 1997

The purpose of this study is to survey the conditions of women's wears manufacturing industries and finds out their qualitative problems and suggests the solutions to help women's wears manufacturing industries adapting themselves well to the fashion industries which is being individualized, high profiled and differentiated and thus helpes them to produce the competitive commodities through high-qualities and technological improvements. For this purpose, I had sampled the factories which located in Seoul and Kyunggido areas and produced women's apparels for domestic consumers. The questionnaires for this survey were designed by interviewing the representatives of 31 women's wears manufacturing industries, while the collected data were processed using the SAS statistical program for frequency, percentage, chi-square test, t-test. The results of the survey can be summarized as follows; 1. It was found that women's wears manufacturing industries were getting smaller scale or pettier in terms of capital, number of employees or scale of factory. 2. The number of the employees is getting decrease every year, which is posed as most serious problems of the surveyed manufacturer. Such a decrease of employees may be attributable to the fact that women's wears manufacturing industries are regarded as one of 3D businesses and therefore the employees leave their workspaces for more rewarding service industries. 3. It was found that women's wears manufacturing industries relied on more recontracts than self-productions. In 1995, 83.7% of their productions were out of recontracts, and this rate is getting increase. 4. 51.6% of the surveyed manufacturer operate by straight line system or other types of line system, while 48.4% of the remaining managed a pair system. 5. As a result of surveying the perspective of women's wears manufacturing industries into the 21 st century is as followed. 41.9% of them were optimistic, and 25.8% were pessimistic about their futures.

• Journal of Photoscience
• /
• 제1권2호
• /
• pp.135-141
• /
• 1994

Elevated near-UV radiation, containing a large amount of UV-B and a small amount of UV-C, inhibited the development of leaves and tillers, the increase in biomass production, the elongation of plant height, the photosynthetic rate and the chlorophyll content in rice plants in a phytotron. Elevated UV-B radiation filtered through cellulose diacetate film or UV-31 cut filter (transmission down to 290 nm) similarly suppressed each growth component above. Near-UV radiation-caused injuries were alleviated either by elevated CO$_2$ atmosphere or by exposure to high irradiance-visible radiation. On the basis of these findings, we examined cultivar differences in the resistance to UV radiation-caused injuries among 198 rice cultivars belonging to 5 Asian rice ecotypes ( aus, aman, boro, bulu and tjeleh) from the Bengal region and Indonesia and to Japanese lowland and upland rice groups. It was shown that .various cultivars having different sensitivities to the effects of near-UV radiation were involved in the same ecotype and the same group, and that the Japanese lowland rice group and the boro ecotype were more resistant. Among Japanese lowland rice cultivars, Sasanishiki (one of the leading varieties in Japan) exhibited more resistance to near-UV radiation, while Norin 1 showed less resistance, although these two cultivars are closely related. It was thus indicated that the resistance to the inhibitory effects of near-UV radiation of rice cultivars is not simply due to the difference in the geographical situation where rice cultivars are cultivated. From the genetic analysis of resistance to the inhibitory effects of UV radiation on growth of rice using F$_2$ plants generated by reciprocally crossing Sasanishiki and Norin 1 and F$_3$ lines generated by self-fertilizing F$_2$ plants, it was evident that the resistance to the inhibitory effects of elevated near-UV radiation in these rice plants was controlled by recessive polygenes.

• Korean Journal of Veterinary Service
• /
• 제34권1호
• /
• pp.5-12
• /
• 2011

Infectious bursal disease (IBD) caused by infectious bursal disease virus (IBDV) is a highly contagious viral disease in chicken. It causes heavy economic loss by immune suppression and high mortality. The IBDV, designated Avibirnavirus in the Family Birnaviridae, has a double-stranded RNA genome formed by two segments, segment A and segment B. Segment A encodes a 108 KDa polypeptide that is self-cleaved to produce pVP2, VP3 and VP4, and later pVP2 is cleaved to VP2. The VP2 contains the antigenic regions responsible for elicitation of neutralizing antibodies and VP3 is a major immunogenic protein of IBDV. In this study, monoclonal antibodies (MAbs) specific for IBDV were produced and characterized. All 15 MAbs were specific for IBDV and did not react with other viruses used in this study. The protein specificity of MAbs was determined by comparing the reactivity patterns of each MAb with IBDV VP2 and VP234 recombinant baculoviruses and Western blot analysis. As a result, 7 MAbs (1F5, 2C8, 2F4, 3C7, 4C3, 6F11, 6G5) and 5 MAbs (2A4, 2G2, 3F5, 3G2, 4F10) were specific for VP2 and VP3, respectively. The protein specificity of 3 MAbs (2B8, 3F7, 3F8) were not determined. Five (2C8, 2F4, 4C3, 6F11, 6G5) of the VP2-specific MAbs had a neutralizing activity against IBDV. Some MAbs reacted with IBDV-infected bursa of Fabricius by indirect fluorescence antibody (IFA) and immunohistochemistry (IHC) assay. The MAbs produced in this study would be used for diagnostic reagents for the detection of IBDV infection.

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.9-13
• /
• 2000

Wood demand is increasing more and more, but world has been confronted with decreasing forest resources. Korea has to depend upon foreign wood and wood-based products for more than 95 percent of total domestic demand per year. In order to heighten self-sufficiency for wood supply and demand, we have to develop wood substitutes. Rice hull is the cheapest agricultural by-product we can get in Korea, more over the production of rice hull amounts to 1 million tons per year. This study was carried out to utilize rice hull and to decide the optimum condition of rice hull pretreatment for manufacture of rice hull board. Steam explosion method gave the best result, and the next boiling treatment of 1 hour, the last 1 hour treatment with 1% NaOH solution. Optimum conditions of explosion method were 20kgf/$cm^2-1$ minute and 25kgf/$cm^2-1$ minute. Rice hull board made with exploded rice hull met the KS standard(KS F 3104, 1997) and showed the same strength as a control, PB. And also the 1 hour boiling treatment was more effective than the 1 hour treatment with 1% NaOH solution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.490-490
• /
• 2011

Graphene, hexagonal network of carbon atoms forming a one-atom thick planar sheet, has been emerged as a fascinating material for future nanoelectronics. Huge attention has been captured by its extraordinary electronic properties, such as bipolar conductance, half integer quantum Hall effect at room temperature, ballistic transport over ${\sim}0.4{\mu}m$ length and extremely high carrier mobility at room temperature. Several approaches have been developed to produce graphene, such as micromechanical cleavage of highly ordered pyrolytic graphite using adhesive tape, chemical reduction of exfoliated graphite oxide, epitaxial growth of graphene on SiC and single crystalline metal substrate, and chemical vapor deposition (CVD) synthesis. In particular, direct synthesis of graphene using metal catalytic substrate in CVD process provides a new way to large-scale production of graphene film for realization of graphene-based electronics. In this method, metal catalytic substrates including Ni and Cu have been used for CVD synthesis of graphene. There are two proposed mechanism of graphene synthesis: carbon diffusion and precipitation for graphene synthesized on Ni, and surface adsorption for graphene synthesized on Cu, namely, self-limiting growth mechanism, which can be divided by difference of carbon solubility of the metals. Here we present that large area, uniform, and layer controllable graphene synthesized on Cu catalytic substrate is achieved by acetylene-assisted CVD. The number of graphene layer can be simply controlled by adjusting acetylene injection time, verified by Raman spectroscopy. Structural features and full details of mechanism for the growth of layer controllable graphene on Cu were systematically explored by transmission electron microscopy, atomic force microscopy, and secondary ion mass spectroscopy.

• Korean Journal of Materials Research
• /
• 제22권5호
• /
• pp.243-248
• /
• 2012

ZrN nanoparticles were prepared by an exothermic reduction of $ZrCl_4$ with $NaN_3$ in the presence of NaCl flux in a nitrogen atmosphere. Using a solid-state combustion approach, we have demonstrated that the zirconium nitride nanoparticles synthesis process can be completed in only several minutes compared with a few hours for previous synthesis approaches. The chemistry of the combustion process is not complex and is based on a metathesis reaction between $ZrCl_4$ and $NaN_3$. Because of the low melting and boiling points of the raw materials it was possible to synthesize the ZrN phase at low combustion temperatures. It was shown that the combustion temperature and the size of the particles can be readily controlled by tuning the concentration of the NaCl flux. The results show that an increase in the NaCl concentration (from 2 to 13 M) results in a temperature decrease from 1280 to $750^{\circ}C$. ZrN nanoparticles have a high surface area (50-70 $m^2/g$), narrow pore size distribution, and nano-particle size between 10 and 30 nm. The activation energy, which can be extracted from the experimental combustion temperature data, is: E = 20 kcal/mol. The method reported here is self-sustaining, rapid, and can be scaled up for a large scale production of a transition metal nitride nanoparticle system (TiN, TaN, HfN, etc.) with suitable halide salts and alkali metal azide.