• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.5
• /
• pp.1-8
• /
• 2009

Since scan based testing is very efficient and widely used for testing large sequential circuits. However, since test patterns are serially injected through long scan chains, scan based testing requires very long test application time. Also, compared to the normal operations, scan shifting operations drastically increase power consumption. In order to solve these problems, this paper presents a new scan architecture for both test application time and test power reduction. The proposed scan architecture partitions scan chains into several segments and bypasses some segments which do not include any specified bit. Since bypassed segments are excluded from the scan shifting operation, the test application time and test power can be significantly reduced.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.312-316
• /
• 2015

PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens ($25.0{\times}3.0{\times}0.5mm$) were prepared by SLS and fired with the ceramic ($8.0{\times}3.0{\times}0.5mm$) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (${\alpha}$=.05). RESULTS. The mean values of Duceram Kiss ($61.18{\pm}6.86MPa$), Vita VM13 ($60.30{\pm}7.14MPa$), Ceramco 3 ($58.87{\pm}5.33MPa$), Noritake EX-3 ($55.86{\pm}7.53MPa$), and Vintage MP ($55.15{\pm}7.53MPa$) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.2
• /
• pp.68-71
• /
• 2006

Active thermography has been used for several years in the field of remote non-destructive testing. It provides thermal images for remote detection and imaging of damages. Also, it is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. For energy deposition, it use external heat sources (e.g., halogen lamp or convective heating) or internal heat generation (e.g., microwaves, eddy current, or elastic wave). Among the external heat sources, the ultrasound is generally used for energy deposition because of defect selective heating up. The heat source generating a thermal wave is provided by the defect itself due to the attenuation of amplitude modulated ultrasound. A defect causes locally enhanced losses and consequently selective heating up. Therefore amplitude modulation of the injected ultrasonic wave turns a defect into a thermal wave transmitter whose signal is detected at the surface by thermal infrared camera. This way ultrasound thermography(UT) allows for selective defect detection which enhances the probability of defect detection in the presence of complicated intact structures. In this paper the applicability of UT for fast defect detection is described. Examples are presented showing the detection of defects in PCB material. Measurements are performed on various kinds of typical defects in PCB materials (both Cu metal and non-metal epoxy). The obtained thermal image reveals area of defect in row of thick epoxy material and PCB.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.399-404
• /
• 2021

From 1 January 2020, the limit for Sulphur in fuel oil used on board ships operating outside designated emission control areas will be reduced to 0.5 %. This regulation by international maritime organization (IMO) is able to significantly reduce the amount of Sulphur oxides (SOx) discharging from ships and should have environmental advantages and health for all over the world. To meet the regulation, in these days, wet scrubber system is being actively developed. However, this process leads to make washing wastewater. In this study, we evaluated ion exchange resin system in accordance with scrubber wastewater discharge regulation by IMO. Theoretical wastewater used as feed solution of lab scale water treatment systems. The results revealed that nitrate ion was removed selectively in spite of high TDS wash wastewater solution depending on ion exchange resin property. Moreover, it was possible to improve efficiency of the system by optimizing operating conditions.

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.965-970
• /
• 2009

PCR technology has been widely used to detect and quantify microbial pathogens in foodstuffs, because the technique is rapid, sensitive, and selective. In this study, detection of contaminating pathogenic bacteria on shells of chicken eggs was performed using both a commercial multiplex polymerase chain reaction (PCR) kit and a viable count method employing a selective medium. The PCR kit was capable of detecting Campylobacter jejuni, Escherichia coli O157:H7, Staphylococcus aureus, Bacillus cereus, Vibrio parahaemolyticus, Listeria monocytogenes, Yersinia enterocolitica, Salmonella species, and Shigella species. Using the PCR method, five bacterial species were detected from 30 samples (33.3%) of 90 batches of eggs commercially available in a market. PCR products from B. cereus, S. aureus, L. monocytogenes, Y. enterocolitica, and E. coli O157:H7 were detected, and the numbers and frequencies of positive samples were 17 (18.8%), 12 (13.3%), 15 (16.6%), 16 (17.7%),and 4 (4.4%), respectively. None of any Salmonella species, C. jejuni, V. parahaemolyticus, or Shigella species was detected in this study. The results of PCR testing were confirmed using a typical viable count method employing a selective medium. We suggest that the multiplex polymerase chain reaction (mPCR) assay is a rapid and reliable method for detection of pathogenic bacteria contaminating eggs.

• Smart Structures and Systems
• /
• v.4 no.4
• /
• pp.465-492
• /
• 2008

Proper pretest planning is a vital component of any successful vibration test on engineering structures. The most important issue in dynamic testing of many engineering structures is arriving at the number and optimal placement of sensors. The sensors must be placed on the structure in such a way that all the important dynamic behaviour of a structural system is captured during the course of the test with sufficient accuracy so that the information can be effectively utilised for structural parameter identification or health monitoring. Several optimal sensor placement (OSP) techniques are proposed in the literature and each of these methods have been evaluated with respect to a specific problem encountered in various engineering disciplines like aerospace, civil, mechanical engineering, etc. In the present work, we propose to perform a detailed characteristic evaluation of some selective popular OSP techniques with respect to their application to practical civil engineering problems. Numerical experiments carried out in the paper on various practical civil engineering structures indicate that effective independence (EFI) method is more consistent when compared to all other sensor placement techniques.

• Solar Energy
• /
• v.7 no.1
• /
• pp.75-86
• /
• 1987

In this research, we have analyzed the researches and productions of solar collectors in Korea and U.S.A. In the U.S., collectors are produced by hundreds of manufacturers. The amounts are 23 million sq.ft for the liquid system, 358 thousand sq.ft of the air system and 266 thousand sq.ft for the vacuum tube and focus collectors. In Korea, a very small quantity is produced by several manufacturers. So they have to be largely dependent upon the imports in Korea. In the U.S., research topics include the materials development, design and applications. In Korea, however materials research has been rare and there have been only a few papers on selective coating. Researches have been limited to the system design and collector testing.

• BMB Reports
• /
• v.55 no.5
• /
• pp.213-219
• /
• 2022

The blood-brain barrier (BBB) is an interface between cerebral blood and the brain parenchyma. As a gate keeper, BBB regulates passage of nutrients and exogeneous compounds. Owing to this highly selective barrier, many drugs targeting brain diseases are not likely to pass through the BBB. Thus, a large amount of time and cost have been paid for the development of BBB targeted therapeutics. However, many drugs validated in in vitro models and animal models have failed in clinical trials primarily due to the lack of an appropriate BBB model. Human BBB has a unique cellular architecture. Different physiologies between human and animal BBB hinder the prediction of drug responses. Therefore, a more physiologically relevant alternative BBB model needs to be developed. In this review, we summarize major features of human BBB and current BBB models and describe organ-on-chip models for BBB modeling and their applications in neurological complications.

• Culinary science and hospitality research
• /
• v.17 no.4
• /
• pp.204-218
• /
• 2011

This research suggests development of medicinal food in the future, establishes a marketing strategy for securing and maintaining customers of medicinal food restaurants and proposes efficient management directions for medicinal food in the food service industry. The higher the level of medicinal food that can satisfy consumer demand for health such as prevention of adult diseases, fat content, Organic food, etc, the more the purchasing motives of medicinal food including repurchase intention and recommendation are shown. The result of the hypothesis testing shows that the purchasing motives in the influencing factors such as prevention of adult diseases, fat content, organic food, food balance have significant influence on satisfaction in the mediating factors. Based on these analysis results, this study offers useful information about medicinal food and management of a restaurant specializing in medicinal food.

• Journal of Convergence for Information Technology
• /
• v.10 no.4
• /
• pp.46-54
• /
• 2020

This study aims to develop and analyze the performance of a selective option straddle strategy based on forecasted volatility to improve the weakness of typical straddle strategy solely based on negative volatility risk premium. The KOSPI 200 option volatility is forecasted by the SVM model combined with the asymmetric volatility spillover effect. The selective straddle strategy enters option position only when the volatility is forecasted downwardly or sideways. The SVM model is trained for 2008-2014 training period and applied for 2015-2018 testing period. The suggested model showed improved performance, that is, its profit becomes higher and risk becomes lower than the benchmark strategies, and consequently typical performance index, Sharpe Ratio, increases. The suggested model gives option traders guidelines as to when they enter option position.