• Korean Journal of Computational Design and Engineering
• /
• 제5권4호
• /
• pp.293-300
• /
• 2000

The non-manifold geometric modeling technique is to improve design process and to Integrate design, analysis, and manufacturing by handling mixture of wireframe model, surface model, and solid model in a single data structure. For the non-manifold geometric modeling, Euler operators and other high level modeling methods are necessary. Boolean operation is one of the representative modeling method for the non-manifold geometric modeling. This thesis studies Boolean operations of non-manifold model with the data structure of selective storage. The data structure of selective storage is improved non-manifold data structure in that existing non-manifold data structures using ordered topological representation method always store non-manifold information even if edges and vortices are in the manifold situation. To implement Boolean operations for non-manifold model, intersection algorithm for topological cells of three different dimensions, merging and selection algorithm for three dimensional model, and Open Inventor(tm), a 3D toolkit from SGI, are used.

• Transactions of the Society of Information Storage Systems
• /
• 제3권3호
• /
• pp.118-122
• /
• 2007

Phase-change wet-etching technology using GeSbTe phase-change films is developed. Selective etching between an amorphous and a crystalline phase can be carried out with an alkaline etchant of NaOH. Etching selectivity is dependent not only on the concentration of the alkaline etchant but also on the film structure. Specifically, metal films for heat control cause marked effects on the etching properties of GeSbTe film. Surviving amorphous pits can be obtained with Al metal layer, however etched amorphous pits are seen with Ag metal layer. An opposite selective etching behavior can be observed between samples with two different metal layers.

• Journal of Bio-Environment Control
• /
• 제26권4호
• /
• pp.353-360
• /
• 2017

In this study, the design and performance test of the air to water heat pump capable of producing hot water for greenhouse heating by using the surplus solar heat inside the greenhouse and the air heat outside greenhouse as the selective heat source were conducted. The heat storage operations using the surplus solar heat and the outside air heat were designed to be switched according to the setting temperature of the greenhouse in consideration of the optimum temperature range of the crop. In the developed system, it was possible to automatically control the switching of heat storage operation, heating and ventilation by setting 12 reference temperatures on the control panel. In the selective heat storage operation with the surplus solar heat and outside air heat, the temperature of thermal storage tank was controlled variably from $35^{\circ}C$ to $52^{\circ}C$ according to the heat storage rate and heating load. The heat storage operation times using the surplus solar heat and outside air heat were 23.1% and 30.7% of the experimental time respectively and the heat pump pause time was 46.2%. COP(coefficient of performance) of the heat pump of the heat storage operation using the surplus solar heat and outside air heat were 3.83 and 2.77 respectively and was 3.24 for whole selective heat storage operation. For the comparative experiment, the heat storage operation using the outside air heat only was performed under the condition that the temperature of the thermal storage tank was controlled constantly from 50 to $52^{\circ}C$, and COP was analyzed to be 2.33. As a result, it was confirmed that the COP of the heat storage operation using the surplus solar heat and outside air heat as selective heat source and the variable temperature control of the thermal storage tank was 39% higher than that of the general heat storage operation using the outside air heat only and the constant temperature control of the thermal storage tank.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제22권1호
• /
• pp.71-76
• /
• 2022

Buffer cache bridges the performance gap between memory and storage, but its effectiveness is limited due to periodic flush, performed to prevent data loss in smartphones. This paper shows that selective flushing technique with small persistent memory can reduce the flushing overhead of smartphone buffer cache significantly. This is due to our I/O analysis of smartphone applications in that a certain hot data account for most of file writes, while a large proportion of file data incurs single-writes. The proposed selective flushing policy performs flushing to persistent memory for frequently updated data, and storage flushing is performed only for single-write data. This eliminates storage write traffic and also improves the space efficiency of persistent memory. Simulations with popular smartphone application I/O traces show that the proposed policy reduces write traffic to storage by 24.8% on average and up to 37.8%.

• Journal of Korea Multimedia Society
• /
• 제20권8호
• /
• pp.1312-1320
• /
• 2017

Recently, vector map data is developed and used in many domains widely. In the most cases, vector map data contains confidential information which must be kept away from unauthorized users. Moreover, the production process of vector maps is considerably complex and consumes a lot of money and human resources. Therefore, the secured storage and transmission are necessary to prevent the illegal copying and distribution from hacker. This paper presents a selective encryption algorithm using geometric objects in frequency domain for vector map data. In the proposed algorithm, polyline and polygon data in vector map is the target of the selective encryption process. Experimental results verified that proposed algorithm is effectively and adaptive the requirements of security.

• Transactions of the Society of Information Storage Systems
• /
• 제11권1호
• /
• pp.1-5
• /
• 2015

The selective frequency analysis method is suggested in the holographic data storage system with the nyquist aperture to reduce the size of hologram. The image filter was designed with many different methods to improve the bit error rate caused by the nyquist aperture. In previous the methods of image restoration for HDS, an iteration time and a highly precise point spread function were necessary. In this paper, we describe the optical system with analytic method. Thereby, we expect our result help the researchers to design the filter.

• Korean journal of food and cookery science
• /
• 제23권4호통권100호
• /
• pp.413-422
• /
• 2007

In this study, changes in the volatile compounds of Artemisia capillaris essential oil were investigated under six different storage conditions for 6 months. The essential oil was collected by steam distillation and analyzed by a gas chromatography-mass selective detector (GC-MSD). Seventy-five volatile compounds were identified from the fresh essential oil of Artemisia capillaris. During storage, the total levels of aldehydes, alcohols, and ketones slightly decreased and the level of hydrocarbons greatly decreased; the total level of esters also decreased in the essential oil. Notably, the levels of carvacrol, eugenol, myrcene, 1,8-cineole, caryophyllene, coumarin, ${\alpha}-thujone$, ${\beta}-thujone$, borneol, and ${\gamma}-terpinene$, known as antioxidants and antimicrobial agents, decreased during storage. Finally, aerobic storage conditions caused greater reductions in some compounds even at low temperatures.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제41권2호
• /
• pp.341-351
• /
• 2017

This study evaluates a cleaning method to maintain and minimize the change of blood soil for the selective removal of stains from textiles with historical significance and special meaning. Cotton and silk fabrics were soiled with blood, aged artificially and then washed by wet cleaning or dry cleaning (water, nonionic surfactant; Triton, natural surfactant; saponin, organic solvent; n-Decane). The washed fabrics were stored at room temperature for four years. The change of the blood soil was evaluated by SEM, weight, thickness, and color differences. Subsequently, the shape and the amount of blood adsorption on the fabric varied depending on fiber type and fabric structure characteristics; in addition, long term storage affected changes to blood soil. It was difficult to remove artificially aged blood soil from fabrics by wet or dry cleaning. However, the changes of the blood soil by these cleanings can be explained by the changes on SEM, weight, thickness and fabric color. The changes (especially color) showed over time. Wet cleaning showed that the changes of those factors were slightly lower than those by dry cleaning.

• Korean Journal of Computational Design and Engineering
• /
• 제2권3호
• /
• pp.150-160
• /
• 1997

Existing non-manifold data structures which use the ordered topological representation method, are designed based on a "Model" which is the highest topological entity. Their non-manifold information is always included in edges and vertices even if they are in the manifold situation. Thus they require large storage spaces than manifold data structures. The proposed data structure reduces its storage space by removing unnecessary information stored in edges and vertices. Topological information is classified into manifold and non-manifold information. The main non-manifold information is radial cycles and disk cycles. The proposed data structure always stores manifold information. For the non-manifold situation, the edge stores radial cycles, and the vertex stores disk cycles. The storage space can be reduced in the later stage of CAD design when the ratio of non-manifold to manifold entities is small.

• Food Science and Preservation
• /
• 제23권6호
• /
• pp.759-764
• /
• 2016

This purpose of this study was to determine the best enrichment medium for rejuvenating and recovering Salmonella placed in cold temperature prior to the employment of the gold biosensor combined with a light microscopic imaging system. A mixture of nalidixic-resistant Salmonella Typhimurium and Enteritidis were inoculated onto chicken (1,000 CFU/chicken). After cold injury at $4^{\circ}C$ for 24 hr, Salmonella on chicken was enriched for 6 hr with six non-selective media including buffered peptone water broth, lactose broth, brain heart infusion broth (BHI), universal pre-enrichment broth, nutrient broth, and tryptic soy broth, and five selective media including brilliant green broth (BG), rappaport-vassiliadis R10 broth, selenite cystine broth, selenite broth, and tetrathionate brilliant green broth (TBG) for the comparison of Salmonella growth. Various concentrations of Salmonella (10, 50, 100, 500, and 1,000 CFU/chicken) were then enriched for 6 hr in both BHI and BG media to select the best media. BHI was selected as the most effective non-selective enrichment medium, while BG was selected as the most effective selective enrichment medium. Finally, BHI medium was selected as the most efficient enrichment medium for Salmonella growth injured from cold temperature during processing or storage.