• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.20-25
• /
• 2020

나노과학과 나노기술의 발전에 따라 선택적 패턴 성장을 위한 기술이 주목을 받고 있다. 실리카(Silica) 나노입자는 바이오 라벨링, 바이오 이미징 및 바이오 센싱에 사용되고 있는 유망한 나노소재이다. 본 연구에서는 실리카 나노입자를 수정된 스토버 방법(Stöber Method)인 졸겔(Sol-Gel) 공정으로 합성하였다. 또한 기판의 표면을 미세접촉프린팅 기술로 발수 처리하여 실리카 나노입자를 선택적으로 패턴 성장시켰다. 합성된 실리카 나노입자의 크기와 선택적으로 패턴 성장된 실리카 나노입자의 표면형상을 전계방출 주사전자현미경(Field Emission Scanning Electron Microscopy, FE-SEM)으로 조사하였고, 기판의 표면 기능화에 따른 기판의 접촉각 특성을 조사하였다. 그 결과 OTS 용액으로 발수 처리된 기판에서는 실리카 나노입자를 스핀 코팅하였을 때, 실리카 나노입자를 관찰할 수 없었으나, KOH 용액으로 친수 처리된 기판에서는 실리카 나노입자가 잘 코팅되는 것을 확인하였다. 또한 미세접촉프린팅 기술로 발수 처리한 기판영역 외에서만 실리카 나노입자가 선택적으로 패턴 성장하는 것을 FE-SEM으로 확인하였다. 이러한 실리카 나노입자의 패턴성장 특성을 염료가 도핑 된 실리카 나노입자에 적용한다면, 실리카 나노입자의 패턴 성장 기술은 바이오 이미징 및 바이오 센싱 분야에 유용하게 활용될 것으로 기대된다.

• 한국콘텐츠학회논문지
• /
• 제11권3호
• /
• pp.293-301
• /
• 2011

치과보철물의 소재는 생물 화학적, 물리적 안정성을 위하여 우수한 생체친화성이 요구된다. 그래서 본 연구에서는 새로운 기술인 레이저 선택용융 가공법으로 제작된 Co-Cr합금(SC시편), Ti합금(ST시편)을 일반적으로 사용되는 주조법으로 제작된 Co-Cr합금(CC시편), Ni-Cr합금(CN시편)과 비교분석하여 기계적 특성과 생물학적 안정성 평가를 실시하였다. 기계적 특성 평가를 위하여 인장시험을 통한 탄성계수를 측정하였다. 그리고 생물학적 안정성 평가를 위하여 유사체액(lactic acid-NaCl solution)을 이용한 용출물질 분석과 용출배지를 이용한 세포독성을 관찰하였다. 그 결과 레이저 선택용융 가공법으로 제작한 Co-Cr 합금이 주조법으로 제작한 Co-Cr합금보다 탄성계수가 높게 나타났다. 그리고 용출물질 분석과 세포독성 평가에서 레이저 선택용융 가공법으로 제작한 Co-Cr합금의 생물학적 안정성이 양호한 것으로 평가되었다. 결과에 의하여 레이저 선택용융 가공법으로 제작한 합금이 치과보철물 제작을 위한 합금으로 적용할 수 있는 것으로 판단된다.

• 한국항공우주학회지
• /
• 제42권6호
• /
• pp.445-452
• /
• 2014

본 논문은 제한된 계산 자원을 가진 환경에서 대규모 구조해석을 위해 고안된 보조기억장치를 활용하는 선형 직접해법에 대해 논의한다. 대용량 구조해석은 많은 기억공간과 계산량을 요구하기에 계산 자원이 부족할 경우 보조기억장치를 활용하는 해법을 개발할 필요가 있다. 본 연구는 한정된 주기억장치의 활용성을 극대화하고 상대적으로 느린 보조기억장치 저장량을 최소화하는 다중프론트 해법의 알고리즘을 소개한다. 구조해석 문제의 대칭성을 활용한 스택 공간 사용 기법과 역순 스택 자료 구조, 데이터 블록 크기에 따른 선택적 저장 기법과 데이터 복원 기법을 제시하였다. 본문에서 논의된 방법들을 적용한 다중프론트 해법이 여러 성능비교 문제에서 더 나은 계산 성능을 보임을 확인할 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.907-912
• /
• 2005

Micro-patterns of $Pb(Zr_{0.53}Ti_{0.47})O_3$, PZT, thin films with a MPB composition were deposited on $Pt/Ti/SiO_2/Si$ substrate from molecular-designed PZT precursor solution by using self-assembledmonolayer(SAM) as a template. This method includes deposition of SAM followed by the optical etching by exposing the SAM to the UV-light, leading to the patterned SAM as a selective deposition template. The pattern of SAM was formed by irradiating UV-light to the SAM on a substrate and/or patterned PZT thin film through a metal mask for the selective deposition of patterned PZT or lanthanum nickel oxide (LNO) precursor films from alkoxide-based precursor solutions. As a result, patterned ferroelectric PZT and PZT/LNO thin film capacitors with good electrical properties in micrometer size could be successfully deposited.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1332-1334
• /
• 2008

Stable crystalline 1-Benzyl-4-aza-1-azonia-bicyclo[2.2.2]octane tribromide (BABOT), can be readily synthesized from the reaction of the corresponding bromide with $HNO_3$ and aqueous KBr. Selective Oxidation of a variety of dialkyl and alkyl Aryl sulfides to the corresponding sulfoxides in high yield was achieved by this reagent in solution ($CH_3CN/H_2O$) and solvent free conditions. The reaction proceeds under neutral and mild conditions and can be carried out easily at room temperature with regeneration of BABOT. In this method purification of products is straightforward and no over oxidation to sulfone was noted.

• 열처리공학회지
• /
• 제26권4호
• /
• pp.173-177
• /
• 2013

Separation and recovery of valuable metals such as zinc, nickel or tin from copper alloy dross has recently attracted from the viewpoints of environmental protection and resource recycling. In this report, preliminary study on concentration and separation of tin from copper alloy dross using selective dissolution method was performed. The tin in the copper alloy dross did not dissolve in the nitric acid solution which could allow the concentration and separation of the tin from the copper alloy dross. Precipitation of tin as $H_2SnO_3$ (metastannic acid) occurred in the solution and transformed to tin dioxide ($SnO_2$) after drying process. The dried sample was heat-treated at low temperature and its phase characteristics, surface morphology and chemical composition were investigated.

• 한국표면공학회지
• /
• 제55권3호
• /
• pp.156-163
• /
• 2022

An ammonium ion with a size and charge similar to that of potassium can bind to valinomycin, which is used as an ion carrier for potassium, and cause a meaningful interference effect on the detection of potassium ions. Currently, there are few ion sensors that correct the interference effect of ammonium ions, and there are few studies that specifically suggest the mechanism of the interference effect. By fabricating a SPCE-based potassium ion-selective electrode, the electromotive force was measured in the concentration range of potassium in the nutrient solution, and the linear range was measured to be 10^-5 to 10^-2 M, and the detection limit was 10^-5.19 M. And the interference phenomenon of the potassium sensor was investigated in the concentration range of ammonium ions present in the nutrient solution. Therefore, a data-based analysis strategy using deep learning was presented as a method to minimize the interference effect.

• 한국세라믹학회지
• /
• 제35권4호
• /
• pp.319-324
• /
• 1998

Sol-gel derived phosphate water-sioluble glasses containing Cu were prepared. Powder-shape of glasses were added in D.I water used polyethylene bottle. After solution contained glass powder were submerged in water bath on 25$^{\circ}C$ their dissolution behavior/characteristics bactericidal effect and cytotoxicity test were evaluated. The maximum amount of Cu(35 mol%) via sol-gel method was more 5 mol% increased than that with melting process. The stage of total dissolution was more dominant than that of selective leaching dur-ing dissolution due to dissolved amount of glasses increased linearly with time. The ratio of Cu+ to {{{{ {Cu }^{2+ } }} was 3:7 so that the structure of glasses is more predominant 2-dimension chain structure than 3-dimenshion po-lymeric structue. The stage of total dissolution was more dominant than that of selective leaching during dissolution. Bactericidal effect against all bacteria showed that solutions which contained 40 ppm and 100 ppm of Cu killed 80 percentages of bacteria within 2 hours and 100 percentages of those within 12 hours. The results of cytotoxicity test for L929 cells showed no cytotoxicity were observed within 96 hours for dis-solved solution that contains 40 ppm and 100 ppm of Cu.

• 약학회지
• /
• 제40권6호
• /
• pp.625-631
• /
• 1996

The $H^+$-selective membrane consists of tridodecylamine, 2-nitrophenyl octyl ether and a little amount of additive in carboxylated PVC matrix, where penicillinase(Pcase ) and glutaraldehyde may be covalently attached to the matrix. When the $H^+$-selective electrode was used as a detector of biosensor, calibration curve calculated from Nernst equation was not linear. So we investigated the characteristic responses of the $H^+$-selective electrode to the product H+ from hydrolysis of penicillin-G(Pc-G) and plotted calibration curve correlating potential to concentration of Pc-G linearly. The optimal concentration of buffer solution was theoretically calculated and was also experimented. We tried to explain the linear curve of potential to concentration of Pc-G by using Henderson-Hasselbach equation. This method is more effective in calibration curve plotting than any other previous methods. The results obtained may help in further developing pH electrodes with improved analytical preformance.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.40-49
• /
• 1990

For the determination of polluant NOx in ambient air, nitrate ion-selective electrode(ISE) was made. To comparison of NOx in each method, the nitrate-ISE, NEBA, Orion electrode were used to determinee NOx in ambient air. In this work, the concentration of NOx in ambient air was average 0.06ppm. The results were good agreement with those obtained by each method within a relative error of 3％, Absorbing efficiency of nitrogen oxides in ambient air was good for Alkali solution. The determination of nitrogen oxides in ambient air using the Aliquat 336N-PVC membrane electrode was one of the useful method. The best characteristics of the Aliquat 336N-PVC me,mbrane electrode were obtained with the ion-exchanger concentration level of 6.5-9.1 percent by weight. The optimal membrane composition, was 9.09wt.％ of ion-exchanger, 30.95wt.％ of PVC, 60.6wt.％ of plasticizer (DBP), and 0.5mm of thickness. Under the above condition, the electrode approached the Nernstian slope most closely, and the linear response ranges produced the best results.