• Resources Recycling
• /
• v.26 no.3
• /
• pp.26-31
• /
• 2017

LIX 63 showed a selectivity for the extraction of Pd(II) over other PGMs, such as Pt(IV), Ir(IV) and Rh(III) from 6 M HCl solution. Moreover, HCl solution has significant effect on the oxidation-reduction reaction between Ir(IV) and LIX 63. Therefore, the applicability of employing LIX 63 for the separation of the 4 PGMs was investigated from 3 M HCl solution. From 3 M HCl solution, only Pd(II) was selectively extracted by LIX 63 and its extraction percentage was higher than from 6 M HCl solution. Extraction of the Pd(II) free raffinate with TBP led to the selective extraction of Pt(IV). After oxidation of Ir(III) with $NaClO_3$ to Ir(IV), extraction of the Pt(IV) free raffinate with Aliquat 336 selectively extracted Ir(IV). For each extraction step, optimum stripping conditions were obtained. By this process, it was possible to separate the 4 PGMs by solvent extraction from 3 M HCl solution.

• Journal of Food Hygiene and Safety
• /
• v.16 no.1
• /
• pp.61-65
• /
• 2001

To investigate the optimum condition of 3-monochloro-1, 2-propanediol(MCPD) analysis, gas chromatography with electron capture detector was used. Determination of MCPD derivatized with phenylboric acid was more effective than that of underivatized MCPD. In derivatization of MCPD with phenyl boric acid, there were no significantly different between boiling for 2min at 9$0^{\circ}C$ and vortexing for 5min at room temperature. Extrelut column was suitable for extraction of MCPD diluted in 20% NaCl solution and recovery rates were higher than direct extraction of MCPD with ethyl acetate. But, the method of direct extraction of MCPD with ethyl acetate was useful for rapid ants qualitative analysis. The sample extracted in soysauce(ganjang) was derivatized with phenylboric acid and analyzed by gas chromatography-mass selective detector. That was confirmed as MCPD-phenylboronate.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.455-460
• /
• 1994

A selective extraction-spectrophotometric method for the determination of mercury(II) with nocotinaldehyde-4-phenyl-3-thiosemicarbazone(NPS) was described. The method is based on the formation of an insoluble mercury-NPS complex, which is extratable into chloroform from an aqueous solution at pH 3.5 by shaking for 3 min. The absorbance is measured at 365nm and the molar absorptivity is $2.45{\times}10^4L\;mol^{-1}\;cm^{-1}$. The complex system conforms to Beer's law for up to $18{\mu}g\;mL^{-1}$ of mercury(II). The proposed method is simple and selective and has been satisfactorily applied to the determination of mercury in standard human hair sample.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.545-548
• /
• 2004

A sensitive, selective and rapid method for the determination of nickel based on the rapid reaction of nickel(II) with QADMAA and the solid phase extraction of the Ni(II)-QADMAA chelate with $C_{18}$ membrane disks has been developed. In the presence of pH 6.0 buffer solution and sodium dodecyl sulfonate (SDS) medium, QADMAA reacts with nickel to form a violet complex of a molar ratio of 1 : 2 (nickel to QADMAA). This chelate was enriched by solid phase extraction with $C_{18}$ membrane disks. An enrichment factor of 50 was obtained by elution of the chelates form the disks with the minimal amount of isopentyl alcohol. The molar absorptivity of the chelate was $1.32{\times}10^5L\;mol^{-1}cm^{- 1}$ at 590 nm in the measured solution. Beer's law was obeyed in the range of 0.01-0.6 ${\mu}$g/mL. This method was applied to the determination of nickel in water and biological samples with good results.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.549-552
• /
• 2004

A sensitive, selective and rapid method has been developed for the determination of mercury based on the rapid reaction of mercury(II) with p-sulfobenzylidenethiorhodanine (SBDTR) and the solid phase extraction of the colored chelate with $C_{18}$ disks. In the presence of pH 3.5 sodium acetate-acetic acid buffer solution and Emulsifier-OP medium, SBDTR reacts with mercury(II) to form a red chelate of a molar ratio 1 : 2 (mercury to SBDTR). This chelate was prconcentrated by solid phase extraction with $C_{18}$ disks. An enrichment factor of 50 was achieved. The molar absorptivity of the chelate is $1.28{\times}10^5 L{\cdot}mol^{-1}{\cdot}cm^{-1}$ at 545 nm in measured solution. Beer's law is obeyed in the range of 0.01-3 ${\mu}$g/mL. The relative standard deviation for eleven replicates sample of 0.01 ${\mu}$g/mL is 1.65%. This method was applied to the determination of mercury in tobacco and tobacco additive with good results.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3241-3247
• /
• 2012

Ionic liquids (ILs) have been extensively investigated as promising alternatives to conventional organic solvents such as sulfolane and N,N-dimethylformamide for the selective extraction of aromatic hydrocarbons from the $C_6-C_{10}$ hydrocarbon mixtures produced from the cracking processes of naphtha and light oils. The most important advantage of ILs over conventional organic solvents is that they are immiscible with aliphatic hydrocarbons, and thus the back extraction of ILs from the raffinate phases and top hydrocarbon-rich layers is not necessary. In this paper, a brief review on the state of the art in the utilization of ILs for aromatics separation is presented.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.263-266
• /
• 2004

A sensitive, selective and rapid method has been developed for the determination ${\mu}$g/L level of vanadium ion based on the rapid reaction of vanadium(V) with 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP) and the solid phase extraction of the colored chelate with $C_{18}$ cartridge. The QADEAP reacts with V(V) in the presence of citric acid-sodium hydroxide buffer solution (pH = 3.5) and cetyl trimethylammonium bromide (CTMAB) medium to form a violet chelate of a molar ratio 1 : 2 (V(V) to QADEAP). This chelate was enriched by solid phase extraction with $C_{18}$cartridge and the enrichment factor of 50 was obtained by elution of the chelates from the cartridge with ethanol. The molar absorptivity of the chelate is $1.28 {\times}10^5L\;mol^{-1}cm^{-1}$ at 590 nm in the measured solution. Beer's law is obeyed in the range of 0.01-0.6 ${\mu}$g/mL. The detection limit is 0.04 ${\mu}$g/L in the original samples. This method was applied to the determination of vanadium(V) in water and biological samples with good results.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.262-267
• /
• 1983

A study has been carried out for a scheme of the selective extraction and determination of cesium, sodium and nuclides by the ion association with dicyclohexyl-24-crown-8 and sodium tetraphenylborate from primary coolant of a pressurized water reactor. For that purpose, the effects of hydrogen, cesium and borate ions on the extraction have been investigated. Interferences of iodine and xenon nuclides were found but could be removed by reducing with sodium thiosulfate and back extraction with 1 N hydrochloric acid solution, respectively.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.380-387
• /
• 2018

Finding poly(amidoxime) (PAO) based adsorbent with better performance in U(VI) extraction from seawater is a hot research topic. By employing plasma treatment, the bi-functionalized adsorbents containing amidoxime and phosphate (labelled as $PO_4/PAO$) were successfully synthesized. The obtained $PO_4/PAO$ was characterized and applied for the potential extraction of U(VI) from aqueous solution. The results show that $-PO_4$ enhanced the hydrophilicity of PAO. $PO_4/PAO$ possesses good selective sorption ability for U(VI) and excellent reusability. The findings is helpful to understand optimizing performance of PAO based adsorbents for uranium extraction from seawater.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.461-468
• /
• 2018

A highly sensitive, selective and rapid method for the determination of lead based on the reaction of lead (II) with 5-(4'-chlorophenylazo)-6-hydroxypyrimidine-2,4-dione (CPAHPD) and the solid phase extraction of the Pb(II)-CPAHPD complex with Amberlite XAD-2000 was developed, in the presence of pH 5.6 buffer solution and Triton X-114 medium. CPAHPD reacts with lead to form a violet complex with a molar ratio of 2:1 (CPAHPD to lead). This complex was enriched by the solid phase extraction with Amberlite XAD-2000. An enrichment factor of 500 was obtained by elution of the complex from the resin with a minimal amount of isopentyl alcohol(0.2 mL). In isopentyl alcohol medium,the molar absorptivity of the complex is $1.13{\times}10^6L\;mol^{-1}cm^{-1}$ at 647 nm. Beer's law is obeyed in the range of $5.0-160ng\;mL^{-1}$ in the measured solution. The relative standard deviation for 10 replicate samples of $50ng\;mL^{-1}$ level is 1.26%. The detection and quantification limits reaches 1.5 and $4.7ng\;mL^{-1}$ in the original samples. The presented procedure was successfully applied for determination of lead content in real samples such as vegetables, waters, biological and soil samples with satisfactory results.