• 문화기술의 융합
• /
• 제8권2호
• /
• pp.53-58
• /
• 2022

일반적인 가정용 선풍기는 단 하나의 좌우 회전 구간을 갖기 때문에 회전 각도를 조절할 수 없어 불필요한 영역까지 바람이 가거나 바람이 필요한 공간에 바람이 가지 않는 구간이 발생한다. 본 논문에서는 에너지 낭비를 줄이면서 필요한 공간에 선택적으로 바람을 보낼 수 있도록 회전 구간을 효율적으로 조절하는 방법을 제시하고자 한다. 정지 풍향각 측정 실험을 통해 최소 회전 각도를 구하였으며 최적의 회전 단계수를 선정하기 위해 바람이 도달하는 공간을 적절히 분할하였다. 이를 통해 선풍기가 45°의 최소 회전 각도와 3단계의 회전 구간을 가지면서 각 단계마다 정지 풍향각의 2배씩 회전 각도가 증가할 때 바람이 효율적으로 분배되는 것을 확인하였다. 따라서 본 논문에서 제시한 선택적 회전 구간 조절 방법은 선풍기 구조에 큰 변형 없이 에너지 낭비를 최소화 할 수 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2821-2823
• /
• 1999

In this paper we proposed an algorithm for rotation-invariant pattern recognition and rotated angle estimation between two patterns by employing selective template matching. Generally template matching has been used in determining the location of pattern but template matching requires a number of calculating correlation. To reduce the number of correlation we used steady-state genetic algorithm which is effective in optimization problem. We apply this method to distinguish specific pattern from similar coin patterns and estimate rotated angle between patterns. Our result leads us to the conclusion that proposed method performed faster than classical template matching

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.682-685
• /
• 2014

In this paper, we presented the window applicable blind-type frequency selective surface to control the coverage area of wireless communication in secure building or conference room. The proposed frequency selective structure has the reconfigurable frequency range depends on its blind rotation angle. To verify the proposed structure, we fabricated the window blind-type frequency selective surface with four-legged loaded element and ring-type element as a unit cell and performed measurements of the transmission characteristics for different blind rotation angles to prove the feasibility. The measurement results show good agreements with the simulation results. One of the advantages is that the proposed structure does not need to have a bias circuit, so it is very easy to implement at low cost and also can be applied to any planar surface for wireless security applications.

• 한국전문물리치료학회지
• /
• 제22권4호
• /
• pp.17-26
• /
• 2015

The purpose of this study was to investigate the effects of visual electromyography (EMG) biofeedback on the EMG activity of the lower trapezius (LT), serratus anterior (SA), and upper trapezius (UT) muscles, the LT/UT and SA/UT EMG activity ratios, and the scapular upward rotation angle during scapular posterior tilting exercise (SPTE). Twenty-four subjects with round-shoulder posture participated in this study. The EMG activities of the LT, SA, and UT were collected during SPTE both without and with visual EMG biofeedback. The scapular upward rotation angle was measured at the baseline, after SPTE without visual EMG biofeedback, and after SPTE with visual EMG biofeedback. The LT, SA, and UT EMG activities, and the LT/UT and SA/UT EMG activity ratios were analyzed by paired t-test. The scapular upward rotation angle was statistically analyzed using one-way repeated analysis of variance. If a significant difference was found, a Bonferroni correction was performed (p=.05/3=.017). The EMG activities of LT and SA significantly increased, and the EMG activity of UT significantly decreased during SPTE with visual EMG biofeedback compared to SPTE without visual EMG biofeedback (p<.05). In addition, the LT/UT and SA/UT EMG activity ratios significantly increased during SPTE with visual EMG biofeedback compared to SPTE without visual EMG biofeedback (p<.05). Significant increases were found in the scapular upward rotation angle after SPTE without and with visual EMG biofeedback compared to baseline (p<.017), and no significant differences were observed in the scapular upward rotation angle between SPTE without and with visual EMG biofeedback. In conclusion, SPTE using visual EMG biofeedback may be an effective method for increasing LT and SA activities while reducing UT activity.

• 대한물리의학회지
• /
• 제9권3호
• /
• pp.249-253
• /
• 2014

PURPOSE: This study intends to examine the effects of change of anatomical position of the ankle joint in open kinematic chain, an appropriate position for selective muscle training, on vastus lateralis obliques, rectus femoris, vastus medilais obliques, and rectus abdominalis muscle activation and to present an effective method of muscle training for patients and normal people. METHODS: The participants of this study were Korean healthy adult in their 20s. The 8 channel surface electromyography was used to measure muscle activation while the subjects raised their legs under each condition. Under each condition, while the subjects raised the leg to hip joint flexion at $60^{\circ}$ along the arch. RESULTS: The analysis result of muscle activation by each section and position during leg rising. There were significant differences. CONCLUSION: For independent strengthening of each muscle, muscle activation was measured according to leg raising angles and the result differed according to each section and position. If this study result is applied to muscle training for patients who need selective muscle training, more effective muscle strengthening will be made possible.

• The Journal of Korean Physical Therapy
• /
• 제28권2호
• /
• pp.106-111
• /
• 2016

Purpose: The aim of this study is to determine the effect of glenohumeral (GH) rotation position in modified knee push-up plus exercise (MKPUP) by examining the surface electromyography (EMG) amplitude in serratus anterior (SA), pectoralis major (PM), and upper trapezius (UTz) and the activity ratio of each muscle. Methods: A total of 22 healthy subjects volunteered for the study. Each subject performed the MKPUP at $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ of GH joint internal rotation. EMG of the SA and PM, UTz was compared between GH rotation positions and each muscle activity ratio. EMG was used to measure the muscle activity in terms of ratios to maximal voluntary isometric contraction (MVIC). Results: The difference in EMG activity during the exercise in three GH joint internal rotation positions was observed with the SA and the PM. The greater the GH joint internal rotation angle was, the lower the activity of the PM. In contrast, the SA showed higher activity. However, the activity of UT was similar under all conditions. The ratio of the SA and the PM was considerably greater at $90^{\circ}$ GH joint internal rotation than at $0^{\circ}$ and $45^{\circ}$. Conclusion: When excessive activation of the PM or imbalanced activation between the PM and the SA occurs, the MKPUP exercise is most effective at $90^{\circ}$ of GH joint internal rotation. Use of this position would be a beneficial strategy for selective strengthening of the SA and minimizing PM activation.

• 폴리머
• /
• 제35권4호
• /
• pp.350-355
• /
• 2011

고분자의 주사슬에 광반응을 할 수 있는 phenyldiacryloyl 그룹을 가지고, 곁사슬에 액정분자와 비슷한 메조겐인 biphenyl을 에테르 결합을 통해서 도입된 가용성 광반응성 폴리아미드를 합성하였다. 합성된 폴리아미드 고분자는 0.65 dL/g의 대수점도를 가지며, 일반적인 코팅 방법으로 여러 기질의 표면에 잘 도포되는 성질을 보였다. 광반응성 폴리아미드 고분자의 화학 구조는 $^1H$ NMR과 Fourier transform infrared(FTIR) spectroscopy를 이용해서 확인하였다. 합성된 고분자의 유리전이온도는 $150^{\circ}C$까지 관측되지 않았으며, 열분해 온도는 $280^{\circ}C$로 관측되어, 열안정성이 높음을 확인하였다. 합성된 폴리아미드 고분자 박막을 비편광된 자외선을 노광시켜 노광하는 에너지에 따른 변화를 조사했을 때, 좋은 광반응성을 보였다. 광반응성 폴리아미드를 이용하여 선편광된 자외선을 노광하여 제작한 액정 셀 내에서, 액정분자들은 노광된 선편광 자외선의 electric vector 방향의 수직으로 배향되는 것이 관측되었으며, 이러한 현상은 선편광 자외선의 노광량에는 무관함을 보였다. 액정 셀 내에서 액정분자들의 pretilt angle은 선편광된 자외선의 노광량에 따라 약간의 차이를 보이며 $0.2^{\circ}$에서 $0.5^{\circ}$사이의 값을 보였다.