• ETRI Journal
• /
• 제38권1호
• /
• pp.62-69
• /
• 2016

In this paper, we propose two novel user selection algorithms for multiuser multiple-input and multiple-output downlink wireless systems, in which both a base station (BS) and mobile stations (MSs) are equipped with multiple antennas. Linear transmit beamforming at the BS and receive combining at the MSs are used to avoid interference between users and find a better sum-rate capacity performance. An optimal technique for selecting users would entail an exhaustive search, which in practice becomes computationally complex for a realistic number of users. Suboptimal algorithms with low complexity are proposed for a coordinated beamforming scheme. Simulation results show that the performance of the proposed algorithms is better than that provided by previous algorithms and is very close to an optimal approach with reduced complexity.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1261-1270
• /
• 2020

The physical security layer of industrial wireless sensor networks in the event of an eavesdropping attack has been investigated in this paper. An optimal sensor selection scheme based on the maximum channel capacity is proposed for transmission environments that experience Nakagami fading. Comparing the intercept probabilities of the traditional round robin (TRR) and optimal sensor selection schemes, the system secure performance is analyzed. Simulation results show that the change in the number of sensors and the eavesdropping ratio affect the convergence rate of the intercept probability. Additionally, the proposed optimal selection scheme has a faster convergence rate compared to the TRR scheduling scheme for the same eavesdropping ratio and number of sensors. This observation is also valid when the Nakagami channel is simplified to a Rayleigh channel.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.178-184
• /
• 2012

BOD decay rate is a key parameter of BOD-DO models in streams and lakes. In the calibration of water quality modeling appropriate range of coefficient is required for guidance of parameter selection. In this study BOD decay rate was measured at 48 stream sites and 10 reservoir sites in 8 different river systems. The decay rate ranged from 0.09 to 0.25 $day^{-1}$ with a mean of 0.16 $day^{-1}$. Among river systems the decay rates showed significantly different ranges, with the Han River system showing higher values than other river systems. In comparing different types of water bodies, the decay rate was slightly higher in tributaries than in reservoirs and mainstreams. Our results can provide guidance to the selection of proper coefficient for various water bodies in the calibration of water quality models.

• 한국음향학회지
• /
• 제31권7호
• /
• pp.472-479
• /
• 2012

본 논문은 음성과 오디오의 혼합 콘텐츠를 대상으로 하는 9.2 kbps 저 전송률 변환여기 부호화기 설계를 목표로 한다. 저 전송률 환경을 위하여 주파수 영역 신호의 중요도에 따른 Band-Selection 방법과 Gain-Shape 양자화를 이용한 Analysis by Synthesis(AbS) 구조를 이용한다. AbS 구조를 이용하는 과정에서 발생하게 되는 연산량을 감소시키기 위하여 밴드별 IDFT를 취하고 합성하는 방법을 이용한다. 전송 되지 않는 구간에 대하여 Comfort Noise를 삽입함으로써 음질 저하 없이 설계한다. 기존의 TCX모드와 비교하여 저 전송률에서 성능의 저하 없는 부호화기를 제안한다.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1257-1265
• /
• 2015

본 논문은 투영 행렬을 이용한 높은 채널 용량을 획득할 수 있는 사용자 선택 기법을 제안한다. 기존의 Frobenius norm기반의 사용자 선택 기법이 다수의 사용자를 선택할수록 정확도가 감소하는 점을 투영 행렬의 근사화 형태를 이용하여 개선하였다. Flop count를 이용한 제안 기준의 계산복잡도를 분석하였고, 모의 실험을 통하여 안테나 구성에 따른 획득 가능한 채널 용량에 대해서 비교하였다. 모의 실험 결과를 통해 제안한 사용자 선택 기법이 더 높은 채널 용량을 획득하는 것을 확인하였다.

• BMB Reports
• /
• 제51권1호
• /
• pp.1-2
• /
• 2018

Positive selection on a new beneficial mutation generates a characteristic pattern of DNA sequence polymorphism when it reaches an intermediate allele frequency. On genome sequences of African Drosophila melanogaster, we detected such signatures of selection at 37 candidate loci and identified "sweeping haplotypes (SHs)" that are increasing or have increased rapidly in frequency due to hitchhiking. Based on geographic distribution of SH frequencies, we could infer whether selective sweeps occurred starting from de novo beneficial mutants under simple constant selective pressure. Single SHs were identified at more than half of loci. However, at many other loci, we observed multiple independent SHs, implying soft selective sweeps due to a high beneficial mutation rate or parallel evolution across space. Interestingly, SH frequencies were intermediate across multiple populations at about a quarter of the loci despite relatively low migration rates inferred between African populations. This invokes a certain form of frequency-dependent selection such as heterozygote advantage. At one locus, we observed a complex pattern of multiple independent that was compatible with recurrent frequency-dependent positive selection on new variants. In conclusion, genomic patterns of positive selection are very diverse, with equal contributions of hard and soft sweeps and a surprisingly large proportion of frequency-dependent selection in D. melanogaster populations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.1961-1974
• /
• 2019

In this letter, a harmonic-mean-based dual-antenna selection scheme at relay node is proposed in two-way relaying networks (TWRNs). With well-designed distributed orthogonal concatenated Alamouti space-time block code (STBC), a dual-antenna selection problem based on the instantaneous achievable sum-rate criterion is formulated. We propose a low-complexity selection algorithm based on the harmonic-mean criterion with linearly complexity $O(N_R)$ rather than the directly exhaustive search with complexity $O(N^2_R)$. From the analysis of network outage performance, we show that the asymptotic diversity gain function of the proposed scheme achieves as $1/{\rho}{^{N_R-1}}$, which demonstrates one degree loss of diversity order compared with the full diversity. This slight performance gap is mainly caused by sacrificing some dual-antenna selection freedom to reduce the algorithm complexity. In addition, our proposed scheme can obtain an extra coding gain because of the combination of the well-designed orthogonal concatenated Alamouti STBC and the corresponding dual-antenna selection algorithm. Compared with the common-used selection algorithms in the state of the art, the proposed scheme can achieve the best performance, which is validated by numerical simulations.

• ETRI Journal
• /
• 제42권1호
• /
• pp.17-25
• /
• 2020

Multiple-input multiple-output systems can achieve a full sum rate (SR) via full duplex (FD). However, its performance is degraded by self-interference (SI) that occurs between the transmitter and receiver at the same node and thus is constrained by error floors. Conversely, half duplex (HD) can avoid the SI albeit at lower spectral efficiency, and the slope of its error curve is determined by the diversity order. In this study, a link selection scheme based on switching between FD and HD is examined as a simple method to improve the bit error rate (BER) performance of FD systems. In the proposed link selection algorithm, either FD or HD is selected based on the received minimum distance and signal-to-interference plus noise ratio. Simulation results indicate that the proposed hybrid FD/HD switching system offers significant BER performance improvement when compared with that of the conventional FD and FD based on only the received minimum distance under the same fixed SR. Under relatively sufficient SI cancellation, it is demonstrated to outperform the HD with a diversity advantage in low and medium signal-to-noise ratio region.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.347-358
• /
• 2012

Purpose: Given the mixture components - process variables experimental data, we propose the strategy to find the proper combined model. Methods: Process variables are factors in an experiment that are not mixture components but could affect the blending properties of the mixture ingredients. For example, the effectiveness of an etching solution which is measured as an etch rate is not only a function of the proportions of the three acids that are combined to form the mixture, but also depends on the temperature of the solution and the agitation rate. Efficient designs for the mixture components - process variables experiments depend on the mixture components - process variables model which is called a combined model. We often use the product model between the canonical polynomial model for the mixture and process variables model as a combined model. Results: First we choose the reasonable starting models among the class of admissible product models and practical combined models suggested by Lim(2011) based on the model selection criteria and then, search for candidate models which are subset models of the starting model by the sequential variables selection method or all possible regressions procedure. Conclusion: Good candidate models are screened by the evaluation of model selection criteria and checking the residual plots for the validity of the model assumption. The strategy to find the proper combined model is illustrated with examples in this paper.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.99-104
• /
• 2014

Nowadays, various researches fulfill in many communication engineering area for B4G (Beyond Forth Generation). Next LTE-A (Long Term Evolution Advanced), MU-MIMO (Multi-User Multi Input Multi Output) method raises to upgrade throughput performance. However, the method of user selection is not decided because of many types and discussions in MU-MIMO system. Many existing methods are powerful for enhancing performance but have various restrictions in practical implementation. Fairness problem is primary restriction in this area. Existing papers emphasis algorithm to increase sum-rate but we introduce an algorithm about dealing with fairness problem for real commercialization implementation. Therefore, this paper introduces new user selection method in MU-MIMO system. This method overcomes a fairness problem in SUS (Semiorthogonal User Selection) algorithm. We can use the method to get a similar sum-rate with SUS and a high fairness performance. And this paper uses a hybrid method with SC-SUS (Superposition Coding SUS) algorithm and SUS algorithm. We find a threshold value of optimal performance by experimental method. We show this performance by computer simulation with MATLAB and analysis that results. And we compare the results with another paper's that different way to solve fairness problem.