• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.689-693
• /
• 1996

This paper was performed on the automatic selection of cutting condition on multispindle machine. the several mathematical relationships were formulated for simulataneous selection of machining parameters and tool changing scheme. In this research we used two step generative approach; step 1 is mathematical modeling for the selection of optimal cutting conditions and the other is GMDH-TYPE modeling to find prediction equation of system performance. thus in this paper, mathematical machining models combined with a heuristic GMDH-TYPE modeling to estimate the system performance, these models are developed computer programs for practical application and it was shown that the proposed approach has a good potential and offers a valuable tools to performance evaluation for metal cutting system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.253-254
• /
• 2013

• Proceedings of the KWS Conference
• /
• 1994.05a
• /
• pp.186-189
• /
• 1994

This paper proposes an expert system for the selection of the appropriate laser cutting variables from the available database. Optimum cutting conditions were searched and qualitative comments which are hard to choose as database variables were shown using the binary and fuzzy inference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.6
• /
• pp.465-470
• /
• 2013

In this paper, we introduce a modulation code design problem where best selection of two-dimensional codewords are determined to reduce two-dimensional (2D) Intersymbol Interference (ISI) and Interpage Interference (IPI), while when these codewords are randomly arranged on the storage, isolated pixel cannot be formed. Codeword selection problem and isolated pixel detection problem are formulated as integer program models and we develop a cutting plane algorithm where a valid cut is generated to remove current feasible solution to avoid isolated pixel by solving the isolated pixel detection subproblem. Using the proposed method, $4{\times}2$ 6/8 codewords with non-isolated pixel are found.

• Tribology and Lubricants
• /
• v.4 no.2
• /
• pp.52-59
• /
• 1988

The purpose of this study is to establish a standard for proper selection of water soluble cutting fluids, such as Emulsion type, Semi-Synthetic type and synthetic type, by investigating cutting effects at the normal temperature(26$\circ$C) and cooling temperature(0$\circ$C) from the viewpoint of cooling and lubricant actions. This paper describes a relation among cutting force, surface roughness and cooled water soluble cutting fluids which are considered as effective restraints on Built up edge.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.146-155
• /
• 1992

The natural mixed stand in Jindong-Ri, according to a recent study, showed the possibility of selection cutting as a silvicultural system based on the stand structure such as DBH distribution and height distribution. However, volume structure per DBH class of this stand had not a mature stand of selection cutting. In this study, wherefore, the rate of increment for DBH and volume was used to predict the future stand structure including volume distribution per DBH class. The possibility of selection cutting was then discussed using the future stand structure. From the prediction of future stand structure for 30 years per every 10 years, it could be concluded that the stand will be induced to selection cutting forest because of enough number of trees in objective DBH class and above, total volume per hectare, and the volume of large DBH class which can be harvested every year. However, this stand still did not show the structure of typical selection cutting which has the rate of 1 : 2 : 7 in the number of trees per hectare and the volume rate of 5 : 3 : 2 for large, medium, and small DBH class. This problem could be improved by appropriate silvicultural treatments.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.76-83
• /
• 2006

Machining accuracy is closely related with tool deflection induced by cutting forces. In this research, cutting forces and tool deflection in end milling are expressed as a closed form of tool rotational angle and cutting conditions. The discrete cutting fores caused by periodic tool entry and exit are represented as a continuous function using the Fourier series expansion. Tool deflection is predicted by direct integration of the distributed loads on cutting edges. Cutting conditions, tool geometry, run-outs and the stiffness of tool clamping part are considered together far cutting forces and tool deflection estimation. Compared with numerical methods, the presented method has advantages in prediction time reduction and the effects of feeding and run-outs on cutting forces and tool deflection can be analyzed quantitatively. This research can be effectively used in real time machining error estimation and cutting condition selection for error minimization since the form accuracy is easily predicted from tool deflection curve.

• Journal of Welding and Joining
• /
• v.12 no.3
• /
• pp.71-81
• /
• 1994

Laser cutting is experiencing a rising worldwide acceptance in the industry. Expert systems are necessary for the systematic arrangement and searching of experimental data existing in journal papers, job handbooks, etc.. This paper proposes an expert system for the selection of the appropriate laser cutting variables from the available database. Optimum cutting conditions according to the given cutting velocity were searched and qualitative comments which are difficult to be used as database variables were shown at each velocity using the binary and fuzzy inference. These comments could be informative to unskilled operators of the laser cutting process. Typical cutting conditions of the mild steel and stainless steel were included and the working range and quality variations were displayed graphically. The proposed algorithm was implemented in an IBM compatible personal computer as an expert system for CO$_{2}$ laser cutting to derive the optimum cutting conditions by using the turbo prolog.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.1-5
• /
• 2001

This study presents an electronic catalogue based cutting parameter selection system using MS Access software. The proposed system has been designed to electronically select proper cutting conditions based on the stored data base. The existing approaches used in most small and medium sized companies are basically to use manufacturing engineer's experience or to find the recommended values from the manufacturing engineer handbook. These processes are often time consuming and inconsistent, especially when a new engineer is involved. Therefore, this study proposes a simple, yet quick and consistent electronic catalogue based cutting parameter selection method which uses MS Access in terms of programming and database implementation. Consequently, the proposed system could automatically generate the proper cutting conditions (feed, depth of cut, and cutting speed) as soon as the input data (proper information about the tool and work material) is given. Thanks to the simple structure and popularity of the MS Access, the engineer could be quickly accustomed to the system and easily modify/insert/delete the database if necessary.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.104-116
• /
• 1998

This paper provides a review of the performance for SM45C using the CNC lathe. Under the constant cutting area, the tool wear for large feed rate is more than the small feed rate, and the progress goes more rapidly as the cutting speed is increased. This is caused by the friction between the workpiece and the bite. The average cutting force increases as the feedrate increases, and decreases as the cutting speed increases. This is because the effective rake/shear angle becomes smaller as the feedrate becomes larger. The higher is the cutting speed and the aspect ratio (the ratio for depth of cut to feedrate), the lower is the cutting force and the surface roughness. Also, for the optimal selection of the cutting conditions, many experimental graphical data were obtained. That is, the cutting force, the tool life, and the surface roughness were measured and investigated as the depth of cut and the feedrate changed. And the size effect was examined as the depth of the cut varied.