• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.88-92
• /
• 2017

As the considerable request of the fast and accurate way of the selection of circuit breaker is increased, we introduce the development of software of circuit breaker selection for the marine use. Originally, the selection of circuit breaker has been carried out by manual in the marine project. It is not the easy work to select the proper type of circuit breaker to check the time-current characteristic curves of each type of circuit breakers for the various type of loads. In this regards, we developed the software to select the proper type of circuit breaker to confirm fast and accurately. And, we introduce the course of the development of the software for the selection of circuit breaker.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.55-61
• /
• 1994

The multiple valued logic(MVL) circuit with ROM type using current mode CMOS is presented in this paper. This circuit is composed of the multiple valued-to-binary(MV/B) decoder and the selection circuit. The MV/B decoder decodes the single input multiple valued signal to N binary signal, and the selection circuits is composed N$\times$N array of the selecion cells with ROM types. The selection cell is realized with the current mirror circuits and the inhibit circuits. The presented circuit is suitable for designing the circuit of MVL functions with independent variables, and reduces the number of selection cells for designing the circuit of symmetric MVL functions as many as {($N^2$-N)/2}+N. This circuit possess features of simplicity. expansibility for array and regularity, modularity for the wire routing. Also, it is suitable for VLSI implementation.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.10
• /
• pp.10-18
• /
• 1992

This paper considers and implementation of the memory system which provides simultaneous access to pq image points of block(p$\times$q), horizontal vector(1$\times$pq)and/vertical vector(pq$\times$1) in 2-dimension image array, where p and q are design parameters. This memory system consists of an address calculation circuit, address routing circuit, data routing circuit, module selection circuit and m memory modules where m>qp. The address calculation circuit computes pq addresses in parallel by using the difference of addresses among image points. Extra module assignment circuit is not used by improving module selection circuit with routhing circuit. By using Verilog-XL logic simulator, we verify the correctness of the memory system and estimate the performance. The implemented system provides simultaneous access to 16 image points and is 6 times faster than conventional memory system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.6-12
• /
• 2014

The safety and reliability of the power system short-circuit current, the short-circuit current depends on the failure to obtain the objective is to quickly eliminate the breaking capacity of the circuit-breaker selection of the cable, the insulation of electrical equipment and protective relay an important factor in determining the level correction and protective relay selection scheme to be meaningful. Standards used in the domestic circuit breaker is applied to the production of IEC standard, but the American National Standards (ANSI / IEEE) by NEMA specification of the fault current calculations and the application of the asymmetric coefficient Korea. Therefore, in this paper, the IEC 60909 standard IEC breaker fault current calculation method and the method for selection of system configurations reviewed and protection system for reviewing the configuration of various protective relays appropriate correction and the correction value is main protection, back-up protection the equipment so that the period of protection relay coordination to minimize accidents and accident protection to minimize interruptions proposed for cooperation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.2
• /
• pp.1-9
• /
• 1980

A voltage synthesizing channel selection circuit was designed to improve on the conventional vol tape synthesizer which has been memorized each charnel's tuning vol cage itself. In the course of this study, tuning voltage was calculated by channel number entered from 10 keys. Then this circuit has tie function of direct access channel selection and rear display of channel number for the whole range of UHF and VHF, Attention was also given to realize the fine tuning by searching each commended channel, and the sequential selection by using 2keys, and the flash of channel indicator in case of inactive station.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.433-436
• /
• 2007

This paper analyzes how to calculate the three phase short-circuit currents for ac electrical system and select the high & low voltage circuit breaker based on IEC60609, IEC60056 and IEC60947-2 standards. We proposed the multiplying factor considering system time constant and circuit breaker rating to select circuit breaker accurately.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.175-178
• /
• 1996

Power system is becomming more and more complex and large. So system is stressed increasingly. This paper presents a method to select contingency ranking in power systems for EMS operation. Firstly, the proposed method is applied line outage using Thevenin equivalent circuit. Secondly, Contingency harmful to system is selected by loss variation between base case and fault. Thirdly, this paper prescribed simulated line sequence. Therefore this algorithm shows higher computation speed and effective memory use.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.349-352
• /
• 2003

A personal low-frequency stimulator is a portable device to relax muscle pains of a person. The stimulator generates combined low-frequency pulses to be applied to pads attached to painful muscles. This paper reports a development of such device with its characteristic analyses. The major components of our stimulator are MCU, high-voltage generating circuit part, high-voltage switching circuit part, input switch part and display unit. High-voltage generating circuit is designed by using a boost converter circuit and allows user control of the output voltage. High-voltage switching circuit, controlled by MCU, generates output voltage to be applied to pads. Input switch part is composed of power supply, intensity selection, mode selection and memory. Display unit adopts a text LCD module to display modes, Intensity, output frequency and user set-up time. Our designed safety circuit, to protect human body from possible electric shock, slowly increases the output voltage to the selected output intensity. It continuously checks the output pulse shape and disable the output when dangerous pulses are detected. This paper also shows some experimental results.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.554-560
• /
• 2019

Excore Nuclear Flux Monitoring System in Nuclear Power Plant monitors continuous reactor power up to maximum 200%. The monitoring method, however, has to be different depending on the reactor power level. Because the logarithmic pulse signals must be counted and processed exactly due to large uncertainty if their levels are low, on the other hand, they must be processed through statistical methodolgies if theirs are high to get exact monitoring values, in point of thermal degradation view. Therefore, we developed thermal degradation input signal selection circuit to transfer low level reactor power monitoring circuit to high level reactor power circuit at rated value in this paper. We proved their validities through testing them using real data used in nuclear power plant and analyzed their results. And, These methods will be used to measure the neutron level of excore nuclear flux monitoring system in nuclear power plant.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.437-444
• /
• 2015

In simulation-based circuit optimization, many simulation runs may be wasted while evaluating infeasible designs, i.e. the designs that do not meet the constraints. To avoid such a waste, this paper investigates the use of support vector machine (SVM) classifiers in predicting the design's feasibility prior to simulation and the optimal selection of the SVM parameters, namely, the Gaussian kernel shape parameter ${\gamma}$ and the misclassification penalty parameter C. These parameters affect the complexity as well as the accuracy of the model that SVM represents. For instance, the higher ${\gamma}$ is good for detailed modeling and the higher C is good for rejecting noise in the training set. However, our empirical study shows that a low ${\gamma}$ value is preferable due to the high spatial correlation among the circuit design candidates while C has negligible impacts due to the smooth and clean constraint boundaries of most circuit designs. The experimental results with an LC-tank oscillator example show that an optimal selection of these parameters can improve the prediction accuracy from 80 to 98% and model complexity by $10{\times}$.